刘学术
近期热点
资料介绍
个人简历
教育经历2009.4 - 2012.3 东京大学 精密机械工程 博士 2000.9 - 2003.4 大连理工大学 车辆工程 硕士 1996.9 - 2000.7 大连理工大学 机械制造及其自动化 学士 工作经历2014.12 - 至今 大连理工大学 副教授 2006.5 - 2014.12 大连理工大学 讲师 2003.4 - 2006.5 大连理工大学 助教 专利 一种飞机发动机安装用多轴调姿平台 天线罩加压套装柔性夹具设计管理系统--软件著作权 车身曲面智能重构系统-软件著作权 复合材料加工工具与工艺数据库软件--软件著作权 科研项目 面向复材结构件装配不贴合区域的高质量装配方法研究, 企事业单位委托科技项目, 2018/11/24-2020/12/02, 进行 大面积薄壁试验件应力应变有限元分析及试验, 企事业单位委托科技项目, 2018/12/07-2019/02/28, 进行 大型无人机尾翼结构数字化装配技术研究-测量系统与虚拟装配技术研发, 企事业单位委托科技项目, 2019/02/01-2019/12/31, 进行 面向薄壁不规则件雕铣的在机测量轨迹规划与刀轨补偿软件系统, 企事业单位委托科技项目, 2018/05/23-2019/05/01, 进行 制孔缺陷对碳纤维复合材料承力构件连接力学性能的影响与评估, 主管部门科技项目, 2013/12/03-2015/12/03, 完成 环槽铆钉铆接工艺及拉脱试验、检测, 企事业单位委托科技项目, 2018/12/05-2019/01/30, 完成 授课信息 弹性力学与有限元方法 /2019-2020 /春学期 /32课时 /2.0学分 /1040440183 弹性力学与有限元方法 /2019-2020 /春学期 /32课时 /2.0学分 /1040440183 弹性力学与有限元方法 /2018-2019 /春学期 /32课时 /2.0学分 /1040440183 弹性力学与有限元方法 /2017-2018 /春学期 /32课时 /2.0学分 /1040440181研究领域
研究方向高性能复合材料制件设计制造复杂曲面建模与结构分析""近期论文
[1]Bao Yong-jie,Wang Yi-qi,Gao Hang,Liu Xue-shu,Zhang Yi-ni.Investigation on temperature field of unidirectional carbon fiber/epoxy composites during drilling process[J],JOURNAL OF CENTRAL SOUTH UNIVERSITY,2019,26(10):2717-2728 [2]Liu, Xueshu,Li, Jinlei,Lei, Jianhua,Wang, Qi,Gao, Qian.Study on Cure Deformation of Metal/CFRP Laminated Composites[A],2019,616(1) [3]Chang, Junhao,Yang, Yuxing,Liu, Xueshu,Gao, Hang,Wang, Yiqi.A mixed shimming method in eliminating the gaps during the assembly process of the complex structures[A],2019,493(1) [4]Zeng, Xiangqian,Wang, Yi-Qi,Liu, Xueshu,Bao, Yongjie,Gao, Hang.A numerical model on compressive behavior of CFRP laminate with a designed delamination[A],2017,2017-August [5]Yang, Yuxing,Wang, Yi-Qi,Liu, Xueshu,Bao, Yongjie,Gao, Hang.A stiffness model for unidirectional composite bolted joints[A],2017,2017-August [6]Yang, Yuxing,Wang, Yi-Qi,Liu, Xueshu,Gao, Hang,Bao, Yongjie.The effect of shimming material on flexural behavior for composite joints with assembly gap[J],COMPOSITE STRUCTURES,2019,209:375-382 [7]李汝鹏,陈磊,刘学术,曾祥钱,高航.基于渐进损伤理论的复合材料开孔拉伸失效分析[J],航空材料学报,2018,38(5):138-146 [8]Wang, Y. Q.,Cheng, P.,Liu, X. S.,Bao, Y. J.,Gao, H..Study on a Cracked Single-Layer 2D Woven Composite Plate: Fracture Mode and Damage Analysis[J],STRENGTH OF MATERIALS,2018,50(5):800-806 [9]Yang, Yuxing,Liu, Xueshu,Wang, Yi-Qi,Gao, Hang,Bao, Yongjie,Li, Rupeng.An enhanced spring-mass model for stiffness prediction in single-lap composite joints with considering assembly gap and gap shimming[J],COMPOSITE STRUCTURES,2018,187:18-26 [10]Liu, Xueshu,Chang, Junhao,Yang, Yuxing,Wang, Yiqi,Bao, Yongjie,Gao, Hang.Evaluation of Assembly Gap from 3D Laser Measurements via FEA Simulation[J],INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING,2018 [11]Liu, Xueshu,Yang, Yuxing,Huang, Li,Zhang, Ping,Gao, Hang.Numerical Analysis of the Influences of Geometrical Deviation on Delamination in Composite Laminates around the Countersunk Hole[J],INTERNATIONAL JOURNAL OF AEROSPACE ENGINEERING,2018,2018 [12]Li, Rupeng,Xiao, Ruiheng,Ge, Ende,Gao, Hang,Bao, Yongjie,Liu, Xueshu.Effects of hole perpendicularity error on load distribution in single-lap double-bolt composite joints[J],Engineering Transactions,2018,66(1):3-19 [13]高航,曾祥钱,刘学术,王一奇,杨宇星,丛茜.大型复合材料构件连接装配二次损伤及抑制策略[J],航空制造技术,2017,22:28-35 [14]刘学术,杨宇星,鲍永杰,高航,李汝鹏.垂直度误差影响复合材料层合板层间应力分析[J],机械科学与技术,2017,37(1):138-147 [15]Yang, Yuxing,Liu, Xueshu,Wang, Yi-Qi,Gao, Hang,Li, Rupeng,Bao, Yongjie.A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending[J],COMPOSITES SCIENCE AND TECHNOLOGY,2017,151:85-93 [16]王一奇,刘学术,鲍永杰,高航.A stiffness model for unidirectional composite bolted joints[A],2017 [17]王一奇,刘学术,鲍永杰,刘巍,高航.The Development of Bearing Response on the Single-lap Bolted Composite Joints by Shimming Method[A],20th International Conference on Composite Structures,2017 [18]王一奇,刘学术,高航.A progressive damage model for composites with considering prediction of damage evolution stages[A],2017 [19]Liu, Xueshu,Yang, Yuxing,Gao, Hang,Bao, Yongjie,Li, Rupeng,Chen, Lei.Effects of hole-perpendicularity error on joint stiffness of single-lap double-bolt composite joints[J],Engineering Transactions,2017,65(2):289-305 [20]Liu, Xueshu,Yang, Yuxing,Wang, Yiqi,Bao, Yongjie,Gao, Hang.Effects of Hole Perpendicularity Error on Mechanical Performance of Single-Lap Double-Bolt Composite Joints[J],INTERNATIONAL JOURNAL OF POLYMER SCIENCE,2017 [21]Liu, Xueshu,Huang, Li,Xu, Maoqing,Zhang, Zhipeng.Influence of Different Modeling Strategies for CFRP on Finite Element Simulation Results[A],International Symposium on Materials Application and Engineering (SMAE),2016,67 [22]Liu, Xueshu,Gao, Hang,Bao, Yongjie,Wang, Yiqi,Li, Rupeng,Chen, Lei.Experimental investigation on the effect of bolt-hole perpendicularity error on joint strength[A],17th European Conference on Composite Materials, ECCM 2016,2016 [23]高航,王建,杨宇星,刘学术,陈磊,李汝鹏.垂直度误差对复合材料单钉连接性能的影响[J],航空学报,2016,38(2):280-288 [24]王一奇,刘学术,鲍永杰,高航.The Shimming Effects on Bearing Response of the Single-lap Bolted Composite Joints[A],2016 [25]Liu, Xueshu,Chen, Fei.Defects Characterization in CFRP Using X-ray Computed Tomography[J],POLYMERS & POLYMER COMPOSITES,2016,24(2):149-154 [26]刘学术,陈霏.A review of void formation and its effects on mechanical performance of carbon fiber reinforced plastics[J],Engineering Transactions,2016,64(1):33-51 [27]Liu, Xueshu.Functional Surface Reconstruction from Unorganized Noisy Point Clouds[J],Computer-Aided Design and Applications,2015,12(3):366-372 [28]刘学术,高航,鲍永杰.The effect of perpendicularity error on stress concentration for carbon fiber reinforced plastic[A],International Conference on Composite Material,2015 [29]Liu X..A variant of difference of normals operator for feature point detection from point cloud[J],ICIC Express Letters,2015,9(5):1399-1404 [30]刘学术.基于兴趣驱动的三维造型技术教学改革[J],实验室科学,2014,17(3):107-109 [31]Liu X.,Jin C..Feature line extraction from unorganized noisy point clouds[J],Journal of Computational Information Systems,2014,10(8):3503-3510 [32]Liu X.,Suzuki H..An example based approach to consistent mesh segmentation[J],ICIC Express Letters,2013,7(12):3393-3400 [33]Liu X..A new approach to model registration[J],Journal of Computational Information Systems,2013,9(22):9031-9038 [34]刘学术.一种基于形状描述的模型配准方法[J],计算机应用研究,2013,30(11):3492-3494 [35]Liu X.,Suzuki H.,Ohtake Y..A new shape descriptor for local shape comparison[J],Journal of Information and Computational Science,2013,10(13):3981-3989 [36]Liu, Xueshu.Competing front for directed surface extraction from CT images[J],Applied Mechanics and Materials,2012,195-196:534-538 [37]刘学术.Level sets based directed surface extraction[J],International Journal of Image, Graphics and Signal Processing,2011,3(3):25-32 [38]Liu X.,Suzuki H.,Ohtake Y..Medical fixture design with CT images[J],Computer-Aided Design and Applications,2011,8(3):383-394 [39]Liu X..A novel speed function for segmentation of image with gaps[A],2010 International Conference on Biomedical Engineering and Computer Science, ICBECS 2010,2010 [40]Liu, Xueshu.Method for Segmentation of Image with Gaps[A],International Symposium on Image Analysis and Signal Processing,2010,101-104 相关热点
最新收录
- Sien小慧君 05-22
- 罗杰叔叔(Uncle Roger) 05-22
- 悉尼妹(Sydney Sweeney) 05-22
- 玩具砖家 05-19
- 行走的大大大羊腿 05-19
- 梦飞大大 05-19
- 晏安anan 05-19
- 恰饭DZZ 05-19
- 爱玩具的大成 05-19
- 爱拍照的玉老师 05-19