个人简历

简历
教育背景：
1994.09-1998.07南昌航空大学宇航与制造学院学士学位
1998.09-2001.03 南昌航空大学宇航与制造学院硕士学位
2001.03-2004.05 西北工业大学材料学院博士学位
工作经历：
2004.05-2006.03 北京科技大学材料学院博士后
2006.04-至今 北京科技大学工程技术研究院(原冶金工程研究院)，历任助理研究员、副研究员、研究员；博士生导师；先进材料所所长

研究领域

低合金结构钢及特殊钢开发
镁、钛、铝有色金属材料开发
轧制、锻造、焊接、热处理加工工艺
材料组织与性能控制"专利
1. 江海涛，卢淋，唐荻，米振莉，李志超，段晓鸽，吴彦欣. 一种1000MPa级高铝热镀锌双相钢及其制备方法

近期论文

著作论文
1. Tian S, Jiang H, Guo W, et al. Hot deformation and dynamic recrystallization behavior of TiAl-based alloy[J]. Intermetallics, 2019, 112: 106521. SCI
2. Guo W, Jiang H, Wang S, et al. Self-sharpening ability enhanced by torque gradient in twisted tungsten-fiber-reinforced Cu-Zn matrix composite[J]. Journal of Alloys and Compounds, 2019, 794: 396-401. SCI
3. Wang J, Mi Z, Jiang H, et al. Texture-governed electrochemical corrosion behaviour of AA 6082 alloy[J]. Journal of Materials Science, 2019, 54(8): 6608-6623. SCI
4. Kang Q, Jiang H, Kuai Z, et al. Optimization of the hot compression constitutive equation and processing map of Mg-4Zn-0.8 Ca (wt.%) alloy[J]. Materials Research Express, 2019. SCI
5. Xu M, Li H, Jiang R, et al. Deformation behavior and microstructural evolution in ultra-high-strength dual-phase (UHS-DP1000) steel with different strain rates[J]. Journal of Iron and Steel Research International, 2019, 26(2): 173-181. SCI
6. Zhang Y, Jiang H, Wang Y, et al. Effects of alloying addition and twin-roll casting process on Mg-2Zn based-alloys with high strength and high formability[J]. Materials Research Express, 2019. SCI
7. Wang J Y, Jiang H T, Duan X G, et al. Orientation and microstructure topology-governed crack propagation behavior in AA7021 aluminum alloys during uniaxial tension[J]. Materials Science and Engineering: A, 2019, 739: 254-263. SCI
8. Duan X, Mi Z, Jiang H, et al. Rapid bake-hardening response of Al-Mg-Si alloy during two-stage pre-aging heat treatment[J]. Materials Research Express, 2019. SCI
9. Haitao Jiang, Guihua Zhang, Wenqi Guo. Deformation Behavior of Ti2AlNb-Based Alloy during Dynamic Compression[J]. Advanced Engineering Materials, 2018: 1800281.SCI
10. Qiang Kang, Haitao Jiang, Yun Zhang, Zhe Xu. Effect of various Ca content on microstructure and fracture toughness of extruded Mg-2Zn alloys. Journal of Alloys and Compounds, 2018, 742: 1019-1030. SCI
11. Haitao Jiang, Shiwei Tian, Wenqi Guo, Guihua Zhang. Hot deformation behavior and deformation mechanism of two TiAl-Mo alloys during hot compression. Materials Science & Engineering A, 2018, 719: 104-111. SCI
12. Kang, Qiang, Jiang, Haitao, Zhang, Yun. Microstructure, mechanical properties and stretch formability of Mg-3Al-0.5Ca-0.2Gd alloy processed at various finish rolling temperatures, MATERIALS RESEARCH EXPRESS, 2018,5(4). SCI
13. Zeng, Shangwu, Zhao, Aimin, Jiang, Haitao. Evolution of Surface Morphology of Oxide Formed During Initial-Stage Oxidation of gamma-TiAl Alloy Using In Situ Environmental SEM. OXIDATION OF METALS, 2018, 90(5-6):649-655. SCI
14. Guo, Wenqi, Jiang, Haitao, Tian, Shiwei), Zhang, Guihua. Nanoscale Twinned Ti-44Al-4Nb- 1.5Mo-0.007Y Alloy Promoted by High Temperature Compression with High Strain Rate. METALS, 2018, 8(8):619. SCI
15. Yang, Yonggang, Mi, Zhenli, Liu, Siyang, Li, Hui, Li, Jun, Jiang, Haitao. The Impact of Strain Heterogeneity and Transformation of Metastable Austenite on Springback Behavior in Quenching and Partitioning Steel. METALS, 2018, 8(6):432. SCI
16. Xu, Mei, Mi, Zhenli, Li, Hui, Tang, Di, Jiang, Haitao. Deformation mechanism transition in Fe-17Mn-0.4C-0.06V TWIP steel with different strain rates. MATERIALS SCIENCE AND TECHNOLOGY, 2018, 34(2):242-251. SCI
17. Haitao Jiang, Yun Zhang, Qiang Kang. The influence of Ca and Gd microalloying on microstructure and mechanical property of hot-rolled Mg-3Al alloy[J]. Procedia Engineering, 2017, 207: 932-937. SCI
18. 江海涛, 吴波, 张韵等. 高应变速率下钛-钢复合板界面组织特征及变形机制[J]. 北京科技大学学报, 2017, 39(7):1070-1076. EI
19. 江海涛, 刘鹏, 康强 等. 钙元素含量对Mg-2Al-xCa-0.2Gd镁合金织构演变和性能的影响[J]. 稀有金属材料与工程, 2017(12):3897-3902. SCI
20. Haitao Jiang, Shangwu Zeng, Shiwei Tian, et al. Microstructural Evolution and Dynamic Recrystallization Behavior of β–γ TiAl based Alloy during Hot Compression[J]. Advanced Engineering Materials, 2017, 19. SCI
21. 杨永刚，米振莉，江海涛，李辉. 析出强化与孪晶强化在Fe-24Mn-3Si-3AlTWIP钢退火过程中的作用机制. 工程科学学报, 2017, 39(6): 854-858. EI
22. Zhichao Li, Ning Dang, Haitao Jiang, Zhenhai Xia. Influence of Temperature on the Texture Distribution in Two-Phase Region Hot Deformation of Grain-Oriented Silicon Steel. Journal of Materials Engineering and Performance. 2017, 26(11): 5439-5445. SCI
23. Zhichao Li, Ning Dang, Haitao Jiang, Zhenhai Xia. Mechanism of Texture and Precipitates Evolution in CGO Silicon Steel During High-Temperature Annealing Process. Journal of Materials Engineering and Performance. 2017, 26(11): 5432-5438. SCI
24. Zeng, Shangwu, Zhao, Aimin,Luo, Luo, Lin,Jiang, Haitao, Zhang, Lei. Development of beta-solidifying gamma-TiAl alloys sheet. MATERIALS LETTERS. 2017, 198:31-33. SCI
25. 吝章国，陈家泳，唐荻，江海涛. 基于层错能的中锰Q&P钢变形机制研究. 华南理工大学学报. 2016, 44(2): 140-146.EI
26. Haitao Jiang, Peng Dong, Shangwu Zeng, et al. Effects of Recrystallization on Microstructure and Texture Evolution of Cold-Rolled Ti-6Al-4V Alloy[J]. Journal of Materials Engineering & Performance, 2016, 25(5):1931-1938.
27. 江海涛, 徐惠惠. Q345-TA2的动态流动应力特征和本构关系[J]. 稀有金属材料与工程, 2016(12):160-164.SCI•
28. Haitao Jiang, Shangwu Zeng, Aimin Zhao, et al. Hot deformation behavior of β phase containing γ-TiAl alloy[J]. Materials Science and Engineering: A, 2016, 661: 160-167.SCI
29. Peng Liu, Haitao Jiang, et al. The effect of Y, Ce and Gd on texture, recrystallization and mechanical property of Mg–Zn alloys[J]. Journal of Magnesium and Alloys, 2016, 4(3): 188-196.SCI
30. Haitao Jiang, Qiang Kang, Xiaoqian Yan. A novel diffusion model considering curvature radius at the bonding interface in a titanium/steel explosive clad plate. International Journal of Minerals, Metallurgy and Materials, 2015, 22(9):956-965. SCI
31. 江海涛, 阎晓倩, 刘继雄, 曾尚武, 段晓鸽. 钛-钢爆炸复合热处理过程中的扩散行为及数学模型. 稀有金属材料与工程, 2015, 44(4):972-976. SCI
32. 江海涛, 马昭, 蔡正旭, 舒滢, 康强. 变形Mg-1.5Zn-xCe合金织构及室温成形性能的研究. 工程科学学报, 2015, 37(2):204-210. EI
33. 米振莉, 潘殿军, 江海涛. 700 MPa 冷轧低合金超高强钢的典型连续退火工艺. 工程科学学报, 2015, 37(2):185-189. EI
34. 曾尚武, 江海涛, 赵爱民. TC4钛合金高温氧化行为[J]. 稀有金属材料与工程, 2015, 44(11):2812-2816.SCI
35. 卢淋, 唐荻, 江海涛. 高铝1000MPa级热镀锌双相钢的组织和性能. 材料热处理学报, 2015, 36(4):116-120. EI
36. 刘继雄, 杨奇, 郭志军, 王鼎春, 高颀, 江海涛. 热等静压处理ZTC4钛合金低温热处理过程中组织演变. 材料热处理学报, 2015, 36(增刊I):32-36. EI
37. 江海涛, 段晓鸽, 蔡正旭, 王丹. 异步轧制AZ31镁合金板材的超塑性工艺及变形机制. 材料工程, 2015, 43(8):7-12. EI
38. Shangwu Zeng, Aimin Zhao, Haitao Jiang. Oxidation of conventional and nanostructured 8wt.%yttria-stabilized zirconia coating surface coatings on γ-TiAl. Applied Surface Science, 2015, 332(30):362-367. SCI
39. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan. Effect of Heat Treatment on the Microstructure and Mechanical Property of Ti-steel explosive-rolling clad plate. Transactions of Nonferrous Metals Society of China, 2014, 24(3):697-704. SCI
40. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan, Shangwu Zeng. Microstructure and Mechanical Properties of HIP-ZTC4 during Thermal Exposure and Tensile Deformation, Rare Metals, 2014, 1-6. SCI
41. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan, Shangwu Zeng. Influence of Asymmetric Rolling Parameters on the Microstructure and Mechanical Properties of Titanium Explosive Clad Plate, RARE METAL MAT ENG, 2014, 43(11):2631-2636. SCI
42. Shangwu Zeng, Aimin Zhao, Haitao Jiang, Xiang Fan, Xiaoge Duan, Xiao-qian Yan. Cyclic oxidation behavior of the Ti-6Al-4V alloy. Oxidation of Metals, 2014, 81(3-4):467-476. SCI
43. Shangwu Zeng, Aimin Zhao, Haitao Jiang, Xiaoqian Yan, Jixiong Liu, XiaogeDuan. High temperature deformation behavior of Titanium clad steel plate. Rare Metals, 2014, 1-6. SCI
44. 李辉, 米振莉, 武会宾, 江海涛, 唐荻, 王一德. GCr15 轴承钢热处理中纳米级碳化物的析出. 材料热处理学报, 2014, S1:34-38. EI
45. 吴彦欣, 米振莉, 江海涛, 唐荻, 吴海鹏, 薛瑶. TWIP 钢的低周疲劳断裂机制. 材料热处理学报, 2014, 9:028. EI
46. 蔡正旭, 唐荻, 江海涛, 马昭. 变形Mg-1.5Zn-0.2Gd合金退火过程中组织与织构演变过程研究. 材料工程, 2014, 7:44-49. EI
47. 李烁, 王一德, 武会宾, 江海涛. 超低碳低活化铁素体/马氏体钢的组织与性能. 材料热处理学报, 2014, 9: 018. EI
48. Haitao Jiang, Xiaoqian Yan, Jixiong Liu, Xiaoge Duan. Effect of heat treatment on microstructure and mechanical property of Ti–steel explosive-rolling clad plate. Transactions of Nonferrous Metals Society of China, 2014, 24(3): 697-704. SCI
49. 刘鹏, 江海涛, 段晓鸽, 康强. 稀土元素Y和Ce对热轧Mg-1.5Zn镁合金组织和室温成形性能的影响. 材料工程, 2014, 12: 1-10. EI