个人简历

教育经历：
1988.09-1992.06 北京科技大学机械工程系、冶金机械专业，获学士学位
1994.09-2000.03 北京科技大学机械工程学院、机械设计及理论专业，获博士学位

工作经历:
1992.07-1994.08 湖南工业大学（国家研究生培养改革保留学籍工作），教师
2000.04-2004.06 北京科技大学机械工程学院，讲师
2004.07-2010.06 北京科技大学机械工程学院，副教授、副系主任和博士生导师（2010）
2014.08-2015.02 美国加州大学-圣地亚哥UCSD，高级访问学者
2010.07-至今 北京科技大学机械工程学院，教授、副系主任和博士生导师
2016.10-至今 北京科技大学机械工程学院，院长助理

研究领域

基于工业大数据的智能制造建模与全流程板形控制、轧制技术及自动化，精确塑性成形制造及其自动化，机器人仿生电子皮肤触觉传感与多模态感知，复杂机电系统检测与控制

近期论文

代表性论著:
1、Cao J G*, Chai X T, Li Y L, Kong N, Jia S H, Zeng W. Integrated design of roll contours for strip edge drop and crown control in tandem cold rolling mills. Journal of Materials Processing Technology, 2018,252(2):432-439
2、Li Y L, Cao J G*, Qiu L, Yang G H, He A R and Zhou Y Z. Research on ASR work roll contour suitable for all width electrical steel in hot rolling. International Journal of Advanced Manufacturing Technology,2018,95(5):1–6.
3、刘晓立,曹建国*,柴雪婷,刘江,程姣姣,赵荣国.基于变弹性模量对DP980高强钢辊弯成型回弹预测精度的研究, 哈尔滨工业大学学报, 2018,50(7):137-143
4、曹建国*,周建辉,缪存孝,尹海斌,李维奇,夏飞.电子皮肤触觉传感器研究进展与发展趋势,哈尔滨工业大学学报,2017,49(1):1-13
5、Yin H B, Zhang X T, Li J F and Cao J G. Grasping Model and Experiment of a Soft Robot Gripper with Variable Stiffness. 8th IEEE International Conference on Cybernetics and Intelligent Systems (CIS) and the 8th IEEE International Conference on Robotics, Automation and Mechatronics (RAM), 19 to 21 November 2017,Ningbo.
6、曹建国*,宋红攀,刘鑫贵,吴毅,江军,项彬.基于ANSYS/FE-SAFE的高速动车组车轴疲劳寿命分析,中国铁道科学,2017,38(1):111-116
7、曹建国.薄板坯连铸连轧工艺与设备.北京:化学工业出版社,2017.1
8、Zhao C,Wang M,Shi Y,Cao J G and Qiao Y.High-temperature post-processing treatment of silica nanofoams of controlled pore sizes and porosities, Materials & Design,2016,90(1):815-819
9、曹建国*,王天聪,李洪波, QIAO Yu,温盾,周云松.基于Arrhenius改进模型的无取向电工钢高温变形本构关系,机械工程学报,2016,52(4):90-96,102
10、曹建国*,唐慧,杨光辉,温盾,周云松,赖金权.有高温相变的电工钢热轧起浪的有限元分析, 哈尔滨工业大学学报,2016,48(1):146-151
11、Dong Q,Cao J G* and Wen D.Spalling Prevention and Wear Improvement of rolls in steel strip hot-rolling process.Journal of Failure Analysis and Prevention,2015,15(5):626-632
12、Li Y L, Cao J G*,Yang G H,Wen D,Zhou Y Z and Ma H H.ASR bending force mathematical model for the same width strip rolling campaigns in hot rolling. Steel Research International. 2015,86(5):567-575
13、Sun Y H,Zhou D B,Bai J,Wang H P and Cao J G. Design and evaluation of a highly stretchable and conductive thin film for tactile sensors.2015 TechConnect World Innovation Conference and Expo, National Harbor, Maryland, U.S.A., June 14-17, 2015.
14、Dong Q, Cao J G*, Li H B, Zhou Y S, Yan T L and Wang W Z. Analysis of spalling in roughing mill backup rolls of wide and thin strip hot rolling process. Steel Research International.2015,86(2):129-136
15、Dong Q and Cao J G*.Contact deformation analysis of elastic–plastic asperity on rough roll surface in a strip steel mill, Journal of Failure Analysis and Prevention,2015,15(2):320-326
16、曹建国*,廖然,杨利花.燃料电池电动汽车发展现状与前景.新材料产业,2015,(4):58-63
17、Zhou D B, Wang H P, Bai J and Cao J G. Effects of oxygen plasma treatment and e-beam evaporation on AgNWs/PDMS based stretchable electrode. Smart Materials and Structures,2014,23(10): 104001.1-7
18、Kong N,Cao J G*,Wang Y P,Tieu A K,Yang L H,Hou A Q and Wang Z B. Development of smart contact backup rolls in ultra-wide stainless strip rolling process. Materials and Manufacturing Processes,2014.2,29(2):129-133
19、Wang H P,Zhou D B and Cao J G*. Development of a skin-like tactile sensor array for curved surface.IEEE Sensors Journal,2014,14(1):55-61
20、Wang H P,Zhou D B and Cao J G*. Development of a stretchable conductor array with embedded metal nanowires.IEEE Transactions on Nanotechnology,2013,12(4):561-565
21、Cao J G*,Liu S J,Zhang J,Song P,Yan T L and Zhou Y Z.ASR work roll shifting strategy for schedule-free rolling in hot wide strip mills, Journal of Materials Processing Technology, 2011,211(11):1768-1775
22、Cao J G*,Xu X Z,Zhang J,Song M Q,Gong G L and Zeng W. Preset model of bending force for 6-high reversing cold rolling mill based on genetic algorithm, Journal of Central South University: Science &Technology of Mining an Metallurgy,2011,18(5):1487-1492
23、曹建国*，覃业均，张杰，宋木清，宫贵良，彭强.基于Fluent非稳态模型工作辊精细冷却参数研究.中南大学学报(自然科学版)，2011,42(6): 1402-1405
24、曹建国*，张勇，杨光辉，孟小明，曹立潮，周学会，王正凯.UCM六辊冷轧机中间辊辊形研究. 中南大学学报(自然科学版), 2011，42(4)：966-971.
25、曹建国*，孟小明，杨光辉，张勇，曹立潮，刘波.基于遗传算法的UCM双机架冷轧机弯辊力设定模型. 天津大学学报, 2011，44(7)：650-654.
26、曹建国*，王燕萍，孔宁，杨连宏，侯安全，王泽斌. 不锈钢热连轧机粗轧支持辊剥落影响因素的有限元分析. 工程力学，2011，28(4)：194-199.
27、Cao J G*,Zhang J, Yang G H, Yin X Q, Zeng W and Gong G L. Comprehensive edge drop control technology of non-oriented electrical steel strip in 4-high ECC tandem cold rolling mills.The Proceedings of the 10th International Conference on Steel Rolling，Beijing, China, September 15-18,2010:1065-1073.
28、Cao J G*,Zhang J,Kong N and Mi K F(2010). Finite Element Analysis of Strip and Rolling Mills, Finite Element Analysis, David Moratal (Ed.), ISBN: 978-953-307-123-7, SCIYO, Available from: http://www.intechopen.com/articles/show/title/-finite-element-analysis-of-strip-and-rolling-mills.
29、曹建国*，张杰，张少军.轧钢设备及自动控制.北京：化学工业出版社，2010.6
国家科技奖励、国家重点研发计划、国家自然科学基金、博士后基金和奖励等通讯评审/会评专家、《中国测试》和《塑性工程学报》编委、《精密成形工程》通讯编委、中国自动化学会制造技术专业委员会委员、京津冀智能制造联盟常务理事、国际塑性成形“奥林匹克”第12届ICTP(英国剑桥大学ICTP2017)和第17届ICMF(日本丰桥技术科学大学Metal Forming 2018)国际科技委委员、Universiti Sains Malaysia 等海外知名高校提职External Assessor