安柏涛
近期热点
资料介绍
个人简历
招生方向燃气透平传热与冷却教育背景 2002-12--2004-12 中国科学院工程热物理研究所 博士后1998-09--2002-10 哈尔滨工业大学 博士学位1996-09--1998-07 哈尔滨工业大学 硕士学位1988-09--1992-07 哈尔滨工业大学 学士学位工作简历2005-01~现在, 中国科学院工程热物理研究所, 副研究员2002-12~2004-12,中国科学院工程热物理研究所, 博士后1998-09~2002-10,哈尔滨工业大学, 博士学位1996-09~1998-07,哈尔滨工业大学, 硕士学位1992-08~1996-09,哈尔滨汽轮机有限责任公司, 技术员1988-09~1992-07,哈尔滨工业大学, 学士学位专利成果( 1 ) 一种提高离散孔气膜冷却效率的结构形式, 2010, 第 1 作者, 专利号: 201010106756.6( 2 ) 新型强化换热装置, 2008, 第 3 作者, 专利号: ZL 2007 2 0173222.9( 3 ) 一种离散气膜冷却孔型, 2012, 第 1 作者, 专利号: 201210027373.9( 4 ) 一种离散气膜冷却孔结构, 2017, 第 1 作者, 专利号: 201610931944.X( 5 ) 一种离散气膜冷却孔结构, 2017, 第 1 作者, 专利号: 201610931996.7科研项目( 1 ) 燃气透平流热固耦合机理研究, 参与, 国家级, 2007-08--2011-09( 2 ) 燃气轮机高温透平叶片研制与验证, 参与, 部委级, 2014-12--2016-12( 3 ) 异型截面气膜孔的流动与传热机理实验研究, 主持, 国家级, 2018-01--2021-12( 4 ) 天然气燃料燃气轮机 热端部件高温实验系统, 参与, 部委级, 2016-01--2016-12( 5 ) 300MW级F级燃机气膜、冲击冷却单元和密封单元试验项目, 参与, 院级, 2018-09--2019-04( 6 ) 长寿命透平叶片气热耦合设计理论与方法研究, 参与, 国家级, 2018-08--2023-07参与会议(1)Numerical Investigation of the Effect of Inlet Flow Angle on Film Cooling Performance for the Blade Tip with Suction Surface Squealer Rim 2019-06-08(2)Numerical investigation of the film cooling effectiveness on the suction squealer tip with different film-hole arrangements 2018-10-18(3)Numerical investigation of the film cooling effectiveness on the suction squealer tip with different film-hole arrangements 2018-10-18(4)A TWO-DIMENSIONAL ANALYTICAL METHOD FOR TURBINE BLADE COOLING DESIGN 2017-06-13(5)Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage An Bai-Tao, Liu Jian-Jun, Jiang Hong-De 2008-06-09(6)Three-Dimensional Flow Analysis and Design Improvement of Leading-Edge Film-Cooling in An Inlet Guide Vane An Bai-Tao, Liu Jian-Jun, Jiang Hong-De 2006-05-08研究领域
""近期论文
(1) Numerical investigation on film cooling characteristics of slot-sectional diffusion holes combined with an internal cross-flow channel, Applied Thermal Engineering, 2020, 通讯作者(2) Numerical Investigation on Film Cooling Characteristics of Slot-Sectional Diffusion Holes Combined with an Internal Cross-Flow Channel , Applied Thermal Engineering, 2020, 通讯作者(3) EXPERIMENTAL INVESTIGATION OF THE FILM COOLING PERFORMANCE ON THE BLADE ENDWALL WITH DIFFUSION SLOT HOLES AND STATOR-ROTOR PURGE FLOW, ASME Paper, 2020, 第 4 作者(4) 垂直横流通道内槽型截面孔气膜冷却特性数值研究, 推进技术, 2020, 通讯作者(5) Effects of Mainstream Turbulence Intensity and Coolant-to-Mainstream Density Ratio on Film Cooling Effectiveness of Multirow Diffusion Slot Holes, ASME Journal of Heat Transfer, 2019, 第 1 作者(6) The Investigations of Slot Film Outflow used on the Laminated Cooling Configuration, International Journal of Heat and Mass Transfer, 2019, 第 3 作者(7) Numerical Investigation of the Effect of Inlet Flow Angle on Film Cooling Performance for the Blade Tip with Suction Surface Squealer Rim, ASME Paper, 2019, 第 4 作者(8) Effects of Inclination Angle, Orientation Angle and Hole Length on Film-Cooling Effectiveness of Rectangular Diffusion Holes, ASME J. Turbomachinery, 2018, 第 1 作者(9) NUMERICAL INVESTIGATION ON FILM COOLING PERFORMANCE OF FUSIFORM DIFFUSION HOLES, ASME J. Heat Transfer, 2018, 第 1 作者(10) 燃气轮机透平叶片流-热-固耦合分析及蠕变寿命预测, 燃气轮机技术, 2018, 第 4 作者(11) Numerical investigation of the film cooling effectiveness on the suction surface squealer tip with different film-hole arrangements, ACGT, 2018, 第 3 作者(12) A TWO-DIMENSIONAL ANALYTICAL METHOD FOR TURBINE BLADE COOLING DESIGN, ASME Paper,GT2017-63856, 2017, 第 3 作者(13) Geometrical Parameter Effects on Film Cooling Effectiveness of Rectangular Diffusion Holes, ASME Journal of Turbomachinery, 2017, 第 1 作者(14) Numerical Investigation on Diffusion Slot Hole with Various Cross-Sectional End Shapes, ASME Journal of Heat Transfer, 2017, 第 1 作者(15) Film Cooling Effectiveness Measurements of a Near Surface Streamwise Diffusion Hole, International Journal of Heat and Mass Transfer, 2016, 第 1 作者(16) Film Cooling of Cylindrical Hole With a Downstream Short Crescent-Shaped Block, ASME Journal of Heat Transfer, 2013, 第 1 作者(17) Leading Edge Film Cooling Enhancement for an Inlet Guide Vane with Fan-Shaped Holes, Journal of Thermal Science, 2010, 第 2 作者(18) Numerical Investigation on Unsteady Effects of Hot Streak on Flow and Heat Transfer in a Turbine Stage, ASME Journal of Turbomachinery, 2009, 第 1 作者(19) Simulation of 3D Flow in Turbine Blade Rows including the Effects of Coolant Ejection, Journal of Thermal Science, 2008, 第 2 作者 相关热点
最新收录
- 水咲优美(水咲優美) 06-25
- 三月光(三月ひかる) 06-21
- 澪川遥(澪川はるか) 06-21
- 冈本莉里 岡本莉里 (おか 06-21
- 宗像丽奈(宗像れな) 06-21
- 温碧霞 06-21
- 舒淇 06-21
- 叶玉卿 06-21
- 叶子楣 06-21
- 杨思敏 06-21