个人简历

教育背景\r
2000，韩国国立釜山大学，博士学位\r
1996，清华大学机械工程系，工学硕士\r
1991，清华大学机械工程系，工学学士\r
\r
工作履历\r
2004- 清华大学机械工程系，副研究员\r
2003-2004 清华大学机械工程系，助研\r
2001-2003 清华大学机械工程系，博士后(合作导师曾攀教授)\r
2000-2001 Pusan National University, Korea, 博士后\r
1996-1997 昆明理工大学机械系，助教\r
1991-1993 四川攀枝花钢铁公司，助工

研究领域

材料成形中的数值模拟\r
\r
塑性成形及宏域微成形原理\r
\r
复杂结构的高精度建模方法及设计\r
\r
超轻结构设计及装备""

近期论文

曾攀, 雷丽萍, 方刚. 结构的建模与分析. 机械工业出版社, 2011\r
\r
曾攀, 石伟, 雷丽萍. 工程有限元方法. 科学出版社, 2010\r
\r
Zeng P, Fang G, Lei L P. Technical Regulation for Numerical Simulation on Processing Technology of Large Forgings. ICMEM 2013. Applied Mechanics and Materials. 302, 2013, 595-598\r
\r
李源，雷丽萍，曾攀. 基于静力等效的喷丸工艺数值模拟. 塑性工程学报，2011, 18(3):70-74\r
\r
李聪聪, 曾攀, 雷丽萍, 宋江腾. 基于销-盘材料互换试验的钴基合金摩擦磨损特性研究. 润滑与密封. 2011, 36(8): 15-19\r
\r
Cai F, Lei L P, Zeng P, Lu Y J. Study of the relationship between powder density and microhardness of BSCCO-2212 by experiment and FEM. Proc. 10th Int. Conf. Techn. Plast.(ICTP 2011), 1022-1025\r
\r
Mei L, Zeng P, Lei L P. Prediction and application of welding residual deformation of steel sheets. Adv. Mater. Res. 2011, 189-193: 3470-3473, Ei: 20111113749726\r
\r
李聪聪, 曾攀, 雷丽萍, 宋江腾.钴基合金的滑动磨损行为及仿真预测. 机械工程学报. 2011, 47(21): 97-103(EI: 20115014602839)\r
\r
李源, 雷丽萍, 曾攀. 弹丸束喷丸有限元模型数值模拟及试验研究. 机械工程学报. 2011, 47(22): 43-49(EI: 20115014602858)\r
\r
Zhao J Q, Zeng P, Lei L P, Ma Y. Initial guess by improved population-based intelligent algorithms for large inter-frame deformation measurement using digital image correlation. Optics and Lasers in Engineering. 2012, 50:473-490 (Ei: 20110513630546, SCI: 892ED)\r
\r
Zhao J Q, Zeng P, Pan B, Lei L P, Du H F, He W B, Liu Y, Xu Y J. Improved Hermite finite element smoothing method for full-field strain measurement over arbitrary region of interest in digital image correlation. Optics and Lasers in Engineering. 2012, 50:1662-1671(SCI: 990HF, Ei: 20123115291480)\r
\r
刘福超， 雷丽萍，曾攀. 滚压有限元模型数值模拟. 塑性工程学报， 2012, 19(2): 17-21\r
\r
李婉宜, 曾攀, 雷丽萍, 林大超. 离散颗粒流动堆积行为离散元模拟及实验研究. 力学与实践, 2012, 34(1): 20-26\r
\r
刘倩, 雷丽萍, 曾攀. 血管支架径向支撑能力的数值模拟和实验研究. 中国医疗器械杂志. 2010, 34(30): 175-179\r
\r
Lei L P, Wang N, Zeng P. Experiment and modeling of plastic anisotropy for AZ31B Mg-alloy. Inter. Steel research. 2010, 81(9): 1267-1270\r
\r
Lu Y J, Qu T M, Zeng P, Lei L P, Fang G, Sun J F. The influence of electroplastic rolling on the mechanical deformation and phase evolution of Bi-2223/Ag tapes, Journal of Materials Science. 45(13): 3514-3519, 2010\r
\r
Sun C Y, Fang G, Lei L P, Zeng P. Micro-thermomechanical constitutive model of transformation induced plasticity and its application on armour steel. Materials Science and Engineering A. 2009, 499(1-2): 18-22\r
\r
Zeng P, Gao Y, Lei L P. Welding process simulation under varying temperatures and constraints. Materials Science and Engineering A, 2009, 499(1-2): 287-292\r
\r
Lu Y J, Zeng P, Lei, L P, et al. Investigation on drawing process of Bi-2223/Ag wires using racetrack-type dies: Simulation and experiments. Science in China, Series E: Technological Sciences.2009, 52( 8): 2255-2262\r
\r
卢永进, 雷丽萍, 赵迎红, 曾攀 ,方刚, 孙剑锋. 椭圆截面多芯超导线材轧制变形行为的研究. 材料科学与工艺. 2009, 17(5): 597-602\r
\r
郇宜伟, 雷丽萍, 方刚, 曾攀. 高炉铜冷却壁热力耦合的有限元分析. 冶金设备. 2009, (3): 45-49\r
\r
王娜, 雷丽萍, 方刚, 曾攀. 镁合金变形的晶体塑性有限元分析. 稀有金属. 32(6): 766-773, 2008\r
\r
曾攀, 雷丽萍, 方刚, 张晓峰, 蔡芳. 多芯铋系超导材料轧制过程中的变形分布研究. 塑性工程学报. 2008, 15(2): 1-5\r
\r
曾攀, 高懿, 雷丽萍. 用于板材焊接变形预测的原位等效焊接单元. 中国科学E. 2008，38(9): 1464-1468\r
\r
宁静, 曾攀, 雷丽萍. 血管支架膨胀过程中的塑性变形行为. 清华大学学报. 2008, 48（5）: 781-784\r
\r
王金鹏, 曾攀, 雷丽萍. 2024Al高温高应变率下动态塑性本构关系的试验研究. 塑性工程学报. 2008, 15(3): 101-104\r
\r
孙朝阳, 方刚, 雷丽萍, 曾攀. 温度和相变影响的弹塑性本构关系及应用. 材料热处理学报. 2008, 29(1) : 162-166\r
\r
孙朝阳, 方刚, 雷丽萍, 曾攀. 装甲钢马氏体相变塑性的试验研究. 塑性工程学报. 2008, 15(1): 70-75\r
\r
Sun C Y, Fang G, Lei L P, Zeng P. Micromechanics model of martensitic transformation induced plasticity. J. Materials Processing Technology. 2008, 201(1-3):226-231\r
\r
宁静, 曾攀, 雷丽萍. 血管支架紧缩行为的非线性有限元分析. 中国医疗器械杂志. 2008, 32(1):10-13\r
\r
Zeng P, Lu Y J, Lei L P, Fang G. Frame of Micro-Forming in Macro-Field. The 9th International Conference on Technology of Plasticity. Gyeongju, Korea. Sept. 8-11, 2008,THD2-2: 1872-1877\r
\r
Lu Y J, Zeng P, Lei L P, Sun J F. Optimization of cross-sectional shapes of the Bi-2223/Ag wires before flat rolling. Proceeding of the 8th ICFDM. Tianjin, China, Sept. 23-26, 2008，2467-2472\r
\r
Wang N, Lei L P, Zeng P. Mechanical behaviours of a hot-Rolled AZ31B Mg-alloy at room temperature. Proceeding of the 8th ICFDM. Tianjin, China, Sept. 23-26, 2008 1871-1874\r
\r
曹鹏, 方刚, 雷丽萍, 曾攀. 多晶铜压缩过程中晶粒取向演化的塑性理论分析. 金属学报. 2007, 43(9): 913-919 \r
\r
Zhao Y H, Zeng P, Lei L P, Yi H P. Experimental investigation on constitutive behaviour of superconducting powder BSCCO. J Mater Sci, 2007, 42: 4692-4700\r
\r
孙朝阳, 曾攀, 雷丽萍, 方刚. 基于物理模拟的相变塑性应变分离方法. 塑性工程学报. 2007, 14(6): 161-164\r
\r
曾攀, 卢永进, 雷丽萍, 赵迎红, 方刚. 宏域微成形与铋系超导带材的加工. 锻压技术. 2007, 32(6):125-129\r
\r
Lei L P, Zhao Y H, Zeng P. Influence of roll diameters on deformation behaviour of high temperature superconductiong tape.Chinese Journal of Mechanical Engineering. 2007, 20(4): 75-78\r
\r
Zeng P, Lei L P, Zhao R H, Li Y, Chen Y B, Tang X. Numerical analyses of design and assembly for main components of BESIII. Chinese Journal of Mechanical Engineering. 2007, 20(5): 96-100\r
\r
Zhao Y H, Lei L P, Zeng P. Numerical simulation of mechanical behavior of superconducting powder BSCCO. Chinese Journal of Mechanical Engineering. 2007, 20(3): 59-61\r
\r
雷丽萍, 方刚, 赵迎红, 曾攀. 高温超导带材拉拔过程中的变形机制研究. 机械设计. 2006年增刊: 128－130\r
\r
蔡芳, 雷丽萍, 赵迎红, 曾攀. Bi系高温超导单芯线材拉拔工艺的数值模拟. 中国机械工程. 2006, 17: 2010-2013\r
\r
赵迎红, 雷丽萍, 曾攀. 超导粉末BSCCO单晶体本构行为的研究. 清华大学学报. 2006, 11: 1813-1815\r
\r
Lei L P, Zhao Y H, Zeng P. Influence of roll diameters on deformation behaviour of high temperature superconductiong tape. Chinese Journal of Mechanical Engineering. 2007, 20(4): 75-78\r
\r
曾攀, 雷丽萍, 石亦平, 石刚, 娄路亮, 孔劲. 面向数值成形制造的高精度模拟计算技术. 数值制造科学. 2005, 3(2): 16－41\r
\r
曾攀, 赵迎红, 雷丽萍. Bi系高温超导带材中的塑性微成形技术. 塑性工程学报. 2005, Sup. : 25-30\r
\r
赵迎红, 雷丽萍, 曾攀. 微塑性成形技术及其力学行为特征. 塑性工程学报. 2005, 12(6)：1-6\r
\r
曾攀, 杨濯, 雷丽萍, 李路明. 微小卫星特征结构模块的振动模态测试与计算补偿. 工程设计学报. 2004,11(3): 119-123\r
\r
Lei L P, Kim J, Kang B S. Bursting failure prediction in tube hydroforming processes by using rigid-plastic FEM combined with ductile fracture criterion. International Journal of Mechanical Sciences. 2002, 44(7): 1411-1428 \r
\r
方刚, 雷丽萍, 曾攀. 基于有限元分析的汽车覆盖件模具设计. 模具工业. 2002, 6(256): 6-10\r
\r
雷丽萍, 方刚, 曾攀, 张慧玲. 汽车副架液压胀形预成形工艺设计的数值模拟. 塑性工程学报. 2002, 9(2): 76-78\r
\r
Fang G, Lei LP, Zeng P. Three-dimensional rigid-plastic finite element simulation for the two-roll cross-wedge rolling process，J MATER PROCESS TECH 129 (1-3): 2002: 245-249 \r
\r
Kim J, Lei L P, Hwang S M, Kang S J, Kang B S. Manufacture of an automobile lower arm by hydroforming. International Journal of Machine Tools and Manufacture. 2002, 42(1): 69-78\r
\r
Lei L P, Kim D H, Kang S J, Hwang S M, Kang B S. Analysis and design of hydroforming processes by the rigid–plastic finite element method. Journal of Materials Processing Technology. 2001,114(3): 201-206\r
\r
Lei L P, Kang B S, Kang S J. Prediction of the forming limit in hydroforming processes using the finite element method and a ductile fracture criterion. Journal of Materials Processing Technology. 2001, 113(1-3): 673-679\r
\r
Kim J, Chang Y C, Lei L P, Kang B S. Analysis and design of hydroforming process for automobile lower arm by FEM. The 7th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM 2001), Pusan, Korea, June 2001: 885-890\r
\r
Lei L P, Hwang S M, Kang B S. Finite element analysis and design in stainless steel sheet forming and its experimental comparison. Journal of Materials Processing Technology. 2001, 110(1): 70-77\r
\r
Lei L P, Kim J, Kang B S. Analysis and design of hydroforming process for automobile rear axle housing by FEM. International Journal of Machine Tools and Manufacture. 2000, 40(12): 1691-1708