个人简历
国家863计划重大项目“重型燃气轮机关键技术及系统”总体专家组专家，中国工程热物理学会理事，航天科技集团公司一院一部水下发射技术中心客座研究员，中船重工集团公司蒸汽动力系统国防重点实验室学术委员会委员，《工程热物理学报》、《推进技术》编委。发表SCI论文70余篇，EI论文150余篇。承担国家自然科学基金、军科委创新特区、国防基础科研、航天及中船重工等院所科研项目，获国防科技进步二等奖。主要研究方向：高效高负荷叶轮机械设计及其非定常分离流动控制机理、高温涡轮冷却流动机制及流场结构优化、微型发动机总体设计及部件性能研究、气-固-液多相多场耦合流动仿真。荣誉称号2001年 获哈尔滨工业大学校部机关优秀共产党员2003年 获哈尔滨工业大学优秀专兼职学生工作者2017年 获哈尔滨工业大学优秀兼职学生工作者称号工作经历1996.3~1997.12 哈尔滨工业大学能源科学与工程学院 助教1997.12~1999.7 哈尔滨工业大学能源科学与工程学院 讲师1999.7~2004.7 哈尔滨工业大学能源科学与工程学院 副教授2004.7~至今 哈尔滨工业大学能源科学与工程学院 教授2005.4~至今 哈尔滨工业大学能源科学与工程学院 博士生导师2006.9~2015.1 哈尔滨工业大学能源科学与工程学院 副院长2015.3~至今 哈尔滨工业大学能源科学与工程学院推进理论与技术研究所所长教育经历1. 1988.9~1992.7 哈尔滨工业大学热力叶轮机械专业 本科2. 1992.9~1997.12 哈尔滨工业大学热力叶轮机械专业 硕博连读团队成员在读硕士王钊 课题：基于Kriging代理模型的组合式等离子体控制叶顶泄漏流动研究黄永奎 课题：微型燃气轮机CW型原表面回热器芯体内传热及流动特性分析张婕 课题：微型涡喷发动机压气机气动设计及优化研究徐东强 课题：微型涡轮动力装置向心涡轮设计及优化研究孙丰实 课题：航行体水下发射燃气后效建模及筒口压力特征研究在读博士王坤 课题：透平机械内部流动的不确定性量化与稳健性优化研究杨燕昭 课题：微型发动机向心涡轮设计及试验技术研究张以宁 课题：DBD等离子体改善涡轮叶顶泄漏流动机制的实验及数值模拟研究近几年毕业硕士张以宁 课题：介质阻挡放电等离子体放电过程数值模拟及气动激励特性研究 毕业去向：哈尔滨工业大学攻读博士学位郭峰 课题：Co-Kriging代理模型在压气机叶栅气动优化中的应用研究 毕业去向：中国航发商发有限公司（上海）李乐 课题：DBD等离子体诱导涡影响气膜冷却结构的数值研究 毕业去向：宁德时代新能源科技股份有限公司（福建宁德）吴泽峰 课题：基于压缩感知的叶片安装角的不确定性分析 毕业去向：宁德时代新能源科技股份有限公司（福建宁德）孟睿 课题：变参数蜂窝叶顶对涡轮叶栅顶部间隙泄漏流动的影响 毕业去向：上海电气电站设备有限公司穆泽楠 课题：数值水池的研究及非规则波的模拟 毕业去向：四川航天长征装备制造有限公司（成都）姜帅 课题：端壁横向射流对高速扩压叶栅损失特性的影响 毕业去向：哈尔滨工业大学攻读博士学位黄星 课题：轴流压气机自循环引气及射流扩稳的数值研究 毕业去向：华为技术有限公司（深圳）郭玉杰 课题：蜂窝机匣对涡轮级性能影响的数值研究 毕业去向：中国航发商发有限公司（上海）李德雄 课题：某型微型离心压气机流场分析及其改型研究 毕业去向：中国航空无线电电子研究所（上海）近几年毕业博士付云峰 课题：蜂窝叶顶结构控制涡轮叶栅叶尖泄漏流动的机理研究 毕业去向：中国空气动力研究与发展中心计算空气动力研究所（成都）陈聪 课题：射流旋涡发生器对轴流压气机流动分离控制及其优化研究 毕业去向：中船重工719所（武汉）吴晓笛 课题：基于浸入边界-格子Boltzmann通量法的椭圆柱涡激振动数值研究 毕业去向：同济大学博士后马贵辉 课题：等压排气改善潜射航行体出水特性及稳健性机理研究 毕业去向：哈尔滨工程大学任教李国占 课题：等离子体气动激励改善气膜冷却流动特性的大涡模拟研究 毕业去向：中国计量大学任教（杭州）俞建阳 课题：DBD等离子体诱导涡结构控制附面层流动研究 毕业去向：哈尔滨工业大学师资博士后王云飞 课题：低压涡轮叶栅非定常流场演化特性的大涡模拟研究 毕业去向：山东理工大学任教（淄博）刘雷 课题：S弯进气道出口畸变控制及其对跨声速风扇流场影响研究 毕业去向：杭州电子科技大学任教讲授课程1.《空气动力学》 能源科学与工程学院 本科生三年级2.《叶片机原理》 能源科学与工程学院飞行器动力工程专业 本科生四年级3.《基于先进CFD技术的航空航天飞行器动力学仿真》 本科生创新研修课4.《实验空气动力学》 能源科学与工程学院动力机械及工程专业 硕士研究生5.《计算流体力学》 能源科学与工程学院动力机械及工程专业 硕士研究生招生信息硕士招生：每年招硕士研究生2名，研究方向是叶轮机械通流部分设计与流动分析、气-液-固多相多场耦合流动仿真等。博士招生：每年招博士研究生2名，研究方向是叶轮机械通流部分设计与流动分析、气-液-固多相多场耦合流动仿真等。专著[1]陈浮, 宋彦萍等编著. 气体动力学基础. 哈尔滨工业大学出版社, 2014.（“十二五“国家重点图书出版规划项目/航空航天精品系列）[2]陈浮, 权晓波, 宋彦萍编著. 空气动力学基础. 哈尔滨工业大学出版社, 2015.（工业和信息化部“十二五”规划教材/“十二五“国家重点图书出版规划项目）
研究领域
高效高负荷叶轮机械设计及其非定常分离流动控制机理、高温涡轮冷却流动机制及流场结构优化、微型发动机总体设计及部件性能研究、气-固-液多相多场耦合流动仿真。"1. 叶轮机械气动热力学2. 航行体水动力学"
近期论文
2020年[1]Wang Kun, Chen Fu, Yu Jianyang, Song Yanping. Nested Sparse-grid Stochastic Collocation Method for Uncertainty Quantification of Blade Stagger Angle. Energy, 2020, 201[2]Wang Kun, Chen Fu, Yu Jianyang, Song Yanping. Probabilistic CFD Computations of Turbine Blade under Uncertain Operational Conditions. Proceedings of ASME Turbo Expo 2020, GT2020-14749[3]Jiang Shuai, Yu Jianyang, Chen Fu, Chen Shaowen, Song Yanping. Effect of End-wall Motion on Leakage Flow Control of Bending Clearance in Turbine Cascade. Proceedings of ASME Turbo Expo 2020, GT2020-16095[4]Wang Yabo, Yu Jianyang, Song Yanping, Chen Fu. Parameter Optimization of the Composite Honeycomb Tip in a Turbine Cascade. Energy, 2020, 197[5]Jiang Shuai, Yu Jianyang, Wang Hongwu, Chen Fu, Chen Shaowen, Song Yanping. Experimental Investigation of the Bending Clearance on the Aerodynamic Performance in Turbine Blade Tip Region. Energy, 2020, 197[6]Jin Jiahui, Song Yanping, Yu Jianyang, Chen Fu. Effect of Arbitrary Blade Tip Design on Tip Leakage Flow. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2020, 234(1):19-30[7]Jin Jiahui, Song Yanping, Yu Jianyang, Chen Fu. Numerical Study of Novel-tips on Tip Leakage Flow Control in Turbine Cascade. Proceedings of ASME Turbo Expo 2020, GT2020-151222019年[1]Chen Fu, Fu Yunfeng, Yu Jianyang, Song Yanping. Effect of Clearance Height on Tip Leakage Flow Reduced by a Honeycomb Tip in a Turbine Cascade. Proceedings of the Institution of Mechanical Engineers, Part G, Journal of Aerospace Engineering, 2019, 233(10): 3564-3576[2]Ma Guihui, Chen Fu, Yu Jianyang, Wang, Kun, Jiang Shuai. Effects of Uncertainties in the Launch Parameters on the Pressure-Equalizing Air Film around a Vertically Launched Underwater Vehicle. Journal of Fluids Engineering-Transaction of the ASME, 2019, 141(10)[3] Ma Guihui, Chen Fu, Yu Jianyang, Wang, Kun. Numerical Investigation of Trajectory and Attitude Robustness of an Underwater Vehicle Considering the Uncertainty of Platform Velocity and Yaw Angle. Journal of Fluids Engineering-Transaction of the ASME, 2019, 141(2)[4]Ma Guihui, Chen Fu, Yu Jianyang. Effect of Pitch-to-diameter Ratio and Row-spacing-to-diameter Ratio of Venting Holes on Evolution Process of Air Film around a Vertically Launched Underwater Vehicle. Modern Physics Letters B, 2019, 33(10)[5]Jiang Shuai, Chen Fu, Yu Jianyang, Chen Shaowen, Song Yanping. Treatment and Optimization of Casing and Blade Tip for Aerodynamic Control of Tip Leakage Flow in a Turbine Cascade. Aerospace Science and Technology, 2019, 86:704-713[6]Jiang Shuai, Chen Fu, Yu Jianyang, Chen Shaowen, Song Yanping. Study on Leakage Loss Control Method of Circumferential Bending Clearance. Proceedings of ASME Turbo Expo 2019, GT2019-90199[7]Wang Zhao, Yu Jianyang, Chen Fu, Song Yanping. Effect of Multiple DBD Plasma Actuators on the Tip Leakage Flow Structure and Loss of a Turbine Cascade. International Journal of Heat and Fluid Flow, 2019, 77:377-387[8]Yu Jianyang, Bao Wenchun, Chen Fu, Song Yanping, Wang Cong. Optimization and Evaluation of Multiple DBD Plasma Actuators Applied in the Tip Leakage Control for Turbine Cascade. Proceedings of ASME Turbo Expo 2019, GT2019-90208[9]Yu Jianyang, Wang Zhao, Chen Fu, Yu Jianing, Wang Cong. Kriging Surrogate Model Applied in the Mechanism study of Tip Leakage Flow Control Turbine Cascade by Multiple DBD plasma Actuator. Aerospace science and technology, 2019, 85:216-228[10]Yu Jianyang, Yu Jianing, Chen Fu, Wang Cong. Numerical Study of Tip Leakage Flow Control in Turbine Cascades Using the DBD Plasma Model Improved by the Parameter Identification Method. Aerospace science and technology, 2019, 84:856-864[11]Chen Cong, Liu Huaping, Chen Fu. Effect of the End-wall Vortex Generator Jets on the Performance of a High Subsonic Compressor Cascade. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2019, 233(3):324-336[12]Wang Yabo, Song Yanping, Yu Jianyang, Chen Fu. Effect of the Injection Orientation and Position on the Leakage Flow in a Honeycomb-tip Turbine Cascade. International Journal of Heat and Mass transfer, 2019, 144[13]Hao Haohao, Song Yanping, Yu Jianyang, Chen Fu, Liu Tian. Numerical Analysis of Water Exit for a Sphere with Constant Velocity Using the Lattice Boltzmann Method. Applied Ocean Research, 2019, 84:163-178[14]Jin Jiahui, Song Yanping, Yu Jianyang, Chen Fu. Modification and Optimization Strategies for Turbine Arbitrary Blade Tips. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2019, 233(6):675-688[15]Wang Yabo, Song Yanping, Yu Jianyang, Chen Fu. Effect of the Double-Slot Injection on the Leakage Flow Control in a Honeycomb-Tip Turbine Cascade. Proceedings of ASME Turbo Expo 2019, GT2019-905892018年[1]Fu Yunfeng, Chen Fu, Liu Huaping, Song Yanping. Experimental and Numerical Study of Honeycomb Tip on Suppressing Tip Leakage Flow in Turbine Cascade. ASME Journal of Turbomachinery, 2018, 140(6)[2]Fu Yunfeng, Chen Fu, Yu Jianyang, Song Yanping. Effective Control of Composite Honeycomb Structures on the Tip Leakage Flow in Turbine Cascade. Journal of aerospace engineering, 2018, 31(6)[3]Ma Guihui, Chen Fu, Yu Jianyang, Song Yanping, Mu Zenan. Effect of Pressure-Equalizing Film on Hydrodynamic Characteristics and Trajectory Stability of an Underwater Vehicle with Injection through One or Two Rows of Venting Holes. ASME Journal of Fluids Engineering, 2018, 140(9)[4]Ma Guihui, Chen Fu, Yu Jianyang, Liu Huaping. Flow Mechanism and Characteristics of Pressure-equalizing Film along the Surface of a Moving Underwater Vehicle. ASME Journal of Fluids Engineering, 2018, 140(4)[5]Ma Guihui, Chen Fu, Yu Jianyang, Jiang Shuai. Effect of a Pressure-equalizing Film on the Trajectory and Attitude Robustness of an Underwater Vehicle Considering the Uncertainty of the Platform Velocity. Engineering Applications of Computational Fluid Mechanics, 2018, 12(1):824-838[6]Chen Cong, Chen Fu, Yu Jianyang. Experimental Investigation of End-wall VGJs in a Compressor Cascade. Applied Thermal Engineering, 2018, 145: 386-395[7]Wu Xiaodi, Liu Huaping, Chen Fu. Numerical Investigation of Flow Characteristics around Two Side by Side Cylinders by Immersed Boundary-lattice Boltzmann Flux Solver. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering). 2018, 19(5):384-398[8]Chen Cong, Yu Jianyang, Chen Fu. Effect of End-wall Vortex Generator Jet Parameters on Flow Control in High Subsonic Compressor Cascade. Proceedings of ASME Turbo Expo 2018, GT2018-75910[9]Yu Jianyang, Wang Zhao, Chen Fu, Yan Guojun, Wang Cong. Large Eddy Simulation of the Elliptic Jets in Film Cooling Controlled by DBD Plasma Actuators with an Improved Model. ASME Journal of Heat Transfer, 2018, 140(12)[10]Qin Yong, Song Yanping, Chen Fu, Wang Ruoyu. Active Flow Control by means of Endwall Synthetic Jet on a High-speed Compressor Stator Cascade. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2018, 232(6): 641-659[11]Wang Yabo, Song Yanping, Yu Jianyang, Chen Fu. Numerical Study of the Effect of the Cavity Depth on the Leakage Control in a Cooled Honeycomb-tip Turbine Cascade. Applied Thermal Engineering, 2018, 138:292-299[12]Wang Yabo, Song Yanping, Yu Jianyang, Chen Fu. Effect of Cooling Injection on the Leakage Flow of a Turbine Cascade with Honeycomb tip. Applied Thermal Engineering, 2018, 133: 690-703[13]Qin Yong, Song Yanping, Wang Ruoyu, Liu Huaping, Chen Fu. Flow Separation Control on a Highly Loaded Compressor Cascade Using Endwall Synthetic Jets. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2018, 232(11): 2059-2075“十一五”国家863计划重大项目“重型燃气轮机关键技术及系统”总体专家组专家中国工程热物理学会理事《工程热物理学报》第六届编委《推进技术》第十三届编委航天科技集团公司一院一部水下发射技术中心客座研究员中船重工集团公司蒸汽动力系统国防重点实验室学术委员会委员中国动力工程学会会员《航空学报》、《机械工程学报》、《推进技术》、《Chinese Journal ofAeronautics》、《Propulsion and PowerResearch》评审
