个人简历

教学工作
本科生：工程材料、创新工程与实践
硕士生：材料现代分析方法
教育背景
1983~1994 在华中科技大学金属材料专业学习，获工学学士、工学博士学位。
工作经历
1994~1996 南京航空航天大学智能材料与结构研究所 博士后；
1996~2002 北京航空材料研究院先进复合材料国防重点实验室 高级工程师、研究员、专业组长；
2002~2003 香港大学、日本九州大学 访问研究员；
2003 至今 北京交通大学机电学院 教授。

研究领域

先进钢铁材料
陶瓷基及金属基复合材料
材料先进成形工艺
材料表面技术及功能材料
载运工具运行安全理论与技术
载运工具及基础设施检测与控制
载运工具运行环境及先进动力技术
载运工具新材料科学与技术
先进设计与制造（专业学位）
数字化制造技术与装备（专业学位）
车辆结构可靠性与优化（专业学位）
智能机器人技术（专业学位）
新型材料和结构力学行为与应用（专业学位）
机电系统流动传热与能源技术装备（专业学位）"专利
周洋

近期论文

论文/期刊
胡树郡,李世波,徐维民,张京,周洋,Cheng.Rapid preparation, thermal stability and electromagnetic interference shielding properties of two-dimensional Ti3C2 MXene.Ceramics International,2019,无(45)
李世波,贝国平,向卫华,翟洪祥,周洋,张志力,李翠伟.Controlling the oriented growth of Ti2SnC grains with carbon fiber as a reactive template in the Ti-Sn-C system.MATERIALS RESEARCH BULLETIN,2009,5(44)
李世波,向卫华,翟洪祥,周洋,李翠伟,张志力.Formation of a single-phase Ti3AlC2 from a mixture of Ti, Al and TiC powders with Sn as an additive.MATERIALS RESEARCH BULLETIN,2008,8-9(43)
李世波,贝国平,翟洪祥,张志力,周洋,李翠伟.The origin of driving force for the formation of Sn whiskers at room temperature.JOURNAL OF MATERIALS RESEARCH,2007,11(22)
李世波,贝国平,翟洪祥,周洋.Bimodal microstructure and reaction mechanism of Ti2SnC synthesized by a high-temperature reaction using Ti/Sn/C and Ti/Sn/TiC powder compacts.JOURNAL OF THE AMERICAN CERAMIC SOCIETY,2006,12(89)
沃少帅,黄振莺,蔡乐平,胡文强,王渊博,周洋,翟洪祥.High strengthening effects and excellent wear resistance of Ti3Al(Si)C2 solid solutions.International Journal of Applied Ceramic Technology,2019,5(16)
陆晓刚,李世波,张伟伟,于文波,周洋.Thermal shock behavior of a nanolaminated ternary boride: MoAlB.CERAMICS INTERNATIONAL,2019,7(45)
张志力,周洋.Mechanical alloying of elemental powders of Ti-X-C(X=Si, Al) ternary system.RARE METAL MATERIALS AND ENGINEERING,2006,SUPPL. 2(35)
李海燕,周洋,崔傲,李世波,黄振莺,翟洪祥.Ti3AlC2颗粒含量对Ti3AlC2/ZA27复合材料性能的影响.稀有金属材料与工程,2018,4(47)
高立强,周洋,翟洪祥,李世波.Mn＋1AXn三元层状陶瓷增强铜基复合材料的研究进展.材料导报,2006,F11(20)
周洋,李斌太,袁广江,仝建峰,陈大明,翟洪祥.Si3N4基层状复合陶瓷材料的室温与高温性能.稀有金属材料与工程,2005,z1(None)
周洋,蒋三生,李世波,李翠伟,张志力,黄振莺,翟洪祥.反应烧结Si3N4透波陶瓷的制备与能研究.材料工程,2010,z2(None)
刘秋平,周洋,段延栋,王敏,林原.Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by Zn plus Mg co-doped TiO2 electrode.ELECTROCHIMICA ACTA,2013,None(95)
蒋三生,周洋.一种卫星导航天线罩凝胶成型模具的设计与3D打印.陶瓷学报,2019,2(40)
李润丰,周洋,Xili.A novel composite phase change material with paraffin wax in tailings porous ceramics.APPLIED THERMAL ENGINEERING,2019,None(151)
李润丰,周洋,李翠伟,李世波,黄振莺.Recycling of industrial waste iron tailings in porous bricks with low thermal conductivity.CONSTRUCTION AND BUILDING MATERIALS,2019,None(213)
胡文强,黄振莺,郑光明,王渊博,雷聪,蔡乐平,翟洪祥,周洋.Optimizing the microstructure and mechanical behaviors of in-situ TiC-γ′/Ni composites by subsequent thermal treatment.Journal of Alloys and Compounds,2019,None(774)
蔡乐平,黄振莺,胡文强,雷聪,翟洪祥,周洋.Dry sliding behaviors and friction surface characterization of Ti3Al0.8Si0.2Sn0.2C2 solid solution against S45C steel.Ceramics International,2019,2(45)
雷聪,翟洪祥,黄振莺,胡文强,蔡乐平,陈思雨,于文波,周洋.Fabrication, microstructure and mechanical properties of co-continuous TiCx/Cu-Cu4Ti composites prepared by pressureless-infiltration method.Ceramics International,2019,45(0)
姜吉鹏,李世波,于文波,周洋.Microstructural characterization and abrasive wear resistance of a high chromium white iron composite reinforced with in situ formed TiCx.MATERIALS CHEMISTRY AND PHYSICS,2019,None(224)
胡树郡,李世波,李浩林,周洋.Oxyacetylene torch testing and microstructural characterization of a Cr2AlC ceramic.JOURNAL OF ALLOYS AND COMPOUNDS,2018,None(740)
姜吉鹏,李世波,胡树郡,周洋.Effects of in situ formed TiCx on the microstructure, mechanical properties and abrasive wear behavior of a high chromium white iron.MATERIALS CHEMISTRY AND PHYSICS,2018,None(214)
张京,李世波,胡树郡,周洋.Chemical Stability of Ti3C2 MXene with Al in the Temperature Range 500-700 degrees C.MATERIALS,2018,10(11)
刘杰,李世波,姚伯祥,胡树郡,张京,于文波,周洋.Rapid synthesis and characterization of a nanolaminated Fe2AlB2 compound.JOURNAL OF ALLOYS AND COMPOUNDS,2018,None(766)
刘杰,李世波,姚伯祥,张京,陆晓刚,周洋.Thermal stability and thermal shock resistance of Fe2AlB2.CERAMICS INTERNATIONAL,2018,13(44)
李润丰,周洋,郑涌,孙智勇,李翠伟,黄振莺.烧结温度对铁尾矿多孔陶瓷结构及性能的影响.稀有金属材料与工程,2018,S1(None)
郑涌,周洋,冯亦得,颜世韬,李润丰,于文波,黄振莺,李世波.Synthesis and mechanical properties of TiC-Fe interpenetrating phase composites fabricated by infiltration process.Ceramics International,2018,17(44)
蒋三生,周洋.基于凝胶注模成型的Si3N4/Si坯体制备及性能分析.陶瓷学报,2018,3(39)
李润丰,周洋,李世波,李翠伟,黄振莺.北京地区细颗粒铁尾矿烧结过程与机理研究.建筑材料学报,2018,4(21)
赖建宏,周洋,郑涌,王嘉琪,黄振莺,李世波,翟洪祥.Preparation and Property of Bi-continuous Phase TiC/Fe Composite.Cailiao Yanjiu Xuebao/Chinese Journal of Materials Research,2017,10(31)
胡文强,黄振莺,蔡乐平,雷聪,翟洪祥,周洋.Exploring the interfacial state and tensile behaviors in nickel matrix composite with in-situ TiC and γ′-Ni3(Al,Ti) reinforcements..Journal of Alloys and Compounds,2018,10(765)
赖建宏,周洋,郑涌,王嘉琪,黄振莺,李世波,翟洪祥.双连续TiC/Fe复合材料的制备和性能.材料研究学报,2017,10(31)
王文娟,翟洪祥,陈路路,周洋,黄振莺.Sintering and properties of mechanical alloyed Ti3AlC2-Cu composites.Materials Science & Engineering A,2017,2(685)
郑涌,周洋,王嘉琪,李鸿宇,李世波,黄振莺,李翠伟,翟洪祥.高体积含量TiC/Fe复合材料的制备及力学性能.稀有金属材料与工程,2017,9(46)
郑涌,周洋,李润丰,王嘉琪,陈路路,李世波.Preparation and Mechanical Properties of TiC-Fe Cermets and TiC-Fe/Fe Bilayer Composites.Journal of Materials Engineering and Performance,2017,10(26)
姜吉鹏,李世波,李浩林,周洋.Effect of in situ formed TiCx grains on the microstructural modification of high Cr white iron.Journal of Alloys and Compounds,2017,14(726)
胡树郡,李世波,李浩林,周洋.Large-scale growth of TiB2 hexagonal sheets.Journal of Alloys and Compounds,2017,1(690)
张林泉,李世波,陈晓东,周洋.Abnormal thermal shock behavior in electrical conductivity of Ti2SnC.Progress in Natural Science: Materials International,2017,1(27)
李浩林,李世波,毛焕,周洋.Synthesis and mechanical and thermal properties of (Cr,Mn)2AlC solid solutions.Advances in Applied Ceramics,2017,116(3)
李世波,张林泉,于文波,周洋.Precipitation induced crack healing in a Ti2SnC ceramic in vacuum.ceramics international,2017,9(43)
胡文强,黄振莺,蔡乐平,雷聪,翟洪祥,郝素明,于文波,周洋.Preparation and mechanical properties of TiCx-Ni3(Al,Ti)/Ni composites synthesized from Ni alloy and Ti3AlC2 powders.Materials Science & Engineering A,2017,6(697)
蔡乐平,黄振莺,胡文强,郝素明,翟洪祥,周洋.mechanical properties, and tribological behaviors of Ti2AlC and Ti2AlSn0.2C solid solutions.Journal of Advanced Ceramics,2017,2(6)
李海燕,周洋,路金蓉,郑涌,陈晨,李世波,黄振莺,李翠伟,翟洪祥.烧结温度对Ti3AlC2/ ZA27复合材料性能的影响.稀有金属材料与工程,2016,1(45)
黄振莺,王雅正,翟洪祥,李萌启,周洋.原位自生TiC0.67/Cu(Al)复合材料的高温压缩特性及杨氏模量.稀有金属材料与工程,2015,Suppl.1(vol.44)
李海燕,周洋,崔傲,郑涌,黄振莺,翟洪祥,李世波.Ti3SiC2 Reinforced ZA27 Alloy Composites with Enhanced Mechanical Properties.Int. J. Appl. Ceram. Technol.,2016,4(13)
李浩林,李世波,张林泉,周洋.Synthesis and ultra-high temperature ablation behavior of a ZrC/Cr2AlC composite.Ceramics International,2016,5(42)
李浩林,李世波,杜雪松,周洋.Thermal shock behavior of Cr2AlC in different quenching media.Materials Letter,2016,0(167)
李翠伟,翟洪祥,丁艳,周洋,李世波,张志力.Study of Ti3Si1.2-xAlxC2 x = 0- 1.2 solid solution via X-ray diffraction.Key Engineering Materials,2007,SII(336-338)
陈新华,翟洪祥,李世波,周洋,黄振莺.Preparation of Bulk Ti2AlC Using Ti3AlC2 Powders as a Starting Material.Advanced Materials Research,2010,2(105-106)
李翠伟,翟洪祥,周洋,李世波,张志力.Synthesis of Ti3Si0.4Al0.8C1.8 solid solution.Key Engineering Materials,2008,1-2(368-372)
李萌启,翟洪祥,黄振莺,刘晓涵,周洋,李世波,李翠伟.Tensile behavior and strengthening mechanism in ultrafine TiC0.5 particle reinforced Cu-Al matrix composites.Journal of Alloys and Compounds,2015,628(1)
路金蓉,周洋,郑涌,李海燕,李世波.Interface structure and wetting behavior of Cu/Ti3SiC2 system.Advances in Applied Ceramics,2014,1(114)
李世波,Bei,Chen,张林泉,周洋,Mackovic.Crack healing induced electrical and mechanical properties recovery in a Ti2SnC ceramic.J Euro Ceram Soc,2015,1(36)
李海燕,周洋,陈晨,郑涌,路金蓉,李世波,黄振莺.Microstructure and mechanical properties of Zn based composites reinforced by Ti3AlC2.Advances in Applied Ceramics,2015,6(114)
许浩,黄振莺,翟洪祥,李萌启,刘晓涵,周洋.Fabrication, Mechanical Properties, and Tribological Behaviors of Ti3Al0.8Sn0.4C2 Solid Solution by Two-Time Hot-Pressing Method.International journal of Applied Ceramic Technology,2015,4(12)
黄振莺,许浩,翟洪祥,王雅正,周洋.Strengthening and tribological surface self-adaptability of Ti3AlC2.Ceramics International,2015,1(41)
路金蓉,周洋,李海燕,郑涌,李世波,黄振莺.Cu/Ti3SiC2 体系润湿性及润湿过程的研究.无机材料学报,2014,12(29)
李浩林,李世波,陈晓东,周洋.Spontaneous pulverization of Al4C3 containing MAX bulk materials at room temperature.Advances in Applied Ceramics: Structural, Functional and Bioceramics,2014,3(113)
李浩林,李世波,周洋.Cyclic thermal shock and crack healing behavior of a Cr2AlC ceramic.Mater Sci Eng A,2014,18(607)
黄振莺,翟洪祥,李萌启,刘晓涵,周洋.Friction Behaviors and Effects on Current-Carrying.Tribology Transactions,2014,1040-2004(57/2)
李世波,李浩林,周洋,翟洪祥.Mechanism for abnormal thermal shock behaviour of Cr2AlC. J Eur Ceram Soc,2014,5(34)
刘秋平,周洋.Zinc-doping in TiO2 films to enhance photovoltaic .第一届机械材料与制造工程国际学术会议,2012
刘秋平,周洋.Photovoltaic Performance Improvement of Dye-Sensitized Solar Cells Based on Al-Doped TiO2 Thin Films.ACTA PHYSICO-CHIMICA SINICA,2012,第3期(第28卷)
李世波,陈晓东,周洋,Song.Influence of grain size on high temperature oxidation behaviour of Cr2AlC ceramics .Ceramics International,2013,3(39)
李萌启,翟洪祥,黄振莺,刘晓涵,周洋,李世波,李翠伟.Microstructure and mechanical properties of TiC0.5 reinforced copper matrix composites.Materials Science and Engineering: A,2013,2013(588)
刘秋平,周洋.Enhanced conversion efficiency of dye-sensitized TiO2 solar cells (DSSCs) by Ca-doping. Journal of Alloys and Compunds,2012,2013(548)
刘秋平,周洋.Improved photovoltaic performance of dye-sensitized solar cells (DSSCs) by.Electrochimica Acta,2013,2013(95)
路金蓉,周洋,郑涌,李世波,黄振莺,翟洪祥.Effects of sintering process on the properties of Ti3SiC 2/Cu composite.Key Engineering Materials,2012,1(512-515)
刘秋平,周洋,黄惠娟,郭全江,赵贤辉,林原.Charge transmission and recombination in the dye-sensitized solar cells based on Mn-doped TiO2 thin films.Key Engineering Materials,2012,1(519)
刘秋平,周洋,段彦栋,王敏,赵贤辉,林原.Enhanced conversion efficiency of dye-sensitized titanium dioxide solar cells by Ca-doping.Journal of Alloys and Compounds,2013,1(548)
李世波,Song,周洋.A dense and fine-grained SiC/Ti3Si(Al)C2 composite and its high-temperature oxidation behavior.J Euro Ceram Soc,2012,12(32)
刘秋平,周洋,段彦栋,林原.Zinc-doping in TiO2 films to enhance photovoltaic performance of Dye- sensitized solar cells.Applied Mechanics and Materials,2011,4(66-68)
刘秋平,黄慧娟,周洋,段彦栋,孙庆文,林原.Photovoltaic Performance of Dye-Sensitized Solar Cells Based on Al-Doped TiO2 Thin Films.物理化学学报,2012,3(28)
路金蓉,周洋,孙建军,李世波,黄振莺,翟洪祥.高纯Ti3SiC2的合成及其反应机理.机械工程材料,2011,11(35)
孙建军,周洋,路金蓉,李世波,黄振莺,翟洪祥.Ti3SiC2/Cu复合材料的制备与性能.粉末冶金材料科学与工程,2011,4(16)
周洋,蒋三生,李世波,李翠伟,张志力,黄振莺,翟洪祥.反应烧结Si3N4透波陶瓷的制备与性能研究.材料工程,2010,增刊2(2010)
路金蓉,周洋,孙建军,李世波,黄振莺,翟洪祥.组分对Ti3SiC2/Cu复合材料性能的影响.材料工程,2010,增刊2(2010)
颜世韬,周洋,邢希,李世波,翟洪祥.钙钛矿型La1-xBxMnO3(B=Sr,Ca)粉体及块体材料的制备研究.材料工程,2010,增刊2(2010)
李翠伟,王文娟,翟洪祥,周洋,李世波.Ti3Si0.6Al0.6C1.98陶瓷的制备与性能研究.稀有金属材料与工程,2009,s2(38)
张志力,翟洪祥,周洋.Preparation of Composites from Al and Ti3AlC2 and Its Tribo-Chemistry Reactions Against Low Carbon Steel.Key Engineering Materials,2009,2(Vols. 368-372)
李世波,向卫华,翟洪祥,周洋.Formation of TiC hexagonal platelets and their growth mechanism.Powder Technology,2008,1(185)
李翠伟,丁艳,翟洪祥,周洋,李世波,张志力.Synthesis of Ti3Si0.8Al0.4C1.8 solid solutions from Ti-Si-Al-C powder mixture.Materials Letters,2007,16(61)
高立强,周洋,翟洪祥,李世波,张志力,李翠伟.Ti3AlC2/Cu复合材料的制备及其性能研究.稀有金属材料与工程,2007,Suppl.1(36)
周洋,高立强,翟洪祥,李世波,张志力,李翠伟.一种碳化硅粉体的处理及其沉淀行为.稀有金属材料与工程,2007,Suppl.1(36)
贝国平,李世波,翟洪祥,周洋.Ti2SnC粉末的合成及其反应机制的研究.航空材料学报,2007,3(27)
张志力,翟洪祥,周洋.Effect of Y2O3 on Tribological Properties of Ti3SiC2/Al Composite.Key Engineering materials,2007,336-338: 1433-1435(336-338)
张志力,周洋.Ti-X-C(X=Si,Al)三元体系的元素机械合金化.稀有金属材料与工程,2006,Suppl.2(35)
翟洪祥,黄振莺,周洋.Ti3AlC2 — A Soft Ceramic Exhibiting Low Friction Coefficient.Mater. Sci. Forum,2005,1(475－479)
艾明星,黄振莺,翟洪祥,周洋.Al/Ti3SiC2复合材料的制备.稀有金属材料与工程,2005,增刊1(34)
翟洪祥,黄振莺,周洋.Frictional Layer and Its Antifriction Effect in High-Purity Ti3SiC2 and TiC-Contained Ti3SiC2..Key Eng. Mater.,2004,1(280-283)
黄振莺,翟洪祥,周洋.Sliding Friction Behavior of Bulk Ti3SiC2 under Different Normal Pressures..Key Eng. Mater.,2004,1(280-283)
李世波,翟洪祥,周洋,张志力.原位合成Ti3SiC2/SiC复合材料及其显微组织的观察.稀有金属材料与工程,2005,增刊1(34)
翟洪祥,黄振莺,周洋.Oxidation layer in sliding friction surface of high-purity Ti3SiC2.Journal of Materials Science,2004,(69)
周洋,袁广江.Si3N4基层状复合陶瓷材料的室温与高温性能研究.第十三届全国高技术陶瓷学术年会论文摘要集,2004
张志力,李世波,周洋.Mn+1AXn的元素机械合金化过程.第十三届全国高技术陶瓷学术年会论文摘要集,2004
李世波,翟洪祥,周洋.原位合成Ti3SiC2/SiC复合材料及其显微组织的观察.第十三届全国高技术陶瓷学术年会论文摘要集,2004
黄振莺,周洋,翟洪祥.Ti3AlC2的滑动摩擦系数与摩擦表面的氧化行为.第十三届全国高技术陶瓷学术年会论文摘要集,2004
翟洪祥,周洋,黄振莺.Ti3AlC2 — A Soft Ceramic Exhibiting Low Friction Coefficient.Mater. Sci. Forum,2005,1(475－479)
翟洪祥,黄振莺,周洋.Ti3AlC2 — A Soft Ceramic Exhibiting Low Friction Coefficient.Mater. Sci. Forum,2005,1(475－479)
周洋,翟洪祥,黄振莺,艾明星.Influence of Toughening Method on Microstructures and Mechanical Properties of Alumina-Matrix Composites..Materials Science Forum,2005,1(475-479)
翟洪祥,周洋,黄振莺.Ti3AlC2--A Soft Ceramic Exhibiting Low Friction Coeffcient.Proceedings of the 5th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-5),2004
艾明星,周洋,翟洪祥.Al/Ti3SiC2金属陶瓷的制备及其性能研究.第十三届全国高技术陶瓷学术年会论文摘要集,2004
周洋,黄振莺,翟洪祥.Influence of Toughening Method on Microstructures and Mechanical Properties of Alumina-Matrix Composites.PRICM-5 Proceedings of the 5th Pacific Rim International Conference on Advanced Materials,2004
翟洪祥,黄振莺,周洋.Ti3AlC2 — A Soft Ceramic Exhibiting Low Friction Coefficient.Mater. Sci. Forum,2005,1(475－479)
翟洪祥,周洋,黄振莺,艾明星.Tribophysics Properties of Bulk Polycrystalline Ti3AlC2.J. Am.Ceram. Soc.,2005,11(88)
周洋,翟洪祥.Si3N4基层状复合陶瓷材料的室温与高温性能研究.稀有金属材料与工程,2005,6(34)
周洋,艾明星,翟洪祥,黄振莺.Influence of Loading Conditions on Cyclic Compressive Fatigue Behavior of an Al2O3 Matrix Composite..Key Engineering Materials,2005,280-283(280-283)
周洋,Tomokazu.Effect of Surface Treatment on Dispersibility and EPD Behavior of Fine SiC Powder in Aqueous Suspension.Journal of the Ceramic Society of Japan,2004,5(112)
专著/译著
周洋. 层状陶瓷复合材料技术研究. 益小苏主编, 先进复合材料技术研究与发展, 国防工业出版社, 北京, 2006: 385~394
周洋. 层状陶瓷复合材料. 师昌绪, 李恒德, 周廉主编, 材料科学与工程手册 (下卷), 化学工业出版社, 北京, 2004: 9-66~9-71
周洋, 吴学仁, 方岱宁, 郑泉水, 颜悦, 魏悦广. 典型先进材料的强韧化设计与实现. 黄克智, 王自强主编, 材料的宏微观力学与强韧化设计, 清华大学出版社, 北京, 2003: 246~285