个人简历

教育经历\r
2009.9 -- 2014.7 北京航空航天大学 固体力学 博士研究生毕业 工学博士学位\r
2007.9 -- 2009.7 北京航空航天大学 飞行器设计 研究生 硕博连读\r
2003.9 -- 2007.7 北京航空航天大学 飞行器设计与工程（航天） 大学本科毕业 工学学士学位\r
\r
工作经历\r
2020.7 -- 至今 北京航空航天大学 宇航学院 副教授\r
2016.10 -- 2020.6 北京航空航天大学 宇航学院 讲师\r
2015.9 -- 2016.9 Western University 机械工程学院 博士后\r
\r
2014.4 -- 2016.10 北京航空航天大学 宇航学院 博士后\r
社会兼职\r
北京力学会力学与工程结合委员会副主任\r
北京力学会第21届学术年会组织委员会委员\r
第三届京津冀力学会固体力学高级研讨会组织委员会委员\r
第17届北方七省市区力学学会学术会议分会场主席\r
《Composite Structures》特邀审稿人\r
《International Journal of Fatigue》特邀审稿人\r
《Results in Physics》特邀审稿人\r
《Progress in Natural Science Materials International》特邀审稿人\r
《Journal of Mechanical Science and Technology》特邀审稿人\r
《Computer Modeling in Engineering & Sciences》特邀审稿人等

研究领域

"飞行器结构设计\r
飞行器全机稳定性\\传热\\静力\\动强度分析\r
复合材料结构强度分析\r
航天器关键设备强度校核结构优化设计"

近期论文

刘丰睿,赵丽滨,刘海涛,龙丽平. 复合材料舱段连接构件三维应力分析及设计[C]//.China SAMPE' 2008国际学术研讨会论文集.,2008:394-397.,2022\r
\r
刘丰睿, 赵丽滨, 韩邦成, 房建成. 磁悬浮控制力矩陀螺框架结构的拓扑优化设计. 北京航空航天大学学报, 2010; 36: 455-458+499.\r
\r
刘丰睿,赵丽滨,韩邦成,房建成.磁悬浮控制力矩陀螺框架结构的拓扑优化设计[J].北京航空航天大学学报,2010,36(04):455-458+499.DOI:10.13700/j.bh.1001-5965.2010.04.007.,2022\r
\r
刘丰睿,赵丽滨. 一种表面法向移动的凹凸渐进法[C]//.北京力学会第17届学术年会论文集,2011:514-515.,2022\r
\r
周龙伟,刘丰睿,支杰,赵丽滨. 压载作用下复合材料孔板强度预测研究[C]//.力学与工程应用.,2012:67-69.,2022\r
\r
杨志龙,刘丰睿,赵丽滨. 考虑铺层和尺寸参数的复合材料螺栓连接结构优化[C]//.北京力学会第21届学术年会暨北京振动工程学会第22届学术年会论文集,2015:379-381.,2022\r
\r
张建宇, 刘丰睿, 山美娟, 赵丽滨. 复合材料多钉连接钉载矢量传感器. 复合材料学报, 2015; 32: 1420-1427..[期刊]\r
\r
张建宇,刘丰睿,山美娟,赵丽滨.复合材料多钉连接钉载矢量传感器[J].复合材料学报,2015,32(05):1420-1427.DOI:10.13801/j.cnki.fhclxb.20150515.002.,2022\r
\r
路绪恒,刘丰睿,赵丽滨. 基于fastener单元的复合材料螺栓连接钉载分配分析方法[C]//.北京力学会第21届学术年会暨北京振动工程学会第22届学术年会论文集,2015:373-374.,2022\r
\r
齐德轩,刘丰睿,张建宇. 湿热环境下复合材料强度数值模拟研究[C]//.北京力学会第21届学术年会暨北京振动工程学会第22届学术年会论文集,2015:375-376.,2022\r
\r
李杨,刘丰睿,赵丽滨. 几何尺寸对典型复合材料螺栓连接失效模式的影响研究[C]//.北京力学会第二十二届学术年会会议论文集,2016:230-231.,2022\r
\r
刘丰睿,赵丽滨,张建宇. 复合材料螺栓连接结构钉载分配研究[C]//.第十九届全国复合材料学术会议摘要集,2016:139-140.,2022\r
\r
赵丽滨,刘丰睿,黄伟,张建宇.复合材料螺栓连接失效分析研究进展[J].强度与环境,2017,44(03):1-11.DOI:10.19447/j.cnki.11-1773/v.2017.03.001.,2022\r
\r
陈奎儒,尚芃超,周龙伟,刘丰睿. 基于ADAMS的机舱装载时外平台与门槛滚棒高度差研究[C]//.北京力学会第二十三届学术年会会议论文集,2017:841-842.,2022\r
\r
张亚彬,刘丰睿,费斌军. 基于MSC.Patran的加筋板热力耦合载荷下尺寸影响研究[C]//.北京力学会第二十三届学术年会会议论文集,2017:369-370.,2022\r
\r
房子昂,黄伟,刘丰睿,赵丽滨. 基于钉载矢量传感器的螺栓连接钉载分配测试研究[C]//.北京力学会第二十三届学术年会会议论文集,2017:490-491.,2022\r
\r
刘丰睿,山美娟,赵丽滨,张建宇. 考虑拧紧力矩松弛的钉载分配概率分布特性研究[C]//.第三届中国国际复合材料科技大会摘要集-分会场31-35,2017:104.,2022\r
\r
房子昂,刘丰睿,赵丽滨. 复材多钉双剪结构试验误差对钉载分配的全局灵敏度分析[C]//.第三届中国国际复合材料科技大会摘要集-分会场31-35,2017:96.,2022\r
\r
刘丰睿,赵丽滨,张建宇. 一种复合材料螺栓连接的四折线刚度模型[C]//.2018年全国固体力学学术会议摘要集（上）,2018:53.,2022\r
\r
刘丰睿,赵丽滨,张建宇. 考虑间隙和拧紧力矩松弛的钉载分配概率分布分析方法[C]//.北京力学会第二十四届学术年会会议论文集,2018:226-228.,2022\r
\r
陈奎儒,姚婉婷,周龙伟,刘丰睿. 客机集装式货运系统动力驱动单元动力学仿真分析[C]//.北京力学会第二十四届学术年会会议论文集,2018:427-428.,2022\r
\r
陈奎儒,刘丰睿,赵丽滨. 基于ADAMS的客机集装式货运系统双向限动锁的人机功效仿真[C]//.第十七届北方七省市区力学学会学术会议论文集,2018:73-78.,2022\r
\r
房子昂,赵丽滨,刘丰睿,张建宇.碳纤维/树脂复合材料多钉连接钉载系数测试方法[J].复合材料学报,2019,36(12):2795-2804.DOI:10.13801/j.cnki.fhclxb.20190514.001.,2022\r
\r
刘丰睿,骈瑢,赵丽滨,张建宇.一种考虑过滤的短纤维增强复合材料RVE建模方法[J].北京航空航天大学学报,2019,45(02):277-282.DOI:10.13700/j.bh.1001-5965.2018.0295.,2022\r
\r
刘丰睿,房子昂,赵丽滨,张建宇. 一种高效的复合材料螺栓连接随机钉载分配分析方法[C]//.力学与工程——数值计算和数据分析2019学术会议论文集,2019:204-210.,2022\r
\r
骈瑢,刘丰睿,赵丽滨. 一种考虑过滤和排斥的短纤维复合材料RVE建模方法[C]//.北京力学会第二十五届学术年会会议论文集,2019:378-379.,2022\r
\r
刘丰睿, 骈瑢, 赵丽滨, 张建宇. 一种考虑过滤的短纤维复合材料RVE 建模方法. 北京航空航天大学学报, 2019; 45(2): 277-282.\r
\r
张武昆, 闫伟, 王会平, 赵丽滨, 刘丰睿. 不同环境下宽径比对碳纤维增强环氧树脂复合材料开孔层压板压缩失效的影响. 复合材料学报, 2020; 37(2): 267-275.\r
\r
李重华,刘丰睿,叶振信,赵丽滨.考虑横截面形状和几何尺寸的弹簧优化的两步式策略[J].西安交通大学学报,2020,54(11):74-80.,2022\r
\r
张武昆,闫伟,王会平,赵丽滨,刘丰睿.不同环境下宽径比对碳纤维增强环氧树脂复合材料开孔层压板压缩失效的影响[J].复合材料学报,2020,37(02):267-275.DOI:10.13801/j.cnki.fhclxb.20190419.001.,2022\r
\r
李重华, 刘丰睿, 叶振信, 赵丽滨. 考虑横截面形状和几何尺寸的弹簧优化的两步式策略. 西安交通大学学报, 2020; 54(11): 74-80.\r
\r
李重华,刘丰睿,赵丽滨. 弹簧的一种新的优化策略[C]//.北京力学会第26届学术年会论文集,2020:313-314.DOI:10.26914/c.cnkihy.2020.000449.,2022\r
\r
王鹤轩,刘丰睿,赵丽滨. 一种考虑载荷相互作用及固有属性损伤的累计损伤准则[C]//.第十八届北方七省市区力学学会学术会议论文集,2021:50-52.DOI:10.26914/c.cnkihy.2021.018926.,2022\r
\r
时新红,张敏,刘丰睿,吴成益. 材料力学实验教学体系的构建与实践[C]//.第十八届北方七省市区力学学会学术会议论文集,2021:249-250.DOI:10.26914/c.cnkihy.2021.019014.,2022\r
\r
董齐,时新红,刘丰睿,赵丽滨. 压-压循环载荷预制裂纹过程中裂纹尖端应力分布研究[C]//.北京力学会第二十七届学术年会论文集,2021:691-693.DOI:10.26914/c.cnkihy.2021.001770.,2022\r
\r
马晨曦,刘丰睿,赵丽滨. 复合材料舱段连接件应力分析及影响因素研究[C]//.北京力学会第26届学术年会论文集,2020:401-402.DOI:10.26914/c.cnkihy.2020.000473.,2022\r
\r
章琪,刘丰睿,王林娟,赵丽滨. 基于整体-局部分析方法的飞行器结构静强度分析[C]//.北京力学会第二十七届学术年会论文集,2021:730-732.DOI:10.26914/c.cnkihy.2021.001782.,2022\r
\r
马文渊,马晨曦,刘丰睿,赵丽滨. 飞行器气动热对主伞接头强度的影响[C]//.北京力学会第二十七届学术年会论文集,2021:708-709.DOI:10.26914/c.cnkihy.2021.001776.,2022\r
\r
林楠,刘丰睿,赵丽滨. 发射架力-环境耦合条件下疲劳分析方法研究[C]//.第十八届北方七省市区力学学会学术会议论文集,2021:47-49.DOI:10.26914/c.cnkihy.2021.018925.,2022\r
\r
Jianyu Zhang?, Fengrui Liu, Libin Zhao, Binjun Fei. A novel characteristic curve for failure prediction of multi-bolt composite joints. Composite Structures, 2013; 108: 129-136.\r
\r
Jianyu Zhang, Fengrui Liu, Libin Zhao, Yuli Chen, Binjun Fei. A progressive damage analysis based characteristic length method for multi-bolt composite joints. Composite Structures, 2014; 108: 915-923.\r
\r
Jianyu Zhang, Fengrui Liu, Libin Zhao, Meijuan Shan. Investigation on characteristic length testing methods for failure prediction of composite multi-bolt joints. Journal of Reinforced Plastics and Composites, 2015; 34: 636-648.\r
\r
Jianyu Zhang, Fengrui Liu, Libin Zhao, Jie Zhi, Longwei Zhou, Binjun Fei. Influence of end distances on the failure of composite bolted joints. Journal of Reinforced Plastics and Composites, 2015; 34: 388-404.\r
\r
Libin Zhao, An Xin, Fengrui Liu, Jianyu Zhang, Ning Hu. Secondary bending effects in progressively damaged single-lap, single-bolt composite joints. Results in Physics, 2016; 6: 704-711.\r
\r
Longwei Zhou, Donghua Zhang, Libin Zhao, Xiaohong Zhou, Jianyu Zhang, Fengrui Liu. Design and analysis of a novel bolted composite π joint under bending load. Materials and Design, 2016; 98: 201-208.\r
\r
Libin Zhao, Meijuan Shan, Fengrui Liu, Jianyu Zhang. A probabilistic model for strength analysis of composite double-lap single-bolt joints. Composite Structures, 2017; 161: 419-427.\r
\r
Yunfeng Dong, Xiaona Wei, Lu Tian, Fengrui Liu, Guangde Xu. A novel double cluster analysis and principal component analysis based optimization method for the orbit design of Earth observation satellites. International Journal of Aerospace Engineering, 2017; Article ID 6396032.\r
\r
Longwei Zhou, Libin Zhao, Fengrui Liu, Jianyu Zhang. A micromechanical model for longitudinal compressive failure in unidirectional fiber reinforced composite. Results in Physics, 2018; 10: 841-848.\r
\r
Meijuan Shan, Libin Zhao, Haiming Hong, Fengrui Liu, Jianyu Zhang. A progressive fatigue damage model for composite structures in hygrothermal environments. International Journal of Fatigue, 2018; 111: 299-307.\r
\r
Yunfeng Dong, Xiaona Wei, Fengrui Liu. Novel collaborative optimization framework using a negotiation model for satellite system design. Engineering Optimization, 2018; 50(8): 1395-1414.\r
\r
Meijuan Shan, Fengrui Liu, Ziang Fang, Libin Zhao, Jianyu Zhang. A bi-material property based FE modelling method for progressive damage analyses of composite double-lap bolted joints. Results in Physics, 2018; 11: 674-683.\r
\r
Tianliang Qin, Libin Zhao, Jifeng Xu, Fengrui Liu, Jianyu Zhang. Model of CEL for 3D elements in PDMs of unidirectional composite structures. Computer Modeling in Engineering & Sciences, 2019; 118 (1): 157-176.\r
\r
Xinhong Shi, Yana Wang, Ruodi Jia, Fengrui Liu, Jianyu Zhang. Experimental investigations on microstructures and mechanical properties of white yak horns sheath. Results in Physics, 2019; 13: 102174.\r
\r
Libin Zhao, Kangkang Wang, Fan Ding, Tianliang Qin, Jifeng Xu, Fengrui Liu, Jianyu Zhang. A post-buckling compressive failure analysis framework for composite stiffened panels considering intra-, inter-laminar damage and stiffener debonding. Results in Physics, 2019; 13: 102205.\r
\r
Yana Wang, Ruodi Jia, Fengrui Liu. A ply-by-ply discretized 2D FEA approach with the integrated XFEM-CE strategy for predicting multiple failures in laminated composite structures. CMES-Computer Modeling in Engineering & Sciences, 2019; 120(1): 215-234.\r
\r
Kangkang Wang, Fengrui Liu, Haiming Hong. Shear failure mechanisms and influences of overlaminate configuration on the failure of composite π joints. Results in Physics, 2019; 12: 934-942.\r
\r
Meijuan Shana, Libin Zhao, Fengrui Liu, Dexuan Qi, Jianyu Zhang. Revealing the competitive fatigue failure behaviour of CFRP-aluminum twobolt, double-lap joints. Composite Structures, 2020; 244: 112166.\r
\r
Ruixue Ji, Libin Zhao, Kangkang Wang, Fengrui Liu, Yu Gong, Jianyu Zhang. Effects of debonding defects on the postbuckling and failure behaviors of composite stiffened panel under uniaxial ompression. Composite Structures, 2021; 256: 113121.\r
\r
W.M. Mahdy, Libin Zhao, Fengrui Liu, Rong Pian, Huiping Wang, Jianyu Zhang. Buckling and stress-competitive failure analyses of composite laminated cylindrical shell under axial compression and torsional loads. Composite Structures, 2021; 255: 112977.\r
\r
Fengrui Liu, Libin Zhao, Saqib Mehmood, Jianyu Zhang, Binjun Fei. A modified failure envelope method for failure prediction of multi-bolt composite joints. Composites Science and Technology, 2013; 83: 54-63.\r
\r
Fengrui Liu, Jianyu Zhang, Libin Zhao, An Xin, Longwei Zhou. An analytical joint stiffness model for load transfer analysis in highly torqued multi-bolt composite joints with clearances. Composite Structures, 2015; 131: 625-636.\r
\r
Fengrui Liu, Xuheng Lu, Libin Zhao, Jianyu Zhang, Jifeng Xu, Ning Hu. Investigation of bolt load redistribution and its effect on failure prediction in double-lap, multi-bolt composite joints. Composite Structures, 2018; 202: 397-405.\r
\r
Fengrui Liu, Meijuan Shan, Libin Zhao, Jianyu Zhang. Probabilistic bolt load distribution analysis of composite single-lap multi-bolt joints considering random bolt-hole clearances and tightening torques. Composite Structures, 2018; 194: 12-20.\r
\r
Fengrui Liu, Xuheng Lu, Libin Zhao, Jianyu Zhang, Ning Hu, Jifeng Xu. An interpretation of the load distributions in highly torqued single-lap composite bolted joints with bolt-hole clearances. Composites Part B, 2018; 138: 194-205.\r
\r
Libin Zhao, Ziang Fang, Fengrui Liu, Meijuan Shan, Jianyu Zhang. A modified stiffness method considering effects of hole tensile deformation on bolt load distribution in multi-bolt composite joints. Composites Part B, 2019; 171: 264-271.\r
\r
Fengrui Liu, Ziang Fang, Libin Zhao, Jianyu Zhang, Ning Hu. A failure-envelope-based method for the probabilistic failure prediction of composite multi-bolt double-lap joints. Composites Part B, 2019; 172: 593-602.\r
\r
Fengrui Liu, Wanting Yao, Xinhong Shi, Libin Zhao, Jianyu Zhang. Bearing failure optimization of composite double-lap bolted joints based on a three-step strategy marked by feasible region reduction and model decoupling. Computers, Materials & Continua, 2020; 62 (2): 977-999.\r
\r
Fengrui Liu, Wanting Yao, Libin Zhao, Hao Wud, Xi Zhang, Jianyu Zhang. An improved 2D finite element model for bolt load distribution analysis of composite multi-bolt single-lap joints. Composite Structures, 2020; 253: 112770.