个人简历

教育经历
2005.09 —2009.06，哈尔滨工业大学化学工程与技术专业，获得工学博士学位
2003.09 —2005.07，哈尔滨工业大学应用化学专业，获得工学硕士学位
1999.09 —2003.07，哈尔滨工业大学化学工程与工艺专业，获得工学学士学位

工作经历
2014.01—至今，北京理工大学 化工与环境学院 副院长
2013.07 —至今，北京理工大学 化工与环境学院 副教授
2009.09 —2013.07，北京理工大学 化工与环境学院 讲师

近期论文

1.Xiaoming Hao, Yajie Liu, Zhenhua Wang*, Jinshuo Qiao, Kening Sun. A novel sintering method to obtain fully dense gadolinia doped ceria by applying a direct current. Journal of Power Sources,2012 (210): 86-91
2.Yajie Liu, Xiaoming Hao, Zhenhua Wang*, Jiawei Wang, Jinshuo Qiao, Yiming Yan, Kening Sun. A newly-developed effective direct current assisted sintering technique for electrolyte film densification of anode-supported solid oxide fuel cells. Journal of Power Sources, 2012 (215): 296-300
3.Zhongliang Lou, Jinshuo Qiao, Yiming Yan, Jun Peng, Zhenhua Wang*, Taizhi Jiang, Kening Sun*. Synthesis and characterization of aluminum-doped perovskites as cathode materials for intermediate temperature solid oxide fuel cells. International Journal of Hydrogen Energy, 2012 (15): 11345-11350
4.Zhongliang Lou, Jun Peng, Ningning Dai, Jinshuo Qiao, Yiming Yan, Zhenhua Wang*, Jiawei Wang, Kening Sun. High performance La3Ni2O7 cathode prepared by a facile sol–gel method for intermediate temperature solid oxide fuel cells. Electrochemistry Communications, 2012 (22): 97-100
5.Zhenhua Wang, Cheng Xu, Zhongliang Lou, Jinshuo Qiao, Baiyu Ren, Kening Sun*. Preparation and characterization of silver-modified La0.8Sr0.2MnO3 cathode powders for solid oxide fuel cells by chemical reduction method. International Journal of Hydrogen Energy, 2013 (38): 1074-1081
6.Ningning Dai, Zhongliang Lou, Zhenhua Wang, Xiaoxi Liu, Yiming Yan, Jinshuo Qiao, Taizhi Jiang, Kening Sun, Synthesis and electrochemical characterization of Sr2Fe1.5Mo0.5O6–Sm0.2Ce0.8O1.9 composite cathode for intermediate-temperature solid oxide fuel cells. Journal of Power Sources, 2013 (243):766-772
7.Taizhi Jiang, Yajie Liu, Zhenhua Wang*, Wang Sun, Jinshuo Qiao, Kening Sun. An improved direct current sintering technique for proton conductor e BaZr0.1Ce0.7Y0.1Yb0.1O3: The effect of direct current on sintering process, Journal of Power Sources, 2014 (248): 70-76
8.Taizhi Jiang, Zhenhua Wang*, Baiyu Ren, Jinshuo Qiao, Wang Sun, Kening Sun*. Compositionally continuously graded cathode layers of (Ba0.5Sr0.5)(Fe0.91Al0.09)O3-δ-Gd0.1Ce0.9O2 by wet powder spraying technique for Solid Oxide Fuel Cells. Journal of Power Sources, 2014 (247): 858-864
9.Zhongliang Lou, Ningning Dai, Zhenhua Wang*, Yinglei Dai, Yiming Yan, Jinshuo Qiao, Jun Peng, Jiawei Wang, Kening Sun*. Preparation and electrochemical characterization of Ruddlesden–Popper oxide La4Ni3O10 cathode for IT-SOFCs by sol–gel method. J Solid State Electrochem (2013) 17:2703–2709
10.Taizhi Jiang, Zhenhua Wang*, Xiaoming Hao, David Rooney, Yajie Liu, Wang Sun, Jinshuo Qiao, Kening Sun. Understanding the flash-sintering of rare earth doped ceria for Solid Oxide Fuel Cell. Journal of the American Ceramic Society (2015) DOI: 10.1111/jace.13526
11.Zhongliang Lou, Jun Peng, Zhenhua Wang*, David Rooney, Kening Sun. Preparation of La2NiO4+δ powders as a cathode material for SOFC via a PVP-assisted hydrothermal route. J Solid State Electrochem (2014) DOI 10.1007/s10008-014-2667-9
12.Xiong Jiang, Zhenhua Wang*, David Rooney, Xiaoxue Zhang, Jie Feng, Jinshuo Qiao, Wang Sun, Kening Sun. A design strategy of large grain lithium-rich layered oxides for lithium-ion batteries cathode. Electrochimica Acta 160 (2015) 131–138
13.Xiaoming Hao, Dongdong Han, Jiawei Wang, Yajie Liu, David Rooney, Wang Sun, Jinshuo Qiao, Zhenhua Wang*, Kening Sun. Co-tape casting fabrication, field assistant sintering and evaluation of a coke resistant La0.2Sr0.7TiO3-Ni/YSZ functional gradient anode supported solid oxide fuel cell. International Journal of Hydrogen Energy, 2015 (40): 12790-12797
1、北京市科委重点实验室/工程中心评审专家。
2、ACS Applied materials & interfaces, J. Power Sources, Electrochem Commun, Int. J. Hydrogen Energy, Electrochimica Acta等国际期刊审稿人。