[1] Yufen Zhang, Carsten Blawert*, Shawei Tang, Jin Hu* et al. Influence of surface pre-treatment on the deposition and corrosion properties of hydrophobic coatings on a magnesium alloy. Corrosion Science 2016 published online [2]Yufen Zhang, Shawei Tang, Jin Hu*. Formation mechanism and corrosion resistance of the hydrophobic coating on anodizing magnesium. Corrosion Science 111 (2016) 334-343 [3] Liu GY, Tang SW, Li DC, Hu J*. Self-adjustment of calcium phosphate coating on micro-arc oxidized magnesium and its influence on the corrosion behaviour in simulated body fluids. Corrosion Science 79 (2014) 206–214 [4] Tang SW, Hu J*. Corrosion behaviour of cerium-based conversion coating on alumina borate whisker-reinforced AA6061 composite pre-treated by hydrogen fluoride. Corrosion Science. 53 (2011) 2636-264 [5] Hu J*, Tang SW. Zhang ZY. Microstructure and formation mechanism of cerium conversion coating on alumina borate whisker-reinforced aluminum alloy 6061 composite. Corrosion Science 50 (2008) 3185-3192 [6] Yu YC, Tang SW, Hu J*. Effects of heat-treatment on the interfacial reaction and tensile properties of Al2O3 coated Al18B4O33w/Al-Mg matrix composites. Mater. Des. 90 (2016) 416-423[7] Gang. Liu, Shawei.Tang, Wenchao. Ren, Jin Hu*. Effect of thermal cycling on the damping behavior in alumina borate whisker without and with Bi2O3 coating reinforced pure aluminum composites. Mater. Des. 60(2014)244-249[8] Liu G, Tang SW, RenWC, Hu J* Damping peak and damping mechanism in Al18B4O33w/Al composite containing Sn and Bi interfacial phases at room temperature. Mater. Des. 46 (2013) 916-921[9] GY Liu，Shawei Tang,a Jin Hu*, Corrosion Behavior of Micro-Arc Oxidized Magnesium with Calcium Phosphate Coating in Flowing Simulated Body Fluids. Journal of The Electrochemical Society, 162 (9) C1-C7 (2015)[10] J. Hu*, XF Wang, SW Tang. A study of damping capacities in pure aluminum matrix composites reinforced with SnO2-coated and uncoated alumina borate whiskers. Comp.Sci.Technol. 68 (2008) 2297-2299
