个人简历
教育经历1989.9 1992.7 江苏省沭阳县中学 无2001.10 2004.9 日本广岛大学 结构工程 博士1999.4 2001.9 大连理工大学 船舶工程 博士1996.9 1999.3 大连理工大学 船舶工程 硕士1992.9 1996.7 大连理工大学 船舶工程 学士工作经历2004.10 至今 大连理工大学船舶工程学院 教师专利 一种多立柱桁架式平台 一种张力系泊式水中生产系统及其安装方法 一种基于顶张紧式立管的应力接头 一种超深海水下立管支撑装置 一种极深水海洋油气田工程开发系统 一种张力系泊式水中钻井系统 科研项目 平台结构安全控制技术, 国务院其他部门, 2016/03/01, 进行 LNG-FSRU泵塔结构强度分析及振动分析技术开发, 企事业单位委托科技项目, 2015/11/26-2016/10/31, 完成 面向“卓越工程师”培养的本硕贯通全日制专业学位工程硕士研究生培养模式创新与实践, 其他 , 2015/08/07-2017/03/31, 进行 节能型大型远洋拖网加工船船型开发协作, 国家“863”项目 , 2013/12/01, 完成 S-N curve Selection Based on Finite Element Method, 国际合作项目, 2009/04/01, 完成 气压沉箱人舱段物料舱段有限元强度算, 企事业单位委托科技项目, 2006/05/08-2007/05/08, 完成 授课信息 船舶与海洋工程结构有限元分析 /2019-2020 /春学期 /32课时 /2.0学分 /1040240090 船舶与海洋工程结构强度评估理论与方法 /2019-2020 /春学期 /2.0学分 /2040240103 船舶与海洋工程结构有限元分析 /2019-2020 /春学期 /32课时 /2.0学分 /1040240090 船舶与海洋工程结构强度评估理论与方法 /2019-2020 /春学期 /32课时 /2.0学分 /2040240103 船舶与海洋工程结构强度评估理论与方法 /2018-2019 /春学期 /32课时 /2.0学分 /2040240103 船舶与海洋工程结构强度评估理论与方法 /2018-2019 /春学期 /32课时 /2.0学分 /2040240103 科研奖励 国家科学技术进步奖 其他奖励 校级优秀教学成果二等奖 （2013年） 大连理工大学教学质量优秀奖 （2008年）
研究领域
船舶与海洋工程结构安全理论与评估船舶与海洋工程结构疲劳与断裂机理与方法船舶与海洋工程结构健康监测方法"研究领域 船舶与海洋工程结构强度安全"
近期论文
[1]Dong, Leilei,Qu, Zixin,Zhan, Qi,Huang, Yi,Liu, Gang.A general model to predict torsion and curvature increments of tensile armors in unbonded flexible pipes[J],MARINE STRUCTURES,2019,67 [2]高明星,陈志颖,刘刚,黄一.OPTIMIZED DESIGN OF CRASHWORTHINESS OF FPSO SIDE STRUCTURE BASED ON BP-GA HYBRID ALGORITHM[A],3rd International Conference on Safety & Reliability of Ships, Offshore & Subsea Structures,2018 [3]陈志颖,高明星,刘刚,黄一.OPTIMIZED DESIGN OF ANTI-EXPLOSION PERFORMANCE OF FPSO DECK STRUCTURES UNDER AIR EXPLOSION[A],3rd International Conference on Safety & Reliability of Ships, Offshore & Subsea Structures,2018 [4]侯俊祥,刘刚,黄一.Creep Life Calculation Method Considering Compression Microcrack Closure Effect[A],TEAM 2018,2018,153-162 [5]侯俊祥,刘刚,黄一.考虑拉压机理不同的蠕变损伤计算方法研究[A],中国钢结构协会海洋钢结构分会学术会议,2018,96-105 [6]Dong, Leilei,Zhang, Qi,Huang, Yi,Liu, Gang,Li, Zhiyuan.END FITTING EFFECT ON STRESS EVALUATION OF TENSILE ARMORS IN UNBONDED FLEXIBLE PIPES UNDER AXIAL TENSION[A],36th ASME International Conference on Ocean, Offshore and Arctic Engineering,2017,5A-2017 [7]Liu, Gang,Huang, Yi,Zhang, Qi,Li, Zhiyuan,Chen, Jingjie,Dong, Leilei.FATIGUE DAMAGE ESTIMATION OF WELDED JOINTS CONSIDERING MECHANOCHEMICAL INTERACTION[A],36th ASME International Conference on Ocean, Offshore and Arctic Engineering,2017,3A-2017 [8]Dong, Leilei,Zhang, Qi,Huang, Yi,Liu, Gang.Slip and stress of tensile armors in unbonded flexible pipes close to end fitting considering an exponentially decaying curvature distribution[J],MARINE STRUCTURES,2017,51:110-133 [9]粟京,赵晓玲,刘刚.一种新的海洋平台管节点应力评估方法[J],船舶力学,2016,20(11):1449-1461 [10]Dong, Leilei,Huang, Yi,Dong, Guohai,Zhang, Qi,Liu, Gang.The tensile armour behaviour of unbonded flexible pipes close to end fittings under axial tension[J],SHIPS AND OFFSHORE STRUCTURES,2016,11(5):445-460 [11]Yang, Shuo,Yang, Hongqi,Liu, Gang,Huang, Yi,Wang, Lidong.Approach for fatigue damage assessment of welded structure considering coupling effect between stress and corrosion[J],INTERNATIONAL JOURNAL OF FATIGUE,2016,88:88-95 [12]Zhang, Yan,Huang, Yi,Zhang, Qi,Liu, Gang.Ultimate strength of hull structural plate with pitting corrosion damnification under combined loading[J],OCEAN ENGINEERING,2016,116:273-285 [13]刘刚,黄一.附加质量对LNG泵塔固有频率的影响[A],2016,1(1):1-8 [14]刘刚,黄一.D36钢在海水中的腐蚀疲劳裂纹扩展速率新模型[A],2016,1(1):1-6 [15]刘刚,黄一.New parametric equations for SCF of tubular K-joints based on ZPSS approach[A],2016,1(1):1-10 [16]Liu, Gang,Zhao, Xiaoling,Huang, Yi.Prediction of stress distribution along the intersection of tubular T-joints by a novel structural stress approach[J],INTERNATIONAL JOURNAL OF FATIGUE,2015,80:216-230 [17]刘刚,赵晓玲,黄一.一种新的海洋平台管节点应力评估方法[A],2015年船舶与海洋结构学术会议暨中国钢结构协会海洋钢结构分会成立三十周年纪念学术会议,2015,191-201 [18]Dong, Leilei,Huang, Yi,Dong, Guohai,Zhang, Qi,Liu, Gang.Bending behavior modeling of unbonded flexible pipes considering tangential compliance of interlayer contact interfaces and shear deformations[J],MARINE STRUCTURES,2015,42:154-174 [19]王敏,刘刚,黄一.用扩展有限元方法来分析含裂纹板时剪切闭锁问题消除[J],船舶力学,2015,19(1):126-133 [20]粟京,刘刚,孙佳君.海洋系泊链钢22MnCrNiMo 腐蚀磨损试验与数值分析研究[J],计算力学学报,2015,32(1):113-117 [21]刘刚,刘起成,孙佳君,黄一.锚链扭转状态下的力学响应分析[J],船舶力学,2014,18(12):1472-1481 [22]刘刚,刘英芳,黄一.焊接结构多轴疲劳寿命预测结构应力法[J],船舶力学,2014,18(10):1220-1227 [23]黄如旭,刘刚,黄进浩.等效热点应力法结合临界面法评估焊接接头多轴疲劳强度研究[J],船海工程,2014,4:38-42,46 [24]万正权,卞如冈,刘刚.结构强度学组活动简介及国内研究进展[A],中国造船工程学会船舶力学学术委员会第八次全体会议,2014,77-82 [25]黄一,刘刚.海洋工程结构力学研究进展[A],中国造船工程学会船舶力学学术委员会第八次全体会议,2014,86-92 [26]孙佳君,刘刚,黄一.海洋系泊链钢磨蚀损伤规律研究[A],中国造船工程学会船舶力学学术委员会第八次全体会议,2014,230-238 [27]杨硕,黄一,刘刚.考虑腐蚀和应力耦合作用的疲劳寿命评估方法[A],中国造船工程学会船舶力学学术委员会第八次全体会议,2014,341-348 [28]刘刚,王敏,黄一.扩展有限元法分析含裂纹板的剪切闭锁问题消除[J],船舶力学,2014,18(6):690-699 [29]刘刚,刘英芳,黄一.焊接结构多轴疲劳寿命预测结构应力法[A],2014年船舶与海洋结构学术会议暨中国钢结构协会海洋钢结构分会第七届理事会第三次会议,2014,312-321 [30]Liu, Gang,Liu, Yingfang,Huang, Yi.A novel structural stress approach for multiaxial fatigue strength assessment of welded joints[J],INTERNATIONAL JOURNAL OF FATIGUE,2014,63:171-182 [31]刘刚,高明,黄一.非线性分布应力对焊接接头表面裂纹扩展的影响[J],船舶力学,2014,18(3):291-302 [32]刘刚,唐柳伦,黄一.基于场强法的焊接接头疲劳寿命影响因素研究[J],船舶力学,2014,18(1):158-164 [33]Dong, Leilei,Huang, Yi,Zhang, Qi,Liu, Gang.An Analytical Model to Predict the Bending Behavior of Unbonded Flexible Pipes[J],JOURNAL OF SHIP RESEARCH,2013,57(3):171-177 [34]柏阳,李红霞,黄一,刘刚,常洪波.随机波作用下桁架式Spar平台与系缆耦合运动分析[A],中国造船工程学会2013年船舶水动力学学术会议,2013,538-544 [35]刘刚,黄一,赵一阳.基于临界面理论的焊接结构多轴疲劳寿命评估方法[J],船舶力学,2013,17(5):494-501 [36]Dong, Lei-lei,Huang, Yi,Zhang, Qi,Liu, Gang.Taper design and non-linear analysis of bend stiffeners at the riservessel interface[J],SHIPS AND OFFSHORE STRUCTURES,2013,8(2):189-199 [37]张岩,黄一,刘刚.点蚀损伤船体结构板的极限剪切屈曲强度研究[J],船舶力学,2013,17(1):102-111 [38]Dong, L.-L.,Zhang, Q.,Huang, Y.,Liu, G..Computationally efficient approaches to fatigue analysis of deepwater risers[J],Journal of Shanghai Jiaotong University (Science),2013,18(4):493-499 [39]刘刚,黄一,张崎,李红霞.基于产学研合作的全日制专业学位研究生培养与实践[J],船海工程,2012,41(6):112-115 [40]刘刚,黄一,赵一阳.复杂焊接结构多轴疲劳寿命评估方法[A],2012年船舶与海洋结构学术会议暨中国钢结构协会海洋钢结构分会第七届理事会第一次会议,2012,173-180 [41]刘刚,黄如旭,黄一.复杂焊接接头多轴疲劳强度评估的等效热点应力法[J],焊接学报,2012,33(6):10-14 [42]Liu G.,Huang Y.,Gao M..Study on effect of nonlinear distribution stress on surface crack growth at thick welded joints using finite element analysis[A],22nd International Offshore and Polar Engineering Conference, ISOPE-2012,2012,141-146 [43]黄一,陈景杰,刘刚.基于夏比试验确定船用钢板断裂韧性[J],哈尔滨工业大学学报,2012,44(4):126-130 [44]刘刚,黄一.基于临界面法的焊接结构多轴疲劳寿命预测方法[A],2012,1(1):261-269 [45]刘刚,黄一,张崎.促进学习能力和动力的课堂教学方法探讨[J],教育教学论坛,2012,31(1):146-148 [46]黄一,张崎,刘刚.Fighting Riser Fatigue with Less Effort[J],Offshore Marine Technology,2012,3:17-19 [47]陈营营,黄一,李红霞,刘刚,张崎.自升式钻井平台风暴自存状态性能分析研究[J],船海工程,2011,40(6):142-145 [48]王敏,黄一,刘刚,高明.悬臂梁与主船体界面分析[J],船海工程,2011,40(6):157-161 [49]赵炳星,黄一,刘刚,张崎.两种桩靴强度校核方法的比较[J],船海工程,2011,40(6):168-171,174 [50]黄如旭,刘刚,黄一,李勇.自升式钻井平台上层建筑与直升机平台结构强度计算载荷分析[J],船海工程,2011,40(6):153-156,161 [51]高明,刘刚,黄一,张崎,黄如旭.渔船吊装下水强度有限元分析[J],船舶工程,2011,33(6):18-21 [52]刘刚,黄如旭,黄一.复杂焊接接头多轴疲劳强度评估的等效热点应力法[A],纪念徐秉汉院士船舶与海洋结构力学学术会议,2011,216-224 [53]陈景杰,黄一,刘刚.基于最大裂纹张口位移计算应力强度因子的方法研究[J],船舶力学,2011,15(9):1041-1051 [54]刘刚,黄一,张崎,李红霞.船舶与海洋工程专业实践教学改革与校企合作探讨[J],船海工程,2011,40(4):34-36 [55]李红霞,黄一,刘刚,张崎.在海洋结构物动力学教学中引入基于问题式学习的教学方法[J],船海工程,2011,40(4):68-71 [56]Liu G.,Huang Y.,Gao M.,Li Y..Comparison of shell and solid elements for hot spot stress analysis of complex welded joints[A],21st International Offshore and Polar Engineering Conference, ISOPE-2011,2011,68-74 [57]刘刚,黄一,张崎,李红霞.船舶与海洋工程专业实践教学改革与校企合作探讨[A],2011船舶与海洋工程人才发展论坛,2011,34-36 [58]李红霞,黄一,刘刚,张崎.在海洋结构物动力学教学中引入基于问题式学习的教学方法[A],2011船舶与海洋工程人才发展论坛,2011,68-71 [59]Huang Yi,Chen Jingjie,Liu Gang,Yang Hongbiao.A new method of crack-tip opening displacement determined based on maximum crack opening displacement[J],ENGINEERING FRACTURE MECHANICS,2011,78(7):1441-1451 [60]陈景杰,黄一,刘刚.平板穿透裂纹尖端应力强度因子计算方法研究[J],哈尔滨工程大学学报,2011,32(1):129-134 [61]李红霞,黄一,刘刚,张崎.在海洋结构物动力学教学中引入基于问题式学习的[J],船海工程,2011,40(4):68-71 [62]黄一,陈景杰,刘刚.基于最大张口位移计算多条共线裂纹应力强度因子的方法研究[J],机械强度,2010,32(6):1002-1007 [63]陈景杰,黄一,刘刚.基于奇异元计算分析裂纹尖端应力强度因子[J],中国造船,2010,51(3):56-64 [64]Yi, Huang,Chen Jingjie,Gang, Liu.A new method of plastic zone size determined based on maximum crack opening displacement[J],ENGINEERING FRACTURE MECHANICS,2010,77(14):2912-2918 [65]刘刚,黄一,陈景杰,刘磊.焊接构件疲劳强度评估的热点应力法研究进展[A],2010,380-391 [66]Huang Y.,Chen J.,Liu G..A new method for calculating stress intensity factor at crack tip in a finite thickness plate[A],20th International Offshore and Polar Engineering Conference, ISOPE-2010,2010,4:183-188 [67]Huang Y.,He Q.,Wang P.,Liu G.,Zhang Q.,Li H..Numerical simulation with parallel computation for anti-corrosion system of ocean structure[A],20th International Offshore and Polar Engineering Conference, ISOPE-2010,2010,3:694-701 [68]Li Y.,Huang Y.,Liu G.,Zhang Q.,Li H.-X..A study on numerical simulation for collision response of a semi-submersible platform[A],20th International Offshore and Polar Engineering Conference, ISOPE-2010,2010,4:699-705 [69]黄一,刘刚,张崎.Ultimate Strength Assessment of Hull Structural Plate with Pitting Corrosion[J],Ocean Engineering,2010,37(17):1483-1576 [70]黄一,刘刚,张崎,李红霞.A Study on Numerical Simulation for Collision Response of a Semisubmersible Platform[A],2010,699-705 [71]张丽华,黄一,刘刚,徐丽霞.交变载荷作用下焊接残余应力场的特性研究[J],造船技术,2009,5:28-31 [72]Liu G.,Huang Y.,Wu K.,Lan J..Fatigue strength assessment of extra thick welded joints in offshore structures[A],19th (2009) International OFFSHORE AND POLAR ENGINEERING CONFERENCE,2009,246-252 [73]Zhang, Yan,Huang, Yi,Liu, Gang.A Study on Assessment of Ultimate Strength of Ship Structural Plate with Pitting Corrosion Damnification[A],8th ISOPE Pacific/Asia Offshore Mechanics Symposium,2008,159-163 [74]刘刚,黄一,陈景杰,孙宇,雷振坤.基于PVDF的拉伸状态下平板结构表面裂纹损伤检测实验研究[J],机械强度,2008,30(5):848-853 [75]Chen, Biaosong,Liu, Gang,Kang, Jian,Li, Yunpeng.Design optimization of stiffened storage tank for spacecraft[J],7th World Congress on Computational Mechanics,2008,36(1):83-92 [76]白长旭,黄一,刘刚.波流耦合作用下的立管涡激振动分析研究[J],中国海洋平台,2008,23(2):18-24 [77]Lei, Zhenkun,Pan, Xuemin,Liu, Gang,Yun, Hai,Mu, Zongxin.Micro-Raman analysis on scratch of Si surface modified by ion implantation[A],5th International Conference on Surface Engineering,2008,373-374:497-+ [78]Lei Zhenkun,Qiu Wei,Kang Yilan,Gang Liu,Yun Hai.Stress transfer of single fiber/microdroplet tensile test studied by micro-Raman spectroscopy[J],COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING,2008,39(1):113-118
