个人简历

教育经历：
2012.09-2016.12　清华大学机械工程系，工学博士
2015.04-2016.01　麻省理工学院机械工程系，访问学生
2013.12-2014.01　韩国高等科学技术学院机械工程系，访问学生
2009.09-2013.05　合肥工业大学材料科学与工程学院，工学硕士
2005.09-2009.06　合肥工业大学材料科学与工程学院，工学学士

工作经历:
2017.07-至今　 北京科技大学，教师博士后/讲师

研究领域

轻量化材料塑性行为表征、塑性加工工艺、韧性断裂预测、 机械结构分析

近期论文

代表性论著:
[1] Qian L Y, Fang G, Zeng P. Modeling of the ductile fracture during the sheet forming of aluminum alloy considering non-associated constitutive characteristic [J], International Journal of Mechanical Science, 2017, 126:55-66.
[2] Qian L Y, Marcelo Paredes, Tomasz Wierzbicki, et al. Experimental and numerical study on shear-punch test of 6060 T6 extruded aluminum profile [J], International Journal of Mechanical Science. 2016, 118:205-218.
[3] Qian L Y, Fang G, Zeng P, et al. Experimental and numerical investigations into the ductile fracture during the forming of flat-rolled 5083-O aluminum alloy sheet [J]. Journal of Materials Processing Technology, 2015, 220: 264-275.
[4] Qian L Y, Fang G, Zeng P, et al. Correction of flow stress and determination of constitutive constants for hot working of API X100 pipeline steel [J]. International Journal of Pressure Vessels and Piping, 2015, 132: 43-51.
[5] Qian L Y, Fang G, Zeng P. Three-dimensional finite element analysis for flying shearing of X100 hot-rolled steel plate [J]. Procedia Engineering, 2014, 81: 2488-2493.
[6] Wang L X, Fang G, Qian L Y. Modeling of dynamic recrystallization of magnesium alloy using cellular automata considering initial topology of grains [J]. Materials Science and Engineering: A, 2018, 711(10): 268-283
[7] Wang L X, Fang G, Qian L Y, et al. Forming of magnesium alloy microtubes in the fabrication of biodegradable stents [J]. Progress in Natural Science: Materials International, 2014, 24(5): 500-506.
[8] 钱凌云，刘全坤，韩豫，等. 基于双线性强化模型的挤压凹模自增强技术研究 [J].机械工程学报, 2011, 47(12):26-31.
[9] 钱凌云, 刘全坤, 王成勇, 等. 厚壁圆筒自增强压力的优化分析 [J]. 中国机械工程, 2012, 23(4):474-479.
[10] 钱凌云, 刘全坤, 李亨, 等. 提高冷挤压凹模强度方法的研究现状与进展 [J]. 模具工业, 2011, 37(9): 1-5.
[11] 王成勇, 钱凌云, 陈从升, 等. 共享三维变换矩阵的模具工艺协同关键技术研究[J]. 中国机械工程，2012，23(1): 102-105.
[12] Theoretical Analysis and Finite Element Simulation of Autofrettage for Extrusion Die [J]. Advanced Materials Research, 2012, 472-475: 1749-1753.
[13] 钱凌云, 李洪庆. 汽车球头销冷挤压成形的数值分析及工艺优化[J]. 金属加工: 热加工, 2011 (13): 53-54.