个人简历

基本情况

1992-1996年于北京航空航天大学飞行器设计与应用力学系学习并获工学学士学位。1996-2001年于北京航空航天大学固体力学专业学习并获工学博士学位；2001年-2003年到清华大学工程力学系进行博士后研究工作。2003年10月到北京航空航天大学宇航学院任教。2008年-2009年赴英国南安普敦大学工程科学系进行学术访问。2010年-2011于中国商用飞机有限责任公司北京民用飞机技术研究中心挂职锻炼。
获得第二届中国复合材料青年科学家奖、2016年杜庆华力学与工程奖优秀青年学者奖，2016何鸿燊奖教金一等奖，2011北航科学技术奖二等奖等多项奖励。

主要科研业绩：

长期从事飞行器结构的破坏理论和力学设计研究，特别在先进复合材料结构方面，发展了先进复合材料结构宏微观多重模式损伤耦合扩展的渐进失效理论，建立了全复合材料非平面胶接连接的破坏理论，提出一系列高精度的复合材料螺栓连接的失效预测方法。研究成果解决了6个航天型号归零难题，并在航空航天5个型号研制中发挥了重要作用。
主持国家自然科学基金3项，工信部民机专项科研项目1项，863项目3项，航空、航天院所型号预研和攻关项目30余项。以第一作者出版工信部“十二五”规划专著《先进复合材料连接结构分析方法》，发表SCI论文40余篇、EI论文45篇，授权发明专利16项，登记软件著作权10项。


主讲课程

l本科生必修课《飞行器结构力学》
l本科生限选课《飞行器结构动力学》
l研究生选修课《高等结构分析方法》
l留学生选修课《Structural dynamics》

研究领域

飞行器结构分析与优化设计
复合材料结构的破坏理论和力学设计
多场条件下多功能结构设计

近期论文

1. Fengrui Liu, Xuheng Lu,Libin Zhao（*）, Jianyu Zhang（*）, Ning Hu, Jifeng Xu. An interpretation of the load distributions in highly torqued single-lap composite bolted joints with bolt-hole clearances. Composites Part B (2017), doi: 10.1016/j.compositesb.2017.11.027.
2. Yu Gong,Libin Zhao（*）, Jianyu Zhang（*）, Ning Hu. An improved power law criterion for the delamination propagation with the effect of large-scale fiber bridging in composite multidirectional laminates.Composite Structures, 2018, 184: 961-968.
3. Libin Zhao（*）, Yang Li, Jianyu Zhang（*）, Longwei Zhou, Ning Hu. A novel material degradation model for unidirectional CFRP composites. Composites Part B, 2018, 135: 84-94.
4. Yu Gong,Libin Zhao（*）, Jianyu Zhang（*）, Yana Wang, Ning Hu. Delamination propagation criterion including the effect of fiber bridging for mixed-mode I/II delamination in CFRP multidirectional laminates. Composites Science and Technology, 2017, 151: 302-309.
5. Libin Zhao, Yana Wang, Jianyu Zhang（*）, Yu Gong, Zizi Lu, Ning Hu, Jifeng Xu. An interface-dependent model of plateau fracture toughness in multidirectional CFRP laminates under mode I loading. Composites Part B, 2017, 131: 196-208.
6. Libin Zhao, Meijuan Shan, Haiming Hong, Dexuan Qi, Jianyu Zhang, Ning Hu. A residual strain model for progressive fatigue damage analysis of composite structures. Composite Structures, 2017, 169, 69-78.
7. Libin Zhao（*）, Meijuan Shan, Fengrui Liu, Jianyu Zhang（*）. A probabilistic model for strength analysis of composite double-lap single-bolt joints. Composite Structures, 2017, 161: 419-427.
8. Libin Zhao（*）, Yana Wang, Jianyu Zhang（*）, Yu Gong, Ning Hu, Ning Li. XFEM-based model for simulating zigzag delamination growth in laminated composites under mode I loading. Composite Structures, 2017, 160: 1155-1162.
9. Libin Zhao, An Xin, Fengrui Liu, Jianyu Zhang（*）, Ning Hu. Secondary bending effects in progressively damaged single-lap, single-bolt composite joints. Results in Physics, 2016, 6: 704-711.
10.Libin Zhao,Yu Gong, Jianyu Zhang（*）, Yana Wang, Zizi Lu, Lei Peng, Ning Hu. A novel interpretation of fatigue delamination growth behavior in CFRP multidirectional laminates. Composites Science and Technology, 2016, 133: 79-88.
11.Jianyu Zhang（*）, Longwei Zhou, Yuli Chen,Libin Zhao, Binjun Fei. A micromechanics-based degradation model for composite progressive damage analysis. Journal of Composite Materials. 2016, 50(16): 2271-2287.
12.Jie Zhi,Libin Zhao（*）, Jianyu Zhang, Zhanli Liu. A numerical method for simulating the microscopic damage evolution in composites under uniaxial transverse tension. Applied Composite Materials. 2016, 23(3): 255-269.
13.Longwei Zhou, Donghua Zhang,Libin Zhao（*）, Xiaohong Zhou, Jianyu Zhang, Fengrui Liu. Design and analysis of a novel bolted composite π joint under bending load. Materials and Design. 2016, 98: 201-208.
14.Libin Zhao, Jie Zhi, Jianyu Zhang（*）, Zhanli Liu, Ning Hu. XFEM simulation of delamination in composite laminates. Composites Part A. 2016, 80: 61-71.
15.Jianyu Zhang, Dexuan Qi, Longwei Zhou,Libin Zhao（*）, Ning Hu. A progressive failure analysis model for composite structures in hygrothermal environments. Composite Structures. 2015, 133: 331-342.
16.Jianyu Zhang,Libin Zhao（*）, Ming Li, Yuli Chen. Compressive fatigue behavior of low velocity impacted and quasi-static indented CFRPlaminates. Composite Structures. 2015, 133:1009-1015.
17.Fengrui Liu, Jianyu Zhang（*）,Libin Zhao, An Xin, Longwei Zhou. An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances. Composite Structures. 2015, 131:625-636.
18.Jianyu Zhang, Meijuan Shan,Libin Zhao（*）, Binjun Fei. An average failure index method for the tensile strength prediction of composite adhesive-bonded π joints. J of Wuhan University of Technol-Mater. Sci. Ed. 2015, 30(2): 292-301.
19.Libin Zhao, Tianliang Qin, Jianyu Zhang（*）, Yuli Chen. 3D gradual material degradation model for progressive damage analyses of unidirectional composite materials. Mathematical Problems in Engineering. 2015: 145629: 1-11.
20.Jianyu Zhang, Fengrui Liu,Libin Zhao（*）, Meijuan Shan. Investigation on characteristic length testing methods for failure prediction of composite multi-bolt joints. Journal of Reinforced Plastics and Composites. 2015, 34(8): 636-648.
21.Jianyu Zhang, Fengrui Liu,Libin Zhao（*）, Jie Zhi, Longwei Zhou, Binjun Fei. Influence of end distances on the failure of composite bolted joints. Journal of Reinforced Plastics and Composites. 2015, 34(5):388-404.
22.Libin Zhao, Tianliang Qin, Jianyu Zhang（*）, Meijuan Shan, Binjun Fei. Determination method of stress concentration relief factors for failure prediction of composite multi-bolt joints. Journal of Composite Materials. 2015, 49(14): 1667-1680.
23.Libin Zhao, Yu Gong, Jianyu Zhang（*）, Chen Yuli, Fei Binjun. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements. Composite Structures. 2014, 116:509-522.
24.Libin Zhao（*）, Tianliang Qin, Yuli Chen, Jianyu Zhang. Three dimensional progressive damage models for cohesively bonded composite π joint. Journal of Composite Materials. 2014, 48(6):702-721.
25.Libin Zhao, Yana Wang, TianLiang Qin, Jianyu Zhang（*）. A new material model for 2D FE analysis of adhesively bonded composite joints. Materials Science (Medziagotyra). 2014, 20(4): 468-473.
26.Jianyu Zhang,Libin Zhao（*）,Tianliang Qin, Yue Fu, Binjun Fei. Influence of π overlaminates on the mechanical behavior of all-composite adhesively bonded π joints. Journal of Reinforced Plastics and Composites. 2014, v33(10):923-934.
27.Jianyu Zhang（*）, Fengrui Liu,Libin Zhao, Binjun Fei.A novel characteristic curve for failure prediction of multi-bolt composite joints. Composite Structures. 2014, 108:129-136.
28.Jianyu Zhang（*）, Fengrui Liu,Libin Zhao, Yuli Chen, Binjun Fei. A progressive damage analysis based characteristic length method for multi-bolt composite joints. Composite Structures. 2014, 108:915-923.
29.Fengrui Liu,Libin Zhao（*）, Saqib Mehmood, Jianyu Zhang, Binjun Fei. A modified failure envelope method for failure prediction of multi-bolt composite joints. Composites Science and Technology. 2013, 83:54-63.
30.Libin Zhao（*）, Yu Gong, Tianliang Qin, Saqib Mehmood, Jianyu Zhang. Failure prediction of out-of-plane woven composite joints using cohesive element. Composite Structures. 2013, 106:407-416.
31.Libin Zhao（*）, Tianliang Qin, Jianyu Zhang, Ramanand Ajit Shenoi. Modified Maximum Stress Failure Criterion for Composite π Joints. Journal of Composite Materials. 2013, 47(23): 2995-3008.
32.Yue Fu, Jianyu Zhang,Libin Zhao（*）. Strength prediction of composite π joint under bending load and study of geometric and material variations effects. Journal of Composite Materials. 2013, 47(8): 1029-1038.
33.Tianliang Qin,Libin Zhao, Jianyu Zhang（*）. Fastener effects on mechanical behaviors of double-lap composite joints. Composite Structures. 2013, 100:413-423.
34.Jiqiang Tang（*）, Yongbin Zhang, Shuzhi Sam Ge,Libin Zhao. Hollow interference fitted multi-ring composite rotor of the superconducting attitude control and energy storage flywheel. Journal of Reinforced Plastics and Composites, 2013, 32(12): 881-897.
35.Jianyu Zhang（*）, Lei Peng,Libin Zhao, Binjun Fei. Fatigue dlamination growth rates and thresholds of composite laminates under mixed mode loading. International Journal of Fatigue. 2012, 40: 7-15.
36.Lei Peng, Jifeng Xu（*）, Jianyu Zhang,Libin Zhao. Mixed mode delamination growth of multidirectional composite laminates under fatigue loading. Engineering Fracture Mechanics. 2012, 96: 676-686.
37.Libin Zhao, Xiaoxiao Zhang, Jianyu Zhang（*）, Hai Huang, Xianzhu Liang. Failure analysis of woven composite π joint under bending load. Advanced Science Letters. 2011, 4(8-10): 2752-2758.
38.Lei Peng, Jianyu Zhang（*）,Libin Zhao, Rui Bao, Hongqin Yang and Binjun Fei. Mode I delamination growth and thresholds of multidirectional composite laminates under fatigue loading. Journal of Composite Materials. 2011, 45(10): 1077-1090.
39.Libin Zhao, Tianliang Qin, R Ajit Shenoi（*）, Jianyu Zhang, xianzhu Liang, Hai Huang. Strength prediction of composite π joint under tensile load. Journal of Composite materials. 2010, 44(23):2759-2778.
40.赵丽滨，刘丰睿，黄伟，张建宇.复合材料螺栓连接失效分析研究进展.强度与环境. 2017, 44(3): 1-11.
41.张建宇，刘丰睿，山美娟，赵丽滨.复合材料多钉连接钉载矢量传感器.复合材料学报. 2015, 32(5): 83-90.
42.赵丽滨,山美娟,彭雷,季少华,贾西文,徐吉峰.制造公差对复合材料螺栓连接结构强度分散性的影响研究.复合材料学报，2015, 32(4): 1092-1098.
43.赵丽滨，秦田亮，山美娟，张建宇.基于渐进损伤分析的复合材料螺栓连接强度包线法研究.复合材料学报, 2015, 32(3): 823-830.
44.赵丽滨，秦田亮，李嘉玺，付月.复合材料结构三维有限元分析的材料参数模型研究.北京航空航天大学学报. 2010, 36(7): 789-793.
45.赵丽滨，彭雷，张建宇，秦田亮，梁宪珠，常海峰，黄海.复合材料接头拉伸力学性能的试验和计算研究,复合材料学报,2009; 26(2): 181-186.
46.刘丰睿,赵丽滨,韩邦成,房建成.磁悬浮控制力矩陀螺框架结构的拓扑优化设计.北京航空航天大学学报. 2010, 36(4): 455-458.
47.汤继强,张永斌,赵丽滨.过盈配合的金属轮毂-复合材料飞轮转子.光学精密工程. 2013, 21: 2639-2647.
48.赵丽滨,龙丽平,蔡庆云.列车风致脉动力下声屏障动力学性能研究.北京航空航天大学学报. 2009, 35(4): 505-508.
49.ZhangJianyu, Fu Yue,Zhao Libin, Fang Jiancheng.Analysis and Design of High-speed Flywheel on Satellite Energy Storage/Attitude Control System. Materials Science Forum. 2009, (610-613): 408-413.
50.赵丽滨,龙丽平,张建宇,韩邦成.反作用轮密封罩结构抗屈曲设计计算及试验研究.北京航空航天大学. 2008, 34(12): 1464-1468.
51.Zhao Libin, Zhang Jianyu, Zhao Youxuan. Taylor Series Method in structural dynamics. Advances Materials Research. 2008, 33-37: 1213-1220.
52.赵丽滨,秦田亮,黄海,梁宪珠,曹正华.某复合材料接头的强度估算.材料工程. 2007, S(1): 90-93.
53.Zhao Libin, Zhang Jianyu, Long Liping and Fei Binjun. Reliability Analysis of Multiple Site Damage Structure. Engineering Structural Integrity: Research development and application. 2007, 2: 948-951.
54.赵丽滨,赵友选,张建宇,韩邦成,房建成.反作用飞轮结构的动态优化设计.中国机械工程. 2007, 18(2): 139-142.
55.赵丽滨,张建宇,高晨光,韩邦成,房建成.基于结构可靠性的姿控/储能飞轮转子设计方法研究.宇航学报. 2006, 27(5): 942-946.
56.Zhao Libin, Yao Zhenhan. Fast Multipole BEM for 3-D Elastostatic Problems with Applications for Thin structures. Tsinghua Science and Technology. 2005.10(1): 67-75.
57.Zhao Libin, YaoZhenhan, Wang Shoumei.Stability and Accuracy Analysis for Taylor Series Numerical Method. Tsinghua Science and Technology. 2004, 9(1): 51-56.
58.Zhao Libin, YaoZhenhan, Wang Shoumei.Taylor Series Method in Nonlinear Structural Dynamics. Proceedings of the 5th international conference on vibration engineering. China Aviation Industry Press. 2002. 72-77.
59.赵丽滨,张建宇,王寿梅.非线性结构动响应的Taylor级数解法.北京航空航天大学学报, 2002, 28 (2): 153-156.
60.赵丽滨,张建宇,费斌军,王寿梅.疲劳多裂纹问题的Taylor级数解法.机械强度, 2001, 23 (2): 168-170.
61.赵丽滨,张建宇,王寿梅.精细积分方法的稳定性和精度分析.北京航空航天大学学报, 2000, 26(5): 569-572.
兼任中国复合材料学会监事会秘书；北京力学会副秘书长、固体力学专业委员会副主任委员；北方七省市力学学会学术工作委员会常务委员；国际华人计算力学学会执行委员会委员；航天一院一部科技委外聘专家等职。