研究领域

1.三维光学诊断的算法开发和实验技术
2. 复杂流动/燃烧系统的机理分析"研究项目：
1) 缸内喷雾结构的跨界面高精度三维层析测量方法研究（主持），国家自然科学基金青年项目，￥210

近期论文

待发表论文：
1) 何旭, 伍岳, 马骁, et al. 内燃机光学诊断试验平台和测试方法综述[J], submitted to 实验流体力学, in revision.
2) Liu F, Chen H, Shi Z, et al. An experimental investigation into the injection pressure effects on diesel spray and flame characteristics under extreme cold-start[J]. Submitted to Combustion and Flame.
3) Niu Q, Sun B, Wu Y, et al. Effects of intake valve opening duration on performance optimization of an Atkinson cycle engine under part load[J]. Submitted to Energy.
4) 凌晨, 伍岳. 三维层析诊断跨界面成像修正方法研究[J], 工程热物理学报, 2020, in press.
已发表期刊论文：
1) Liu N, Lei Q, Wu Y, et al. 3D tomography reconstruction improved by integrating view registration[J]. Applied optics, 2019, 58(10): 2596-2604.
2) Qin S, Wu Y, Wu D, et al. Experimental investigation of ventilated partial cavitation[J]. International Journal of Multiphase Flow, 2019, 113: 153-164.
3) Wu Y, Liu Y, Shao S, et al. On the internal flow of a ventilated supercavity[J]. Journal of Fluid Mechanics, 2019, 862: 1135-1165.
4) Dasari T, Wu Y, Liu Y, et al. Near-wake behaviour of a utility-scale wind turbine[J]. Journal of Fluid Mechanics, 2019, 859: 204-246.
5) Liu N, Wu Y, Ma L. Quantification of tomographic PIV uncertainty using controlled experimental measurements[J]. Applied optics, 2018, 57(3): 420-427.
6) Ma L, Lei Q, Ikeda J, et al. Single-shot 3D flame diagnostic based on volumetric laser induced fluorescence (VLIF)[J]. Proceedings of the Combustion Institute, 2017, 36(3): 4575-4583.
7) Ma L, Wu Y, Xu W, et al. Comparison of 2D and 3D flame topography measured by planar laser-induced fluorescence and tomographic chemiluminescence[J]. Applied optics, 2016, 55(20): 5310-5315.
8) Lei Q, Wu Y, Xu W, et al. Development and validation of a reconstruction algorithm for three-dimensional nonlinear tomography problems[J]. Optics express, 2016, 24(14): 15912-15926.
9) Ma L, Lei Q, Wu Y, et al. From ignition to stable combustion in a cavity flameholder studied via 3D tomographic chemiluminescence at 20 kHz[J]. Combustion and Flame, 2016, 165: 1-10.
10) Ma L, Wu Y, Lei Q, et al. 3D flame topography and curvature measurements at 5 kHz on a premixed turbulent Bunsen flame[J]. Combustion and Flame, 2016, 166: 66-75.
11) Wu Y, Xu W, Lei Q, et al. Single-shot volumetric laser induced fluorescence (VLIF) measurements in turbulent flows seeded with iodine[J]. Optics express, 2015, 23(26): 33408-33418.
12) Ma L, Lei Q, Wu Y, et al. 3D measurements of ignition processes at 20 kHz in a supersonic combustor[J]. Applied Physics B, 2015, 119(2): 313-318.
13) Xu W, Wickersham A J, Wu Y, et al. 3D flame topography obtained by tomographic chemiluminescence with direct comparison to planar Mie scattering measurements[J]. Applied optics, 2015, 54(9): 2174-2182.
14) Kang M W, Wu Y, Ma L. Fiber-based endoscopes for 3D combustion measurements: view registration and spatial resolution[J]. Combustion and flame, 2014, 161(12): 3063-3072.
15) Lei Q, Wu Y, Xiao H, et al. Analysis of four-dimensional Mie imaging using fiber-based endoscopes[J]. Applied optics, 2014, 53(28): 6389-6398.
16) Wu Y, Lei Q, Ma L. Experimental demonstration of 4D imaging in two-phase flows based on computed tomography at 5 kHz[J]. Applied optics, 2014, 53(24): 5547-5553.
已发表会议论文：
1) 凌晨, 伍岳. 三维层析诊断跨界面成像修正方法研究[C], In:工程热物理学会燃烧学年会, 天津, 中国, 2019.
2) Hong, J, Dasari T, Wu Y, et al. Velocity field and coherent structures in the near wake of a utility-scale wind turbine[C]. In: Aps Meeting, Boston, Massachusetts, USA, 2019.
3) Wu Y., Liu, Y., Shao, S., & Hong, J. Probe into internal flow structures of a ventilated supercavity[C]. In: Journal of Physics: Conference Series, Baltimore, Maryland, USA, 2018.
4) Hong J, Dasari T, Wu Y, et al. Velocity field and coherent structures in the near wake of a utility-scale wind turbine[C]. In: APS Meeting, Denver, Colorado, USA, 2017.
5) Wu Y, Lei Q, Xu W, et al. 5 kHz VLIF (Volumetric Laser Induced Fluoresence) Measurements in Turbulent Flows Seeded with Iodine[C]. In: 32nd AIAA Aerodynamic Measurement Technology and Ground Testing Conference. Washington, DC, USA, 2016.
6) Wu Y, Lei Q, Ma L. 4D imaging in two phase flows using tomographic Mie scattering[C]. In: Fall Fluid Mechanics Symposium, Blacksburg, Virginia, USA, 2015.
7) Wu Y, Lei Q, Ma L. High speed and multidimensional flow characterization based on nonintrusive optical techniques[C]. In: NAWEA 2015 Symposium at Virginia Tech, Blacksburg, Virginia, USA, 2015.
8) Wu Y, Lei Q, Ma L. Multidimensional Combustion and Propulsion Diagnostics using Fiber-Based Endoscopes[C]. In: SAE 2015 AeroTech Congress & Exhibition, Seattle, Washington, USA, 2015.
9) Wu Y, Lei Q, Ma L. High speed and multidimensional flow and flame diagnostics[C]. In: 2014 Fluid Mechanics Symposium, Blacksburg, Virginia, USA, 2014.
10) Lei Q, Xu W, Wu Y, et al. 20 kHz 3D measurements in a Mach 2 combustor based on tomographic chemiluminescence[C]. In: AIAA Aviation and Aeronautics Forum and Exposition, Washington DC, USA, 2016.
11) Wang H, Wu Y, Ma L.Thermal Management of Li-ion Batteries Employing Active[C]. In: SAE 2015 AeroTech Congress & Exhibition, Seattle, Washington, USA, 2015.
12) Wu Y, Ma, L. Inversion of scattering, absorption, and emission spectra for thermal-fluid measurements[C]. In: 2014 NanoRad (2nd International Workshop on Nano-Micro Thermal Radiation), Shanghai, China, 2014.
国际期刊论文审稿：
Proceedings of combustion institute, Combustion and flame, Optics Letters,measurement, Optica Applicata, Applied Mathematical Modelling, Optics express, Applied Optics, International Journal of Automotive Technology