个人简历

教育经历
1987.9 1991.7 上海交通大学 核反应堆工程 学士
1983.9 1987.7 辽宁省辽阳市辽化高中 无
2001.3 2006.8 大连理工大学 动力机械及工程 博士
1996.9 1999.7 大连理工大学 热能工程 硕士
工作经历
2016.7 至今 大连理工大学能源与动力学院 博导
2010.11 2011.11 Kingston University, UK，Faculty of Engineering 访问学者
2007.12 至今 大连理工大学能源与动力学院 副教授
2007.12 2010.11 大连理工大学能源与动力学院 副教授
1999.7 2007.12 大连理工大学动力系 讲师
1991.8 1996.9 大连起重 机器厂 助理工程师
科研项目
含有不凝气蒸汽管内直接接触凝结流动特征及热质传递机理, 国家自然科学基金项目, 2017/08/17, 进行
非能动安全壳降膜冷却流动与传热特性研究, 企事业单位委托科技项目, 2017/04/01-2018/12/31, 完成
椭圆管蒸发式凝汽器传热与流动技术开发, 企事业单位委托科技项目, 2015/11/15-2016/12/31, 完成
带有定位格架堆芯通道内超临界流体传热强化研究, 企事业单位委托科技项目, 2015/04/29-2016/04/30, 完成
锦州开元石化有限责任公司能源审计, 企事业单位委托科技项目, 2012/10/10-2012/10/31, 完成
能源审计, 企事业单位委托科技项目, 2012/11/08-2013/12/31, 完成

研究领域

""

近期论文

[1]Zhu, Xiaojing,Chen, Shi,Shen, Shengqiang,Ni, Shuangquan,Shi, Xu,Qiu, Qinggang.Experimental study on the heat and mass transfer characteristics of air-water two-phase flow in an evaporative condenser with a horizontal elliptical tube bundle[J],APPLIED THERMAL ENGINEERING,2020,168
[2]Zhang, Xiaocui,Meng, Chuiju,Qiu, Qinggang,Quan, Shenglin,Shen, Shengqiang.A numerical investigation of liquid film flow and film thickness distribution outside a horizontal tube[J],INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES,2018,13(4):424-431
[3]Qiu, Qinggang,Zhao, Shuai,Du, Xin,Zhu, Xiaojing,Shen, Shengqiang.Numerical investigation of flow and heat transfer in the sub-channel of an SCWR core with split-vanes[J],INTERNATIONAL JOURNAL OF LOW-CARBON TECHNOLOGIES,2018,13(4):414-423
[4]Qiu, Qinggang,Zhang, Xiaocui,Quan, Shenglin,Zhu, Xiaojing,Shen, Shengqiang.3D numerical study of the liquid film distribution on the surface of a horizontal-tube falling-film evaporator[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,124:943-952
[5]邱庆刚,赵帅,丁雅倩,朱晓静,杜鑫.交错叶片型定位格架对SCWR堆芯子通道流动及 换热影响分析[J],热科学与技术,2018,17(4):267-272
[6]Qiu, Qinggang,Zhang, Xiaocui,Zhu, Xiaojing,Quan, Shenglin,Shen, Shengqiang.Influential analysis of geometrical parameters on falling-film thickness and distribution of sheet flow outside horizontal tube[J],DESALINATION AND WATER TREATMENT,2018,124:98-105
[7]邱庆刚,孟垂举,权生林,沈胜强.顺、叉排柱状流型液膜铺展与液膜厚度分布规律研究[J],太阳能学报,2018,05:1263-1269
[8]Qiu, Qinggang,Du, Xin,Zhao, Shuai,Zhu, Xiaojing,Shen, Shengqiang.Numerical study on heat transfer of SCW near the pseudo-critical temperature in a hexagon sub-channel[J],NUCLEAR ENGINEERING AND DESIGN,2018,331:263-273
[9]杜鑫,邱庆刚,丁雅倩,朱晓静.超临界水冷堆子通道中熵产行为数值研究[J],哈尔滨工程大学学报,2018,39(8):1290-1295
[10]Zhu, Xiaojing,Du, Xin,Li, Qiang,Qiu, Qinggang.Study on the effects of system parameters on entropy generation behavior of supercritical water in a hexagon rod bundle[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,117:669-681
[11]邱庆刚,孟垂举,权生林,蒋维国,沈胜强.相邻液柱在横管外成膜规律的三维数值模拟[J],工程热物理学报,2018,39(5):1044-1048
[12]邱庆刚,孟垂举,张琨,沈胜强.横管降膜过程中液膜内流动和传热特性分析[J],热科学与技术,2018,17(2):111-117
[13]张小翠,邱庆刚,朱晓静,李本文.Study on liquid film thickness and flow characteristics of falling film outside an elliptical tube[A],Desalination for the Environment: Clean Water and Energy,2018,AT114
[14]龙黄祥,朱晓静,邱庆刚.Numerical study on falling film heat transfer characteristics in passive containment cooling system[A],2018 NPIC-LRSDT Annual Meeting & 4th International Workshop on NUSSA, November 5-6, 2018, Chengdu, China,2018
[15]陈乐乐,邱庆刚.轻质点阵夹芯结构内流动的数值模拟研究[A],2018年中国工程热物理学会多相流学术会议，2018, 10.19-22，北京,2018,186213
[16]张小翠,陈乐乐,邱庆刚.低逆流气流速度对椭圆管外降膜流动和液膜厚度的影响[A],2018度中国工程热物理学会传热传质学术会议，2018，10.12-15，哈尔滨,2018,183382
[17]邱庆刚,张小翠,朱晓静,沈胜强.Study on effect of counter-current air flow on flow behavior of liquid falling film outside horizontal tubes[A],16th International Heat Transfer Conference, August 10-15, 2018, Beijing, China,2018,23707
[18]邱庆刚,陈乐乐,张小翠,沈胜强.水平管外液膜厚度分布规律数值研究[A],高等学校工程热物理第二十四届全国学术会议，2018, 05.18-21，唐山,2018,B-2018027
[19]权生林,赵鹏达,林开欣,邱庆刚,沈胜强.Numerical simulation of the convection and diffusion process of the discharge of hot concentrated brine in desalination[A],The International Conference on Desalination for the Environment: Clean Water and Energy, 2018,2018
[20]权生林,赵佳悦,孟飞,邱庆刚,沈胜强.A numerical study of mixed convection within a liquid flowing on an open horizontal channel[A],17th International Conference on Sustainable Energy Technologies,2018,SET2018-304
[21]王峰,郭亚丽,邱庆刚,沈胜强.Numerical Simulations on Flow and Heat Transfer of Double Droplets Successively Impinging on Heated Surface[A],The 16th International Heat Transfer（IHTC16）,2018
[22]王牧,王鹏,鲍奕尘,邱庆刚,赵亮,沈胜强.可视化空心喷嘴流场实验研究[A],2018年中国工程热物理学会多相流学术会议暨国家自然科学基金多相流领域项目进展交流会,2018
[23]邱庆刚,朱晓静,权生林,沈胜强.Numerical Prediction of Liquid Film Flow Characteristics of Column Flow outside Horizontal Tubes[A],3rd Thermal and Fluids Engineering Conference (TFEC),2018,TFEC-2018-22291
[24]Zhang, Kun,Zhu, Xiajing,Ren, Xiaotong,Qiu, Qinggang,Shen, Shengqiang.Numerical investigation on the effect of nozzle position for design of high performance ejector[J],APPLIED THERMAL ENGINEERING,2017,126:594-601
[25]Zhu, Xiaojing,Du, Xin,Ding, Yaqian,Qiu, Qinggang.Analysis of entropy generation behavior of supercritical water flow in a hexagon rod bundle[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2017,114:20-30
[26]王海鹏,邱庆刚,张博.风剪切来流对风力机近尾迹流动特性影响[J],热科学与技术,2017,16(2):120-126
[27]Qiu, Qinggang,Meng, Chuiju,Quan, Shenglin,Wang, Weishu.3-D simulation of flow behaviour and film distribution outside a horizontal tube[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2017,107:1028-1034
[28]Qiu, Qinggang,Du, Xin,Zhu, Xiaojing,Shen, Shengqiang.Study on flow and heat transfer in a finned internal cooling duct[J],APPLIED THERMAL ENGINEERING,2017,113:58-69
[29]邱庆刚,丁雅倩,朱晓静,杜鑫.定位格架对超临界水冷堆堆芯换热的影响[J],热科学与技术,2017,16(1):20-25
[30]邱庆刚,朱晓静,沈胜强.非能动安全壳外降膜流动与液膜铺展特性研究[A],2017
[31]邱庆刚,朱晓静.Effects of Split-vane Type Grid on Flow and Heat Transfer of Supercritical Water in SCWR[A],Asian Conference on Thermal Sciences 2017,2017,ACTS-P00332
[32]邱庆刚,朱晓静.交错叶片型定位格架对SCWR堆芯子通道流动及换热影响分析[A],高等学校工程热物理第二十三届全国学术会议,2017,B2017011
[33]朱晓静,邱庆刚,沈胜强.Numerical Study of Grid Spacer Effect on Heat Transfer of SCW in Vicinity of Pseudo-critical Temperature[A],2017,ACTS-P00066
[34]权生林,邱庆刚,沈胜强.Numerical Simulation of Falling Film Evaporation on Horizontal Tubes with Crossing Flowing Gas[A],2017
[35]朱晓静,邱庆刚.超临界水在类矩形通道内传热与阻力特性实验研究[J],中国电机工程学报,2017,37(3):819-825
[36]邱庆刚,沈胜强.蒸发式乏汽凝汽器传热传质性能实验研究[A],中国工程热物理学会2017年多相流学术会议,2017,176096
[37]邱庆刚,朱晓静,沈胜强.The analysis of the fluxion and heat transfer in the liquid film during the process of horizontal tube falling film[A],2017,ICTST-Man-006
[38]邱庆刚,朱晓静.交错叶片型定位格架对SCWR堆芯子通道涡流及二次流影响分析[A],2017,173226
[39]邱庆刚,朱晓静,沈胜强.非能动安全壳冷却系统中降膜流动特性分析[A],2017,173242
[40]邱庆刚,沈胜强.柱状流下水平管周向液膜厚度分布规律数值研究[A],高等学校工程热物理第二十三届全国学术会议,2017,B2017016
[41]沈胜强,邱庆刚.大型蒸发式冷凝器的精确设计与研究[A],中国工程热物理学会2017年传热传质学术会议,2017
[42]朱晓静,邱庆刚.Numerical Investigation on Flow and HeatTransfer in Sub-channel of SCWR Core with Split-vans[A],2017,SET2017-344
[43]邱庆刚,朱晓静.超临界水冷堆堆芯子通道中熵产行为数值研究[A],2017,B2017004
[44]邱庆刚,权生林,沈胜强.橫管降膜流动过程中液柱对液膜分布的影响分析[A],2017,176041
[45]邱庆刚,权生林,沈胜强.3D Numerical Investigation on Characteristics of Liquid Film Flow Outside a Horizontal-tube[A],Asian Conference on Thermal Sciences 2017,2017,ACTS-P00226
[46]徐维晖,朱晓静,王为术,邱庆刚,崔强.超临界水在垂直上升类矩形通道内传热与阻力特性试验研究[J],中国电机工程学报,2017,37(3):819-825
[47]Wang, Haipeng,Zhang, Bo,Qiu, Qinggang,Xu, Xiang.Flow control on the NREL S809 wind turbine airfoil using vortex generators[J],ENERGY,2017,118:1210-1221
[48]邱庆刚,沈胜强.横管降膜过程中液膜内流动和传热特性分析[A],高等学校工程热物理第二十三届全国学术会议,2017,B2017012
[49]邱庆刚,权生林,沈胜强.Numerical Investigation on Liquid Film Flow and Film Thickness Distribution outside a Horizontal-Tube[A],16th International Conference on Sustainable Energy Technologies,2017,SET2017-343
[50]朱晓静,邱庆刚,权生林,沈胜强.水平管降膜蒸发器中液膜厚度周向分布研究[J],太阳能学报,2016,37(12):3207-3213
[51]Mu L.,Qiu Q.,Chen J.,Yin H.,Li A.,Chi X..Numerical investigation of ash particles deposition and distribution in a refining and chemical wastewater incineration equipment[J],Nature Environment and Pollution Technology,2016,15(1):1-10
[52]李树谦,卢涛,邱庆刚.T型圆管内蒸汽直接接触凝结数值模拟[J],热科学与技术,2016,15(1):33-39
[53]朱晓静,周盛,邱庆刚,沈胜强.标准型定位格架对超临界水在堆芯传热和流动影响的数值研究[J],热科学与技术,2016,15(1):7-12
[54]Wang, Haipeng,Zhang, Bo,Qiu, Qinggang.Numerical study of the effects of wind shear coefficients on the flow characteristics of the near wake of a wind turbine blade[J],PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OFPOWER AND ENERGY,2016,230(1):86-98
[55]邱庆刚,沈胜强.横管外液膜流动特性的三维数值模拟[A],2016年中国工程热物理学会多相流学术年会，广州,2016
[56]邱庆刚,沈胜强.相邻液柱在横管外成膜规律的三维数值模拟-163576[A],2016 年中国工程热物理学会传热传质学术会议，北京,2016
[57]邱庆刚,朱晓静.定位格架对超临界水冷堆堆芯换热的影响-B-2016092[A],全国高校工程热物理学会第二十二届学术会议，哈尔滨,2016
[58]邱庆刚,朱晓静.堆芯高焓值区和低焓值区内定位格架对流体换热的影响-166180[A],2016年中国工程热物理学会多相流学术年会，广州,2016
[59]朱晓静,邱庆刚.阻流片型定位格架对超临界反应堆堆芯流体传热影响分析-166058[A],2016
[60]Qiu, Qinggang,Zhu, Xiaojing,Mu, Lin,Shen, Shengqiang.An investigation on the falling film thickness of sheet flow over a completely wetted horizontal round tube surface[J],DESALINATION AND WATER TREATMENT,2016,57(35):16277-16287
[61]朱晓静,邱庆刚.Numerical Research and Field Synergy Principle Analysis on （ISSNP2016-068）[A],2016
[62]邱庆刚,朱晓静.Numerical analysis of sub-channel local heat transfer in reactor core with grid spacer （ISSNP2016-038）[A],ISSNP2016-The 8th International Symposium on Symbiotic Nuclear Power Systems for 21st Century,2016
[63]邱庆刚,沈胜强.横管外液膜流动特性的三维数值模拟-166096[A],2016年中国工程热物理学会多相流学术年会，广州,2016
[64]朱晓静,邱庆刚.阻流片型定位格架影响下堆芯超临界流体传热分析及场协同分析-163487[A],2016
[65]朱晓静,邱庆刚.定位格架影响下堆芯超临界流体传热特性数值模拟及场协同理论分析- B-2016093[A],2016
[66]Qiu, Qing-gang,Jiang, Wei-guo,Shen, Sheng-qiang,Zhu, Xiao-jing,Mu, Xing-sen.Numerical investigation on characteristics of falling film in horizontal-tube falling film evaporator[J],DESALINATION AND WATER TREATMENT,2015,55(12):3247-3252
[67]邱庆刚,于跃,牟兴森,沈胜强.3FL铝合金换热管脱氧新鲜海水环境下结垢与腐蚀特性实验研究[A],高等教育学会工程热物理专业委员会第二十一届全国学术会议,2015,8
[68]Qiu, Qinggang,Zhu, Xiaojing,Mu, Lin,Shen, Shengqiang.Numerical study of falling film thickness over fully wetted horizontal round tube[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2015,84:893-897
[69]邱庆刚,贾丹丹,朱晓静,尹晓奇,沈胜强.结构参数对离心喷嘴出口液膜厚度的影响[J],江苏大学学报（自然科学版）,2015,36(3):271-275
[70]邱庆刚,沈胜强.Three-dimensional Simulation of Film Distribution outside Horizontal Tubes[A],ICTST2015,2015
[71]邱庆刚,沈胜强.水平椭圆管外流体降膜流动的研究[A],2015年中国工程热物理学会多相流学术会议,2015
[72]邱庆刚,梁刚涛,沈胜强.液滴撞击内凹壁面的三维数值模拟[A],2015,156005
[73]尹洪超,赵亮,邱庆刚.Numerical and experimental investigation on flow of hollow swirl nozzle[A],2015
[74]权生林,邱庆刚,沈胜强.Experimenal Study of Solidification Characteristics of Droplet[A],2015
[75]权生林,邱庆刚,沈胜强.The Enhancement of Heat Dissipation of High Power LED Lamp with Chimney Effect[A],14th International Conference on Sustainable Energy Technologies,2015
[76]郭亚丽,邱庆刚,权生林,沈胜强.Analysis on thermodynamic losses in multi-effect desalination system[A],The International Desalination Association World Congress on Desalination and Water Reuse,2015
[77]邱庆刚,权生林,沈胜强.Numerical investigation of falling film flow behaviour outsidehorizontal-tube bundles[A],Euromed2015,2015
[78]朱晓静,邱庆刚.超临界水在类四边形通道内传热特性实验研究[A],2015
[79]邱庆刚,朱晓静.Numerical investigation of grid spacer effect on drag characteristic of supercritical water cooled reactor core[A],ICTST2015,2015
[80]邱庆刚,朱晓静,权生林,沈胜强.Numerical Study on Characteristics of Falling Film Thickness and Distribution over Horizontal Elliptical Tube[A],Euromed2015,2015
[81]邱庆刚,于跃,牟兴森,沈胜强.3FL铝合金换热管脱氧新鲜海水环境下结垢与腐蚀特性实验研究[A],高等学校工程热物理第二十届全国学术会议,2014,8
[82]邱庆刚,贾莹,贾丹丹,沈胜强.旋转压力式喷嘴干涉的数值模拟[A],高等学校工程热物理第二十届全国学术会议,2014,10
[83]李子建,蒋维国,邱庆刚,沈胜强.异形管外液体降膜流动数值研究[A],高等学校工程热物理第二十届全国学术会议,2014,8
[84]朱晓静,邱庆刚,沈胜强.水平圆管外降膜厚度特性的数值研究[A],中国工程热物理学会-传热传质会议,2014
[85]邱庆刚,沈胜强.水平横管外降膜液体流动型式数值研究[A],中国工程热物理学会2014年度学术年会,2014
[86]邱庆刚,沈胜强.Numerical Investigation on Flow Characteristics of Falling Film outside Horizontal Tubes in MED Evaporator[A],13th International Conference on Sustainable Energy Technologies,2014
[87]邱庆刚,沈胜强.Numerical Investigation on Characteristics of Falling Water Film in Horizontal-tube Falling Film Evaporator[A],Desalination for the Environment: Clean Water and Energy,2014
[88]邱庆刚,朱晓静,沈胜强.定位格架对堆芯中超临界水换热特性影响研究[A],2014年度核反应堆系统设计技术重点实验室学术年会,2014
[89]郭亚丽,邱庆刚,沈胜强.Study of parameters effects on the performance of falling film distribution in MED evaporator[A],DESALINATION FOR THE ENVIRONMENT CLEAN WATER AND ENERGY,2014
[90]Li, Mingqiang,Su, Hang,Qiu, Qinggang,Zhao, Guang,Sun, Yu,Song, Wenjun.A Quaternized Polysulfone Membrane for Zinc-Bromine Redox Flow Battery[J],JOURNAL OF CHEMISTRY,2014,2014
[91]邱庆刚,吕多.水平管外降膜流动液膜厚度数值模拟[J],大连理工大学学报,2013,53(3):359-363
[92]邱庆刚,吕多,贾丹丹.椭圆管外液体降膜流动数值研究[A],高等学校工程热物理第十届全国学术会议,2013,10
[93]邱庆刚,张博,沈胜强.CFD Anaysis of Nozzle Gometry on Injector Performance[A],2013
[94]邱庆刚,沈胜强.百叶窗翅片流动与换热特性的数值研究[A],中国工程热物理学会传热传质学学术会议，2013，重庆，No.133705,2013
[95]邱庆刚,沈胜强.Numerical Simulation of Falling Film Flow Outside Horizontal Tubes[A],FTEC2013-The 8th International Conference on Fluid and Thermal Energy Conversion,Semarang, Indonesia,November 8-11,2013,H010,2013
[96]邱庆刚.Study on Film Thickness in Horizontal Falling Film[A],6th INTERNATIONAL CONFERENCE ON COOLING & HEATING TECHNOLOGIES (ICCHT 2012),Xi’an Jiaotong University, Xi’an, P. R. China, November 9-12, 2012,No. 110,2012
[97]邱庆刚.离心式喷嘴喷淋特性的数值研究[A],高等学校工程热物理第十八届全国学术会议，广州，2012.5.17-21，D-120010,2012
[98]邱庆刚.百叶窗翅片传热与流动特性的数值研究[A],高等学校工程热物理第十八届全国学术会议，广州，2012.5.17-21，B1-20012,2012
[99]邱庆刚,王海鹏,赵亮,沈胜强.楔形肋片内冷通道传热与流动阻力特性[J],航空动力学报,2011,26(12):2648-2654
[100]邱庆刚,刘丽娜,尹晓奇.一种中空离心式喷嘴流场特性的研究[J],热能动力工程,2011,26(5):599-603
[101]邱庆刚,陈金波.管束排列方式及管间距对水平管外液体成膜情况的影响分析[J],热科学与技术,2011,10(2):117-122
[102]邱庆刚,陈金波.水平管降膜蒸发器管外液膜的数值模拟[J],动力工程学报,2011,31(5):357-361,374
[103]刘剑,杨勇,邱庆刚.基于粒子群神经网络的热力站供热负荷预测[A],2011,141-144
[104]邱庆刚,刘丽娜.喷嘴结构对流场性能影响的研究[J],石油化工高等学校学报,2011,24(1):68-72
[105]邱庆刚,赵亮.Numerical Investigation of Liquid Flow Behavior between Horizontal Tubes[A],The 2011 World Congress on Engineering and Technology，Oct 28-30，2011，Shanghai，China,2011
[106]邱庆刚,赵亮.Modeling of freely Falling film Distribution outside horizontal tubes[A],2011
[107]邱庆刚.NUMERICAL INVESTIGATION OF FILM DISTRIBUTION IN HORIZONTAL-TUBE FALLING FILM EVAPORATOR[J],International Journal of Air-Conditioning and Refrigeration (IJACR),2011,19(3):177-183
[108]邱庆刚.水平管外降膜流动特性的CFD研究[A],高等学校工程热物理第十六届全国学术会议,2011
[109]邱庆刚.某旋转压力式喷嘴的模拟计算[A],高等学校工程热物理第十六届全国学术会议,2011
[110]邱庆刚.CFD simulation of Falling Film Flow Characteristics outside a Horizontal Tube[A],2011
[111]邱庆刚.Numerical Prediction of Film Distribution in Horizontal—tube Falling Film[A],5th International Conference on Cooling and Heating Technologies,2010
[112]邱庆刚.改进的遗传算法在换热网络优化中的应用[A],全国高校工程热物理第十六届学术年会,2010
[113]邱庆刚,权生林,赵亮,沈胜强.楔形肋片安放方向对内冷通道换热特性影响[A],中国工程热物理学会传热传质学2009年学术会议,2009,1-4
[114]邱庆刚,沈胜强.矩形肋片导流角度对内冷通道流动与换热特性的影响[J],热科学与技术,2008,7(4):331-336
[115]刘剑,杨勇,邱庆刚.基于粒子群神经网络的热力站供热负荷预测[J],节能,2008,27(6):27-30
[116]邱庆刚,沈胜强.Effect of Helix-alike Fin Height on Flow and Heat Transfer in Internal Cooling Duct[A],4th International Conference on Cooling and Heating Technologies. Jinhae, Korea,2008,481-488
[117]邱庆刚,沈胜强.矩形肋片导流角度对内冷通道流动与换热特性的影响[A],中国教育学会工程热物理专业委员会第十四届全国学术会议,2008
[118]邱庆刚,沈胜强.楔形仿螺旋肋片内冷通道的流动与换热[J],热科学与技术,2006,5(3):206-210
[119]张博,沈胜强,邱庆刚.新型太阳能双喷射制冷系统的理论研究[J],太阳能学报,2006,27(8):782-787
[120]邱庆刚,沈胜强,张博.带有倾斜楔形肋片矩形通道内的流动与换热[J],大连理工大学学报,2006,46(3):345-349