个人简历
教育经历1986.9 1989.7 铁岭县高中 无2000.9 2006.6 大连理工大学 工程热物理 博士1989.9 1993.7 重庆大学 机械工程 学士工作经历2011.12 至今 大连理工大学能源与动力学院 副教授2006.7 2011.12 大连理工大学能源与动力学院 讲师1998.10 2000.6 上海连成泵业大连办事处 工程师1993.7 1998.10 大炼钢厂设计院 工程师专利 一种双层吸液芯无开孔高效冷却涡轮导叶装置 一种热板均温无掺混涡轮叶片冷却装置及方法 一种用于燃烧地沟油的泡沫陶瓷燃烧器 一种带肋片的强化传热电石锅 一种用于电石锅余热回收的搅拌装置及其应用 一种用于电石锅余热回收的隧道窑装置及应用 著作成果 热工基础实验教程 科研项目 掺醇生物柴油混合燃料闪急沸腾微观机理研究, 其他课题, 2018/03/05, 进行 新型能源－一体式可再生燃料电池扩散层微通道内多相多组分传质过程研究, 2009/01/01-2011/07/31, 完成 内燃机中雾化油滴碰壁蒸发瞬时特性研究, 国务院其他部门, 2012/01/01-2013/12/02, 完成 低速过滤燃烧火焰锋面倾斜和热斑的非稳定性和动力学研究, 国家自然科学基金项目, 2011/01/01-2013/12/31, 完成 内燃机中附壁油膜-气泡微尺度两相流及油膜蒸发机理研究, 国家自然科学基金项目, 2013/09/25-2017/12/31, 完成 多能流统一建模与多尺度态势估计, 国家科技部 , 2018/05/18, 进行 科研奖励 科学技术进步奖 科技进步奖 科学技术进步奖 其他奖励 2017年教学质量优良奖 （2018年） 2018优秀教学成果二等奖 （2019年） 2018年教学质量优良奖 （2019年） 2016年教学质量优良奖 （2017年） 2011年度教学质量优良奖 （2012年）
研究领域
1、 燃油喷雾蒸发与混合过程理论及应用 2、 气液两相流体动力学及传热传质3、喷雾冷却理论及工程应用4、多能流系统能量管理及优化"主要研究领域：（1）燃油喷雾蒸发与混合过程理论及工程应用；（2）喷雾冷却理论及工程应用;（3)气液两相流体动力学及传热传质；（4）多能流系统能量管理及优化。"
近期论文
[1]Cai, Chang,Mudawar, Issam,Liu, Hong,Si, Chao.Theoretical Leidenfrost point (LFP) model for sessile droplet[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2020,146 [2]Duan, Huiquan,Jia, Ming,Chang, Yachao,Liu, Hong.Experimental study on the influence of low-temperature combustion (LTC) mode and fuel properties on cyclic variations in a compression-ignition engine[J],FUEL,2019,256 [3]牛腾,尹洪超,冯恩民,刘红.可燃冰在蒸汽动力系统优化中经济性研究[J],大连理工大学学报,2019,59(4):350-358 [4]Liu, Hong,Chen, Han,Cai, Chang,Jia, Ming,Yin, Hongchao.Numerical investigation on the unsteady spray cooling of high temperature steel plate[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2019,143 [5]Xu, Guangfu,Jia, Ming,Li, Yaopeng,Chang, Yachao,Liu, Hong,Wang, Tianyou.Evaluation of variable compression ratio (VCR) and variable valve timing (VVT) strategies in a heavy-duty diesel engine with reactivity controlled compression ignition (RCCI) combustion under a wide load range[J],FUEL,2019,253:114-128 [6]Cao, Jingjie,Jia, Ming,Niu, Bo,Chang, Yachao,Xu, Zhen,Liu, Hong.Establishment of an improved heat transfer model based on an enhanced thermal wall function for internal combustion engines operated under different combustion modes[J],ENERGY CONVERSION AND MANAGEMENT,2019,195:748-759 [7]Zhang, Weilong,Liu, Hong,Liu, Canxu,Jia, Ming,Xi, Xi.Numerical analysis of jet breakup based on a modified compressible two-fluid-LES model[J],FUEL,2019,254 [8]Liu, Hong,Cai, Chang,Xi, Xi,Yan, Yan'an,Jia, Ming.A novel model for the bubble growth in the cavitation region of an injector nozzle[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2018,119:128-138 [9]Liu, Hong,Yan, Yan'an,Jia, Ming,Zhang, Yanzhi,Xie, Maozhao,Yin, Hongchao.An analytical solution for wall film heating and evaporation[J],INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER,2017,87:125-131 [10]Wang, Ying,Liu, Hong,Ke, Xichun,Shen, Zhenxing.Kinetic modeling study of homogeneous ignition of dimethyl ether/hydrogen and dimethyl ether/methane[J],APPLIED THERMAL ENGINEERING,2017,119:373-386 [11]Zhang, Yanzhi,Jia, Ming,Duan, Huiquan,Wang, Pengfei,Wang, Jianxiang,Liu, Hong,Xie, Maozhao.Experimental and Numerical Study of the Liquid Film Separation and Atomization at Expanding Corners[A],SAE World Congress Experience, WCX 2017,2017,2017-March(March) [12]Xi, Xi,Liu, Hong,Jia, Ming,Xie, Maozhao,Yin, Hongchao.A new flash boiling model for single droplet[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2017,107:1129-1137 [13]Zhang, Yanzhi,Jia, Ming,Yi, Ping,Liu, Hong,Xie, Maozhao.An efficient liquid film vaporization model for multi-component fuels considering thermal and mass diffusions[J],APPLIED THERMAL ENGINEERING,2017,112:534-548 [14]Yan, Peiliang,Liu, Hong,Cai, Chang,Gao, Jiuliang,Yin, Hongchao.Numerical simulation on multiphase spray cooling[A],1ST INTERNATIONAL GLOBAL ON RENEWABLE ENERGY AND DEVELOPMENT (IGRED2017),2017,100(1) [15]贾明,刘红,解茂昭.Energy and Exergy Analysis of Various Engine Combustion Regimes under a Wide Range of Loads and Speeds[A],2017 [16]刘红.内燃机喷嘴内气穴耦合近场喷雾研究[A],2017 [17]闫燕安,刘红,奚溪,殷宝振.附壁油膜蒸发模型[J],燃烧科学与技术,2016,22(6):527-530 [18]刘红,贾明,白敏丽,刘宏升,刘戈,吕继组.双语传热学在高校中的教学探讨与实践[J],教育现代化,2016,38:178-179 [19]Wang, Ying,Liu, Hong,Huang, Zhiyong,Ke, Xichun.Particulate Size Distribution from Diesel-Dimethyl Ether Dual Fuel Premixed Compression Ignition Combustion Engine[J],JOURNAL OF ENERGY ENGINEERING,2016,142(4) [20]Wang, Ying,Liu, Hong,Lee, Chia-Fon F..Particulate matter emission characteristics of diesel engines with biodiesel or biodiesel blending: A review[J],RENEWABLE & SUSTAINABLE ENERGY REVIEWS,2016,64:569-581 [21]常亚超,贾明,范玮卫,李耀鹏,刘红,解茂昭.解耦法:一个构建简化或骨架机理的有效方法[J],物理化学学报,2016,32(9):2209-2215 [22]Liu, Hong,Yan, Yan'an,Jia, Ming,Xie, Maozhao,Lee, Chia-fon F..Three-dimensional numerical investigation on wall film formation and evaporation in port fuel injection engines[J],NUMERICAL HEAT TRANSFER PART A-APPLICATIONS,2016,69(12):1405-1422 [23]刘红,闫燕安,尹洪超,贾明,解茂昭.内燃机附壁油膜蒸发的一维解析[J],哈尔滨工程大学学报,2016,37(5):690-695 [24]Zhang, Yanzhi,Jia, Ming,Liu, Hong,Xie, Maozhao.Development of an improved liquid film model for spray/wall interaction under engine-relevant conditions[J],INTERNATIONAL JOURNAL OF MULTIPHASE FLOW,2016,79:74-87 [25]汪映,黄智勇,柯希春,刘红.液化石油气对二甲醚-柴油双燃料发动机燃烧和排放特性的影响[J],西安交通大学学报,2016,50(5):19-23,80 [26]Wang, Ying,Liu, Hong,Huang, Zhiyong,Liu, Zhensheng.Study on combustion and emission of a dimethyl ether-diesel dual-fuel premixed charge compression ignition combustion engine with LPG (liquefied petroleum gas) as ignition inhibitor[J],ENERGY,2016,96:278-285 [27]刘红.喷嘴内空化现象研究[A],2016 [28]刘红.壁面条件对异质成核的影响研究[A],2016 [29]Liu, Hong,Yin, Hongchao,Zhang, Ming,Xie, Maozhao,Xi, Xi.Numerical simulation of particle motion and heat transfer in a rotary kiln[J],POWDER TECHNOLOGY,2016,287:239-247 [30]刘红,闫燕安,尹洪超.内燃机附壁油膜蒸发的一维解析研究内燃机附壁油膜蒸发的一维解析研究[J],哈尔滨工程大学学报,2016,37(5):690-695 [31]贾明,刘红,解茂昭.Energy and exergy analysis of various engine combustion regimes under a wide range of loads and speeds[A],2016,1(1):1-5 [32]刘红,尹洪超,贾明.Homogeneous nucleation and flash boiling model of single droplet[A],2016 [33]刘红.Particulate matter emission characteristics of diesel engines with biodiesel or biodiesel blending[J],Renewable and Sustainable Energy Reviews,2016,64(5):569-581 [34]刘红.Study of influencing factors of cavitation inside nozzle[A],2016 [35]刘红,尹洪超.二甲醚液滴闪急沸腾过程的数值计算[A],2016 [36]刘红,尹洪超.喷雾冷却中壁面换热特性研究[A],2016 [37]刘红.双组分附壁油膜蒸发模型研究[A],2016 [38]Yan, Yan'an,Liu, Hong,Jia, Ming,Xie, Maozhao,Yin, Hongchao.A one-dimensional unsteady wall film evaporation model[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2015,88:138-148 [39]刘红.油膜蒸发模型研究[A],2015,154125- [40]刘红.油膜蒸发特性的实验研究[A],2015,154345- [41]Zhang, Yanzhi,Jia, Ming,Liu, Hong,Xie, Maozhao,Wang, Tianyou.INVESTIGATION OF THE CHARACTERISTICS OF FUEL ADHESION FORMED BY SPRAY/WALL INTERACTION UNDER DIESEL PREMIXED CHARGE COMPRESSION IGNITION (PCCI) RELEVANT CONDITIONS[J],ATOMIZATION AND SPRAYS,2015,25(11):933-968 [42]Liu, Hong,Lee, Chia-Fon.Numerical study on wall film formation and evaporation[A],SAE 2014 World Congress and Exhibition,2014,1 [43]Yin, Hongchao,Zhang, Ming,Liu, Hong.Numerical simulation of three-dimensional unsteady granular flows in rotary kiln[J],POWDER TECHNOLOGY,2014,253:138-145 [44]刘红.内燃机附壁油膜蒸发数值模拟[A],2014 [45]Zhang, Yanzhi,Jia, Ming,Liu, Hong,Xie, Maozhao,Wang, Tianyou,Zhou, Lei.DEVELOPMENT OF A NEW SPRAY/WALL INTERACTION MODEL FOR DIESEL SPRAY UNDER PCCI-ENGINE RELEVANT CONDITIONS[J],ATOMIZATION AND SPRAYS,2014,24(1):41-80 [46]尹洪超,沈春艳,刘红,李德付.回转窑冷态射流和气固两相流数学计算[J],硅酸盐学报,2013,41(11):1527-1533 [47]刘红,贾小娟,解茂昭,冯倩.双液滴同时垂直撞击液膜数值研究[J],大连理工大学学报,2013,53(5):659-665 [48]李德付,尹洪超,张明,刘红,解茂昭.回转窑横截面颗粒流动特性数值模拟研究[J],哈尔滨工程大学学报,2013,34(6):703-708 [49]Liu, Hong,Xie, Mao-Zhao,Liu, Hong-Sheng,Wang, De-Qing.NUMERICAL STUDY ON BUBBLE RISING BEHAVIOR IN A RECIPROCALLY STIRRED MOLTEN METAL FLOW[J],REVIEWS ON ADVANCED MATERIALS SCIENCE,2013,33(2):195-201 [50]陈仲山,解茂昭,刘宏升,贾明,刘红.大孔穴多孔介质内湍动特性研究[J],工程热物理学报,2013,34(1):189-193 [51]Li D.,Xie M.,Shen C.,Yin H.,Liu H..Numerical simulation of gas-solid two-phase flow for four-channels pulverized swirling burner[J],Sensors and Transducers,2013,21(SPEC.ISS.5):199-204 [52]刘红.附壁油膜形成及蒸发的数值模拟研究[A],工程热物理学会燃烧分会,2013 [53]尹洪超,刘红.回转窑冷态射流和气固两项流数学计算[J],硅酸盐学报,2013,41(11):1-9 [54]陈仲山,刘宏升,解茂昭,贾明,刘红.泡沫陶瓷内热输运现象的数值模拟研究[J],工程热物理学报,2013,34(12):2396-2400 [55]刘红,王淑春,解茂昭,贾小娟,汪永丽.双液滴垂直碰撞等温壁面过程分析[J],江苏大学学报（自然科学版）,2012,33(3):274-277 [56]史玉凤,孙文策,刘宏升,刘红,吴丹.太阳池底部加设多孔介质实验与模拟研究[J],大连理工大学学报,2012,52(1):16-22 [57]刘红,解茂昭,贾明.单液滴撞击薄液膜产生二次雾化过程数值研究[J],燃烧科学与技术,2012,18(1):1-6 [58]刘红,解茂昭,刘宏升.Numerical study on bubble-melt two-phase flows in the production process of aluminum foams[J],Materials Science Forum,2012,704:796-803 [59]SHI Jun-rui,王启民,史俊瑞,LIU Hong,刘红,LI Jun,李军,LI Gang,李刚,WANG Qi-min.往复流多孔介质燃烧换热器热量提取的数值研究[A],华西冶金论坛第26届(厦门)会议——全国能源与工业炉热工学术研讨会,2011,33-37 [60]史玉凤,孙文策,刘红.多孔介质对太阳池传热传质影响的研究[J],太阳能学报,2011,32(10):1475-1480 [61]Liu, Hong,Xie, Maozhao,Li, Ke,Wang, Deqing.Three-dimensional CFD simulation of bubble-melt two-phase flow with air injecting and melt stirring[J],INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW,2011,32(5):1057-1067 [62]刘红,解茂昭,贾明,刘宏升,王淑春.单液滴碰撞不同尺寸等温壁面过程[J],江苏大学学报（自然科学版）,2011,32(5):533-539 [63]刘红,解茂昭,刘宏升,刘戈,王淑春.单液滴在多孔介质内碰壁过程的数值模拟[J],燃烧科学与技术,2011,17(4):287-294 [64]Jia, Ming,Xie, Maozhao,Liu, Hong,Lam, Wei-Haur,Wang, Tianyou.Numerical simulation of cavitation in the conical-spray nozzle for diesel premixed charge compression ignition engines[J],FUEL,2011,90(8):2652-2661 [65]Shi, Yufeng,Yin, Fang,Shi, Lihua,Sun, Wence,Li, Nan,Liu, Hong.Effects of porous media on thermal and salt diffusion of solar pond[J],APPLIED ENERGY,2011,88(7):2445-2453 [66]刘红,解茂昭,于静,王德庆.金属熔池往复搅拌流场中气泡运动特性数值模拟研究[J],大连理工大学学报,2011,51(3):331-337 [67]李科,解茂昭,刘红,李海广,武文斐.节点在液态铝合金泡沫析液过程中的耗散作用分析[J],四川大学学报. 工程科学版,2011,43(1):226 [68]贾明,解茂昭,刘红,林伟豪.Numerical simulation of cavitation in the conical-spray nozzle for diesel premixed charge compression ignition engines[A],Fuel,2011,90(8):2652-2661 [69]刘红,白敏丽,陈石.传热学教学方法探讨[J],中国教育研究论坛,2011,12(2):48-49 [70]刘红,解茂昭,贾明,刘宏升.单液滴碰撞不同尺寸等温壁面过程的研究[J],江苏大学学报,2011,32(5):533-539 [71]Shi, Jun-Rui,Xie, Mao-Zhao,Liu, Hong,Liu, Hong-Sheng,Zhang, Xue-Song,Xu, You-Ning.Two-dimensional numerical study of combustion and heat transfer in porous media combustor-heater[J],PROCEEDINGS OF THE COMBUSTION INSTITUTE,2011,33(2):3309-3316 [72]贾明,解茂昭,刘红,王天友.伞喷喷嘴内空化现象的数值模拟[J],内燃机学报,2011,29(3):213-220 [73]史玉凤,刘红,孙文策.多孔介质有效导热系数的实验与模拟[J],四川大学学报. 工程科学版,2011,43(3):198-203 [74]于静,刘红,解茂昭,王德庆.往复搅拌流场中气体射流两相流数值研究[J],工程热物理学报,2011,32(10):1699-1702 [75]杜礼明,刘红,韩树林,张军,孙丽萍.机车用轴流式风机性能测试与数值分析[J],大连交通大学学报,2010,31(6):15-19 [76]Liu, Hong,Xie, Mao-zhao,Yin, Hong-chao,Wang, De-qing.VOF simulations of gas bubbles motion in a reciprocally stirred flow[A],International Conference on Frontiers of Manufacturing and DesignScience (ICFMD2010),2010,44-47:2494-+ [77]Liu, Hong,Xie, Mao-zhao,Wang, Suchun,Jia, Ming.Numerical study on impingement of a droplet upon a liquid film[A],International Conference on Frontiers of Manufacturing and DesignScience (ICFMD2010),2010,44-47:2499-2503 [78]Liu, Hong,Xie, Mao-Zhao,Shi, Jun-Rui,Liu, Hong-Sheng.Numerical study on bubble-melt two-phase flows in the production process of aluminum foams[A],6th International Conference on Physical and Numerical Simulation ofMaterials Processing (ICPNS),2010,704-705:796-+ [79]贾明,解茂昭,刘红,王天友.伞喷喷嘴内空化现象的数值模拟研究[A],中国内燃机学会第八届学术年会,2010,378-383 [80]解茂昭,刘红.Two-dimensional study of combustion and heat transfer in porous media combustor-heater[A],2010,33(2):3309-3316 [81]贾明,解茂昭,刘红.加速详细反应动力学计算的ISAT改进方法的研究[J],工程热物理学报,2010,31(6):1056-1060 [82]刘红,解茂昭,贾明.Numerical simulation on dynamics of a droplet upon a liquid film[A],14th Annual Conference on Liquid Atomization and Spray Systems –Asia,2010 [83]李科,解茂昭,刘红,武文斐.泡沫铝制备中析液过程的微观-宏观数值研究[J],四川大学学报. 工程科学版,2010,42(1):126-132 [84]贾明,解茂昭,周磊,刘红.加速详细反应动力学计算的ISAT改进方法研究[J],工程热物理学报,2010,31(6):1057-1060 [85]李科,解茂昭,刘红.基于微观方法对液态铝泡沫宏观析液过程的数值模拟研究[J],应用数学和力学,2009,30(12):1453-1462 [86]Li, Ke,Xie, Mao-zhao,Liu, Hong.Numerical study of macroscopical drainage process in fabricating foamed aluminum using microscopical method[J],APPLIED MATHEMATICS AND MECHANICS-ENGLISH EDITION,2009,30(12):1547-1558 [87]刘红,解茂昭,尹洪超,王德庆.泡沫铝制备过程气泡生成尺寸的数值模拟研究[A],2009全国功能材料科技与产业高层论坛,2009,Vol.40:232-236 [88]Li, Ke,Xie, Mao-Zhao,Wang, Hua,Liu, Hong.Computational study on cell structure evolution of random liquid and metal-melt foams[J],APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING,2009,97(3):595-605 [89]刘红,解茂昭,尹洪超,王德庆.熔体吹气发泡法制备泡沫铝的准三维数值模拟[J],辽宁工程技术大学学报（自然科学版）,2009,28(5):770-773 [90]贾明,解茂昭,周磊,刘红.加速详细反应动力学计算的ISAT改进方法的研究[A],中国工程热物理学会燃烧学2009年学术会议,2009,1-11 [91]史俊瑞,刘红,李军,李刚,王启民.往复流多孔介质燃烧换热器热量提取的数值研究[J],热科学与技术,2009,8(3):272-276 [92]王华,孙文策,邹家宁,刘红.在盐梯度太阳池储热层添加锅炉渣的实验和理论研究[J],太阳能学报,2009,30(7):905-910 [93]李科,解茂昭,刘红,武文斐,王德庆.泡沫铝合金析液与凝固过程数值模拟研究[J],大连理工大学学报,2009,49(4):506-511 [94]吴熙峰,王德庆,刘红.泡沫铝发泡过程的模拟研究[J],大连交通大学学报,2009,30(3):60-65 [95]Li, K.,Xie, M. Z.,Liu, H..Numerical simulation of bubble size distribution of aluminium foams in liquid state[J],MATERIALS SCIENCE AND TECHNOLOGY,2009,25(6):777-783 [96]李科,解茂昭,刘红.单条Plateau边界中微流动分析及其在液态泡沫铝析液研究中的应用[J],大连海事大学学报,2009,35(2):141-144 [97]Shi, Jun-Rui,Xie, Mao-Zhao,Li, Gang,Liu, Hong,Liu, Ji-Tang,Li, Hong-Tao.Approximate solutions of lean premixed combustion in porous media with reciprocating flow[J],INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER,2009,52(3-4):702-708 [98]李科,解茂昭,刘红.三维液态铝合金泡沫体演化过程中泡径分布的研究[J],四川大学学报. 工程科学版,2009,41(1):106-111 [99]刘红,解茂昭,尹洪超.泡沫铝制备过程气泡生成尺寸的数值模拟研究[J],功能材料（增刊）,2009,40(12):212-216 [100]Xie, Mao-Zhao,Shi, Jun-Rui,Deng, Yang-Bo,Liu, Hong,Zhou, Lei,Xu, You-Ning.Experimental and numerical investigation on performance of a porous medium burner with reciprocating flow[J],FUEL,2009,88(1):206-213
