个人简历
个人简介Personal Profile大连理工大学，工业装备结构分析国家重点实验室工程力学系2004年首批入选教育部新世纪优秀人才和辽宁省百千万人才（百人层次）。主要从事工程力学、固体力学、计算材料学等学科的研究。在结构与多学科优化、面向先进制造的设计与制造工艺力学、复合材料与超材料设计、超轻材料与结构等方面取得了有意义的研究成果。主持完成973课题、国防973项目、国家自然科学基金重点项目、重大专项等一批重要科研课题，是国家自然科学基金委资助的“科研创新群体”的骨干成员和教育部创新团队的骨干成员。基于“新型飞机结构拓扑与参数优化设计”的研究成果设计的新机大部件构型，实现了型号装机应用，是“XX飞机设计的创新技术”。新型火炮轻量化设计的成果成功应用于航母装备的火炮设计。基于重点基金项目“面向增材制造的飞行器承力结构多功能化”的研究，建立了连通性、脱模、尺寸等增材制造工艺约束的描述方法以及相应的设计技术。发表学术论文200余篇，授权发明专利12项。教育经历1991.3 1994.7 大连理工大学 计算力学 博士1986.9 1987.7 武汉工业大学 固体力学 硕士1978.9 1982.7 大连工学院 工程力学 学士工作经历1999.8 至今 大连理工大学 教授1992.12 1999.8 大连理工大学 副教授1982.7 1991.2 山东建材学院 讲师团队成员Research Group增材制造与创新设计负责人：刘书田教授主要研究方向： 面向增材制造的创新设计、飞行器超轻结构、超材料结构、制造工艺力学团队成员：刘书田教授，张永存教授，陈文炯副教授，王奇博士；结构与多学科优化的理论、方法与应用国家自然科学基金委创新群体，教育部创新团队。专利 一种方向性可控的微波天线 一种方向性可控的微波天线 一种方向性可控的微带天线 铁磁物料检测装置和方法 一种基于被动悬架的电磁俘能系统 基于温度比拟连通性的可制造性约束拓扑优化方法 著作成果 结构优化导论 Design of the heat conduction structure based on the topology optimization(Chapter 26). Developments in Heat Transfer 科研项目 2004年度教育部新世纪优秀人才支持计划, 主管部门科技项目, 2004/12/31-2007/12/31, 完成 超轻多孔材料与结构创新构型设计优化新理论, 国家“973”项目 , 2005/12/31-2010/08/31, 完成 轻质材料与结构多功能化优化设计技术研究, 省、市、自治区科技项目, 2007/01/01-2010/04/14, 完成 可变体构型与控制系统一体化协同优化设计理论, 主管部门科技项目, 2009/12/02-2012/12/31, 完成 结构化超轻多孔材料的多功能化设计基础, 国家“973”项目 , 2010/10/18-2016/10/26, 完成 一体化热防护结构的优化设计研究, 国家自然科学基金项目, 2011/01/01-2013/12/31, 完成 授课信息 弹性力学 /2019-2020 /秋学期 /64课时 /4.0学分 /1040141030 拓扑优化与材料设计 /2019-2020 /秋学期 /2.0学分 /2040140221 拓扑优化与材料设计 /2019-2020 /秋学期 /2.0学分 /2040140221 拓扑优化与材料设计 /2019-2020 /秋学期 /2.0学分 /2040140221 拓扑优化与材料设计 /2019-2020 /秋学期 /2.0学分 /2040140221 弹性力学 /2019-2020 /秋学期 /64课时 /4.0学分 /1040141030 学术荣誉 教育部\
研究领域
面向增材制造的创新设计与制造工艺力学结构拓扑优化与材料设计超材料与复合材料设计可变体与可调控材料与结构设计航空航天结构力学与工程超轻材料与结构结构与多学科优化""
近期论文
[1]Li, Mingli,Gao, Renjing,Liu, Shutian,Tong, Liyong.Analysis and test of a novel pre-compressed cruciform energy harvester[J],SENSORS AND ACTUATORS A-PHYSICAL,2020,302 [2]Luo, Yunfeng,Chen, Wenjiong,Liu, Shutian,Li, Quhao,Ma, Yaohui.A discrete-continuous parameterization (DCP) for concurrent optimization of structural topologies and continuous material orientations[J],COMPOSITE STRUCTURES,2020,236 [3]童泽奇,刘杨,刘书田.面向变厚度柔性轧制工艺的帽型梁横向冲击吸能优化设计[J],力学学报,2018,51(2):462-472 [4]张永存,马广朋,王佳优,刘书田,康帅帅.Numerical and experimental study of phase-change temperature controller containing gradient cellular material fabricated by additive manufacturing[J],Applied Thermal Engineering,2019,150(1):1297-1305 [5]吴书豪,张永存,刘书田.一种考虑瞬态效应的散热结构导热路径设计的拓扑优化模型[J],计算力学学报,2018,35(5):547-551 [6]Ding, Xueshan,Tong, Zeqi,Liu, Yang,Liu, Shutian.Dynamic axial crush analysis and design optimization of a square multi-cell thin-walled tube with lateral variable thickness[J],INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES,2018,140:13-26 [7]Gao, Renjing,Li, Mingli,Wang, Qi,Zhao, Jian,Liu, Shutian.A novel design method of bistable structures with required snap-through properties[J],SENSORS AND ACTUATORS A-PHYSICAL,2018,272:295-300 [8]Li, Quhao,Chen, Wenjiong,Liu, Shutian,Fan, Huiru.Topology optimization design of cast parts based on virtual temperature method[J],COMPUTER-AIDED DESIGN,2018,94:28-40 [9]高仁璟,李明丽,王奇,赵剑,刘书田.局部加强体对预压双稳态结构跳转力学特征的影响分析[J],光学精密工程,2018,26(4):884-893 [10]刘骥,刘书田,高仁璟,仝立勇.基于压电悬臂梁的驱动器与传感器性能分析的精确解析模型[J],光学精密工程,2018,26(2):380-387 [11]高仁璟,刘川,王奇,刘书田.Topology and Shape Optimization Based Method for Miniaturization Design of Metallic Antenna[A],WCCM13,2018 [12]范慧茹,刘书田,罗云锋.Robust Topology Optimization of Additive Manufacturing Structures with Consideration of Manufacturing Tolerance and Boundary Layer Defects[A],WCCM13,2018 [13]罗云锋,刘书田.Topology Optimization Method of Structures Considering the Boundary Layer Coated by Functionally Graded Materials[A],ACSMO-2018,2018 [14]范慧茹,刘书田.Huiru Fan and Liu Shutian*, A Novel Post-processing Method Based on SIMP-MMC Framework for Topology Optimization[A],ACSMO-2018,2018 [15]张永存,梁宇静,刘书田.New design of dual-constituent triangular lattice metamaterial with unbounded thermal expansion[A],13th World Congress on Computational Mechanics,2018,1(1):1-2 [16]马广朋,张永存,王佳优,刘书田,康帅帅.Numerical and experimental study of phase-change temperature controller containing graded cellular material fabricated by additive manufacturing.[A],Chinese Conference on Computational Mechanics in conjunction with International Symposium on Computational Mechanics,2018,1(1):1-2 [17]王佳优,马广朋,孔德奎,张永存,刘书田.Experimental and numerical study of the graded metallic honeycomb heat exchanger fabricated by additive manufacturing[A],2018,1(1):1-2 [18]陈文炯, 任春晶,刘书田.Design Optimization of Underwater Acoustic Anechoic Layers Under Set Frequency Bands[A],13th World Congress on Computational Mechanics,2018 [19]王艳霞,刘海斌,刘波,元文学,刘书田,覃开蓉.运动对动脉内皮功能的调控及血流剪切力的介导作用[J],北京生物医学工程,2017,36(6):639-647 [20]Shi, Pengfei,Gao, Renjing,Liu, Shutian,Yuan, Yuan.Topology optimization-based design of metamaterial-inspired sensor with improved sensitivity[J],SENSORS AND ACTUATORS A-PHYSICAL,2017,268:83-90 [21]Wang, Qi,Gao, Renjing,Liu, Shutian.A novel parameterization method for the topology optimization of metallic antenna design[J],ACTA MECHANICA SINICA,2017,33(6):1040-1050 [22]刘立悦,刘书田.纤维增强复合材料热隐身斗篷设计[J],计算力学学报,2017,34(4):453-458 [23]史鹏飞,高仁璟,刘书田.基于模糊数学的贴片式左手超材料微结构选择方法研究[J],计算力学学报,2017,34(4):440-446 [24]Gao, Renjing,Huang, Yu,Wen, Xin,Zhao, Jian,Liu, Shutian.Method to Further Improve Sensitivity for High-Order Vibration Mode Mass Sensors With Stepped Cantilevers[J],IEEE SENSORS JOURNAL,2017,17(14):4405-4411 [25]Dong, Yanzhang,Liu, Shutian,Li, Xin.Corrected Drude model of thin circle metal rods' periodic array[J],WAVES IN RANDOM AND COMPLEX MEDIA,2017,27(3):562-570 [26]董焱章,刘书田.考虑超材料胞元间电磁耦合影响的五层模型[J],计算力学学报,2017,34(3):297-302 [27]Wang, Qi,Gao, Renjing,Liu, Shutian.Topology optimization based design of unilateral NMR for generating a remote homogeneous field[J],JOURNAL OF MAGNETIC RESONANCE,2017,279:51-59 [28]Hu, Rui,Liu, Shutian,Li, Quhao.Topology-optimization-based design method of flexures for mounting the primary mirror of a large-aperture space telescope[J],APPLIED OPTICS,2017,56(15):4551-4560 [29]刘书田,李取浩,陈文炯,张永存.拓扑优化与增材制造结合:一种设计与制造一体化方法[J],航空制造技术,2017,10:26-31 [30]Hu, Rui,Chen, Wenjiong,Li, Quhao,Liu, Shutian,Zhou, Ping,Dong, Zhigang,Kang, Renke.Design Optimization Method for Additive Manufacturing of the Primary Mirror of a Large-Aperture Space Telescope[J],JOURNAL OF AEROSPACE ENGINEERING,2017,30(3) [31]Zhang, Yongcun,Shang, Shipeng,Liu, Shutian.A novel implementation algorithm of asymptotic homogenization for predicting the effective coefficient of thermal expansion of periodic composite materials[J],ACTA MECHANICA SINICA,2017,33(2):368-381 [32]张南,张永存,陈文炯,吴书豪,刘书田.含流道微桁架夹层面板隔热性能评估方法[J],复合材料学报,2017,34(4):850-858 [33]王奇,高仁璟,刘书田.A Novel Parameterization for the Topology Optimization of Metallic Antenna Design[A],12 world congress on structural and multidisciplinary optimization (WCSMO12),2017 [34]刘书田,赵剑.Implementation of homogenization method to predict effective properties of periodic material with geometric nonlinear deformation[A],The 2017 International Conference on Innovative Structural Engineering and Mechanics(ISEM17),2017 [35]Chen, Wenjiong,Tong, Liyong,Liu, Shutian.Concurrent topology design of structure and material using a two-scale topology optimization[J],COMPUTERS & STRUCTURES,2017,178:119-128 [36]白伟,李取浩,陈文炯,刘书田.基于映射的拓扑优化最大尺寸控制方法[J],工程力学,2017,34(9):18-26 [37]高仁璟,赵剑,刘书田.Dynamic optimization of snapping through procedure of compressed bistable mechanisms[A],2017 [38]赵剑,刘书田,高仁璟.A new impedance based sensitivity model of piezoelectric resonant cantilever sensor[A],The 2017 World Congress on Advances in Structural Engineering and Mechanics (ASEM17),2017 [39]陈文炯,刘书田.Virtual-Temperature-Method Based Formulation of Topology Optimization for Design of Cast Parts[A],2017 [40]刘书田,高仁璟.The analysis on the parameters sensitivity of the microstrip line-typed metamaterials[A],2017 [41]刘书田.Topology Optimization Method for Layout Design of Stanping Structures with Flanging[A],12 world congress on structural and multidisciplinary optimization (WCSMO12),2017 [42]Wang Q.,Gao R.,Liu S.,Liu C..Topology optimization-based design method of dual-band antennas[J],Multidiscipline Modeling in Materials and Structures,2017,13(1):11-25 [43]赵剑,高仁璟,刘书田.NONLINEAR AMPLITUDE RESPONSE BASED THRESHOLD MASS SENSOR WITH COMBINATIVE PIEZOELECTRIC CANTILEVER STRUCTURES[A],2017 [44]肖山,毕金英,孙彦鹏,刘书田,刘杨.钛合金典型连接结构裂纹扩展特性分析[J],航空制造技术,2016,18:66-69 [45]Liu, Shutian,Wang, Qi,Gao, Renjing.MoM-based topology optimization method for planar metallic antenna design[J],ACTA MECHANICA SINICA,2016,32(6):1058-1064 [46]Huang, Yu,Zhao, Jian,Liu, Shutian.Design optimization of segment-reinforced bistable mechanisms exhibiting adjustable snapping behavior[J],SENSORS AND ACTUATORS A-PHYSICAL,2016,252:7-15 [47]赵剑,魏岩,高仁璟,刘书田.基于局部截面构型优化的双稳态结构跳跃阈值控制与设计[J],机械工程学报,2016,52(19):154-161 [48]Li, Quhao,Chen, Wenjiong,Liu, Shutian,Tong, Liyong.Structural topology optimization considering connectivity constraint[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,54(4):971-984 [49]Shi, Pengfei,Gao, Renjing,Liu, Shutian.Topology Optimization Based Methods and the Realization Programs for Designing Microstructures of Patched Metamaterials with Prescribed Electromagnetic Properties[J],ELECTRONIC MATERIALS LETTERS,2016,12(5):660-672 [50]Liu, Yang,Zhang, Yongcun,Liu, Shutian,Xiao, Shan,Sun, Yanpeng,Wang, Xiangming.Effect of unbonded areas around hole on the fatigue crack growth life of diffusion bonded titanium alloy laminates[J],ENGINEERING FRACTURE MECHANICS,2016,163:176-188 [51]董焱章,刘书田.开口金属环的磁谐振理论修正模型[J],微波学报,2016,32(4):10-14 [52]刘书田,刘杨,童泽奇.基于元胞自动机的变厚度薄壁梁侧向耐撞性优化设计方法[J],计算力学学报,2016,33(4):528-535 [53]Zhang Yongcun,Li Xiaobin,Liu Shutian.Enhancing buckling capacity of a rectangular plate under uniaxial compression by utilizing an auxetic material[J],CHINESE JOURNAL OF AERONAUTICS,2016,29(4):945-951 [54]Huang, Yu,Liu, Shutian,Zhao, Jian.A Gradient-Based Optimization Method for the Design of Layered Phononic Band-Gap Materials[J],ACTA MECHANICA SOLIDA SINICA,2016,29(4):429-443 [55]董焱章,刘书田.负折射率材料的实现模式及传输衰减分析[J],湖北汽车工业学院学报,2016,30(2):43-48 [56]高仁璟,张莹,赵剑,陈文炯,刘书田,仝立勇.面向结构形状控制的压电纤维复合薄膜驱动器布局方式与控制参数协同优化设计[J],机械工程学报,2016,52(18):177-183 [57]陈文炯,刘书田,张永存.基于拓扑优化的自发热体冷却用植入式导热路径设计方法[J],力学学报,2016,48(2):406-412 [58]Zhao, Jian,Gao, Renjing,Liu, Shutian,Huang, Yu.OPTIMIZATION-BASED DESIGN FOR SPECIFIC BISTABLE MECHANICS OF COMPLIANT MECHANISMS[A],ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference (IDETC/CIE),2016 [59]Chen Wenjiong,Liu Shutian,Tong Liyong,Li Sheng.Design of multi-layered porous fibrous metals for optimal sound absorption in the low frequency range[J],力学快报,2016,6(1):42-48 [61]张永存,刘书田.On the optimal design of the graded metal honeycomb heat exchanger considering the 3D temperature field of cooling fluid[A],2016 [62]刘书田,陈文炯.Topology optimization based method for design of additive manufacturing structures[A],The 12th World Congress on Computational Mechanics and the 6th Asia Pacific Conference on Computational Mechanics,2016 [63]陈文炯,刘书田.A Two-step Method of Designing Scanning Pattern with Minimized Distortion in Additive Manufacturing[A],2016 [64]赵剑,高仁璟,刘书田.Optimization based sensitivity improving method for piezoelectric mass sensor[A],2016 [65]赵剑,高仁璟,刘书田.Configuration optimization for cantilever-based high order mode resonant mass sensor[A],Joint Symposium of the 18th Annual Conference of Chinese Society of Micro-Nano Technology and Microsystems &Nanoengineering,2016 [66]赵剑,高仁璟,刘书田.Nonlinear Threshold Mass Detection through Response Amplitude Tracking[A],2016 [67]Chen, Wenjiong,Liu, Shutian.Microstructural topology optimization of viscoelastic materials for maximum modal loss factor of macrostructures[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2016,53(1):1-14 [68]王艳霞,高争鸣,刘波,刘书田,栾永,覃开蓉.一种模拟运动后颈总动脉振荡切应力的流动腔装置[J],水动力学研究与进展A辑,2015,30(6):650-656 [69]Liu, Shutian,Li, Quhao,Chen, Wenjiong,Hu, Rui,Tong, Liyong.H-DGTP-a Heaviside-function based directional growth topology parameterization for design optimization of stiffener layout and height of thin-walled structures[J],STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION,2015,52(5):903-913 [70]苏文政,刘书田.一类多孔固体的等效偶应力动力学梁模型[J],力学学报,2015,48(1):111-126 [71]张永存,杨微,刘书田.一种新型蜂窝结构的主动冷却性能分析[A],2015中国力学大会,2015,85-85 [72]王艳霞,高争鸣,刘波,刘书田,覃开蓉.一种模拟运动后动脉内皮细胞振荡剪切力环境的微流控装置[A],2015中国力学大会,2015,184-184 [73]史鹏飞,高仁璟,刘书田.基于同轴光子带隙晶体的应变传感器[J],光学精密工程,2015,23(4):956-964 [74]董焱章,刘书田.左手超材料的研究进展[J],湖北汽车工业学院学报,2015,1:30-42 [75]Liu, Shutian,Tong, Zeqi,Tang, Zhiliang,Liu, Yang,Zhang, Zonghua.Bionic design modification of non-convex multi-corner thin-walled columns for improving energy absorption through adding bulkheads[J],THIN-WALLED STRUCTURES,2015,88:70-81 [76]Zhao, Jian,Gao, Renjing,Chen, Guoxi,Liu, Shutian,Cao, Qikai,Qiu, Tao.Nonlinear coupling mechanical model for large stroke magnetic-based multistable mechanisms[J],MECHANISM AND MACHINE THEORY,2015,83:56-68 [77]Liu Shutian,Li Quhao,Chen Wenjiong,Tong Liyong,Cheng Gengdong.An identification method for enclosed voids restriction in manufacturability design for additive manufacturing structures[J],机械工程前沿,2015,10(2):126-137 [78]刘立悦,刘书田.纤维增强复合材料热隐身斗篷设计[A],2015,474-475 [79]刘书田.Topology design for maximization of fundamental frequency of couple-stress continuum[J],Structural and Multidisciplinary Optimization,2015,77(6):322-331 [80]张永存,刘书田.Investigation on the influence of Localized Unbonded-areas on the Crack Growth Characteristic of Diffusion Bonded Titanium Alloy Laminates[A],2015现任大连理工大学工程力学系和工业装备结构分析国家重点实验室教授（二级），博士生导师，工程力学系书记，飞行器轻质结构研究所所长。担任中国复合材料学会常务理事、中国复合材料力学专业委员会主任，亚洲结构与多学科优化学会执委会委员，中国机械工程学会增材制造分会常务委员。
