(1) Yong Kong, Guodong Jiang, et al. Amine hybrid aerogel for high-efficiency CO2 capture: Effect of amine loading and CO2 concentration. Chemical Engineering Journal, 2016, 306: 362-368(2) Yong Kong, Xiaodong Shen, et al. Dynamic capture of low-concentration CO2 on amine hybrid silsesquioxane aerogel. Chemical Engineering Journal, 2016, 283: 1059-1068(3) Yong Kong, Xiaodong Shen, et al. Amine hybrid zirconia/silica composite aerogel for low-concentration CO2 capture. Microporous and Mesoporous Materials, 2016, DOI: 10.1016/j.micromeso.2016.08.036(4) Yong Kong, Xiaodong Shen, et al. Facile synthesis of amine hybrid aerogel with high adsorption efficiency and regenerability for air capture via solvothermal-assisted sol-gel process and supercritical drying. Green Chemistry, 2015, 17: 3436-3445(5) Yong Kong, Xiaodong Shen, et al. Development of monolithic adsorbent via polymeric sol-gel process for low-concentration CO2 capture. Applied Energy, 2015, 147: 308-317(6) Yong Kong, Guodong Jiang, et al. A new aerogel based CO2 adsorbent developed using a simple sol–gel method along with supercritical drying. Chemical Communications, 2014, 50(81): 12158-12161(7) Yong Kong, Ya Zhong, et al. Effect of silica sources on nanostructures of resorcinol-formaldehyde/silica and carbon/silicon carbide composite aerogels. Microporous and Mesoporous Materials, 2014, 197: 77-82(8) Yong Kong, Xiaodong Shen, et al. Use of monolithic silicon carbide aerogel as a reusable support for development of regenerable CO2 adsorbent. RSC Advances, 2014, 4: 64193-64199(9) Yong Kong, Xiaodong Shen, et al. Preparation of monolith SiC aerogel with high surface area and large pore volume and the structural evolution during the preparation. Ceramics International, 2014, 40: 8265-8271(10) Yong Kong, Xiaodong Shen, et al. Synthesis of monolithic mesoporous silicon carbide from resorcinol-formadehyde/silica composites. Materials Letters, 2013, 99: 108-110
