1. Preparation of polydimethylsiloxane-coated α-alumina fillers with cold plasma for elastomer thermal interface materials. Journal of Applied Polymer Science. 2012; 123: 2875-2882.2. Study on ablative properties and mechanisms of hydrogenated nitrile butadiene rubber (HNBR) composites containing different fillers. Polymer Degradation and Stability 2011, 96(5), 808-817.3. Microstructure and properties of highly filled rubber/clay nanocomposites prepared by melt blending. Composite Science and Technology 2007, 67(14): 2903-2913.4. Effects of Heat and Pressure on Microstructures of Isobutylene-Isoprene Rubber (IIR)/Clay Nanocomposites. Macromolecular Materials and Engineering. 2006; 291: 27-36.5. Chapter 24. Physical properties of rubber-based nanocomposites in the Book on Polymer Nanocomposites: Physical Properties of Polymer Nanocomposites, 787-831. Woodhead Publishing Limited, Cambridge UK 2010.6. Chapter 6. Processing Methods for the Preparation of Rubber–Clay Nanocomposites in the Book on Rubber-Clay Nanocomposites: Science, Technology, and Application, 147-179. John Wiley & Sons, Inc., New York USA 2011.7. Chapter 3. Morphology and Interface Development in Rubber–Clay Nanocomposites in the Book on Optimization of Polymer Nanocomposite Properties, 41-66. Wiley-VCH, KGaA, Weinheim 2010.8. Chapter 16. Preparing rubber based nanocomposites through compounding and vulcanization in the Book on Advances in polymer processing: From macro- to nano- scales, 479-551. Woodhead Publishing Limited, Cambridge UK 2009.9. Infrared study on in situ polymerization of zinc dimethacrylate in poly(alpha-octylene-co-ethylene) elastomer. Polymer International. 2004, 53: 802-808.10. Influence of thermal processing on the perfection of crystals in polyamide 66 and polyamide 66/clay nanocomposites. Polymer. 2004; 45: 8999-9009.
