个人简历
教育经历Education Background1992.31995.11哈尔滨工业大学机械学博士1989.91992.3哈尔滨工业大学机械学硕士1985.91989.7大庆石油学院矿业机械学士工作经历Work Experience2007.12至今大连理工大学机械工程学院教授1998.102007.12大连理工大学机械工程学院副教授专利 一种化学机械抛光单晶氧化镁基片用的抛光液 一种粗磨粒金刚石端面砂轮的修整方法 一种新型W-Mo-Cr合金抛光盘的制备方法 一种高平面度金属超薄板的加工方法 一种金刚石刀具切削黑色金属的方法 一种密封环加工预变形力加载夹具及其加载方式 科研项目 弱刚性构件极端制造集成工艺协调控制及其知识系统研究, 国务院其他部门, 2016/01/01, 进行 高性能激光晶体超精密抛光技术与装备, 国家科技部 , 2016/07/01, 进行 复杂型面加工的能量定域耦合机理及调控方法, 国家“973”项目 , 2015/01/01, 进行 变桨滑环接触材料摩擦磨损特性研究, 自选课题, 2015/01/01-2015/06/30, 进行 300mm硅片单面抛光机（CMP）的开发, 2011/01/01-2011/01/01, 完成 电沉积Cu-ZrB2复合材料电极的快速制造技术研究, 省、市、自治区科技项目, 2006/01/01-2008/12/31, 完成 科研奖励 科技进步一等奖 教育部技术发明一等奖
研究领域
精密与超精密加工技术特种加工及其控制技术难加工材料高效加工""
近期论文
[1]Fan, Kangnan,Jin, Zhuji,Bao, Yan,Wang, Qiulin,Niu, Lin,Sun, Jing,Song, Jinlong.A facile and less-polluting electrochemical method to fabricate multifunctional superhydrophobic film on iron materials[J],COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS,2020,590 [2]Guo, Xiaoguang,Yuan, Song,Gou, Yongjun,Wang, Xiaoli,Guo, Jiang,Jin, Zhuji,Kang, Renke.Study on chemical effects of H2O2 and glycine in the Copper CMP process using ReaxFF MD[J],APPLIED SURFACE SCIENCE,2020,508 [3]Guo, Xiaoguang,Yuan, Song,Huang, Junxin,Chen, Chong,Kang, Renke,Jin, Zhuji,Guo, Dongming.Effects of pressure and slurry on removal mechanism during the chemical mechanical polishing of quartz glass using ReaxFF MD[J],APPLIED SURFACE SCIENCE,2020,505 [4]Liu, Jiyu,Zhao, Danyang,Chen, Yang,Zhang, Jichao,Wu, Libo,Yang, Zhikang,Zhang, Fan,Sun, Jing,Liu, Xin,Jin, Zhuji.Atmospheric pressure plasma jet and minimum quantity lubrication assisted micro-grinding of quenched GCr15[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2020,106(1-2):191-199 [5]Guo, Xiaoguang,Chen, Chong,Kang, Renke,Jin, Zhuji.REAXFF MOLECULAR DYNAMICS SIMULATION OF MATERIAL REMOVAL MECHANISMS DURING CMP PROCESS OF SILICA GLASS IN AQUEOUS H2O2[A],2019 [6]施远,金洙吉,姜冠楠,刘作涛,周忠正,王泽北.YG15硬质合金电化学腐蚀机理研究[J],中国腐蚀与防护学报,2019,03:253-259 [7]Shi, Zhuoying,Jin, Zhuji,Guo, Xiaoguang,Shi, Xiaolin,Guo, Jiang.Interfacial friction properties in diamond polishing process and its molecular dynamic analysis[J],DIAMOND AND RELATED MATERIALS,2019,100 [8]Guo, Xiaoguang,Huang, Junxin,Yuan, Song,Chen, Chong,Jin, Zhuji,Kang, Renke,Guo, Dongming.Effect of surface hydroxylation on ultra-precision machining of quartz glass[J],APPLIED SURFACE SCIENCE,2020,501 [9]Zhang, Shuohua,Guo, Xiaoguang,Jin, Zhuji,Kang, Renke,Guo, Dongming.Material removal characteristics of precorroded Lu2O3 laser crystals and elastic deformation model during nanoscratch process[J],TRIBOLOGY INTERNATIONAL,2020,143 [10]马进,金洙吉,朱祥龙,康仁科,李俊卿.环抛机直驱电机转台系统设计[J],组合机床与自动化加工技术,2019,9:68-71 [11]徐振哲,金洙吉,姜冠楠,施远,郭东明.控制浅小孔电解加工深度的研究[J],现代制造工程,2019,8:68-73 [12]周忠正,金洙吉,牛林,刘作涛,王泽北,施远.钨合金电化学腐蚀层性质的研究[J],新技术新工艺,2019,5:53-57 [13]万策,金洙吉,吴頔,刘作涛,司立坤.大径厚比铜片的化学机械抛光[J],金刚石与磨料磨具工程,2018,38(3):81-85 [14]孙志明,金洙吉,韩晓龙,范康男,司立坤.钇铝石榴石晶体的机械抛光工艺[J],金刚石与磨料磨具工程,2018,38(1):73-77 [15]孙晶,程玮,宋金龙,陆遥,孙延奎,黄柳,刘新,金洙吉.Fabrication of Superhydrophobic Micro Post Array on Aluminum Substrates Using Mask Electrochemical [J],Chinese Journal of Mechanical Engineering,2018,31(1) [16]牛林,金洙吉,周中正,董志刚,朱祥龙.Study on Electrochemical Effect in Electrochemical Grinding of Tungsten Alloy[A],The 21st International Symposium on Advances in Abrasive Technology,2018 [17]安润莉,韩晓龙,朱祥龙,金洙吉,白倩,郭东明.Effect of polishing plate properties on YAG crystal disk polishing[A],6th International Conference on Nanomanufacturing,2018 [18]Liu, Jiyu,Liu, Xin,Liu, Shuo,Chen, Faze,Wang, Guansong,Sun, Jin,Song, Jinlong,Huang, Liu,Zheng, Huanxi,Jin, Zhuji.Long-lasting oil wettability patterns fabrication on superoleophobic surfaces by atmospheric pressure DBD plasma jet[J],MICRO & NANO LETTERS,2017,12(12):1000-1005 [19]Liu, Ziai,Zhao, Danyang,Wang, Xuyue,Song, Jinlong,Roy, Tamal,Li, Shude,Liu, Jiyu,Huang, Liu,Liu, Xin,Jin, Zhuji.Pouring-type gravity-driven oil-water separation without water bridge[J],MICRO & NANO LETTERS,2017,12(10):744-748 [20]魏东光,金洙吉,姜冠楠.超硬涂层磨削工艺实验研究[J],精密制造与自动化,2017,2:60-64 [21]张浩然,金洙吉,王紫光,韩晓龙.聚氨酯抛光垫机械抛光钆镓石榴石晶片[J],金刚石与磨料磨具工程,2017,37(2):26-30 [22]李金元,金洙吉.高纯钨磨削加工试验研究[J],航空制造技术,2017,6:55-59 [23]Guo, Xiaoguang,Li, Qiang,Liu, Tao,Kang, Renke,Jin, Zhuji,Guo, Dongming.Advances in molecular dynamics simulation of ultra-precision machining of hard and brittle materials[J],FRONTIERS OF MECHANICAL ENGINEERING,2017,12(1,SI):89-98 [24]郭晓光,李洋,翟昌恒,康仁科,金洙吉.单晶硅多次加工时的亚表面损伤仿真分析[J],中国科技论文,2017,12(4):374-378 [25]Huang, Liu,Song, Jinlong,Lu, Yao,Chen, Faze,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J.,Parkin, Ivan P..Superoleophobic surfaces on stainless steel substrates obtained by chemical bath deposition[J],MICRO & NANO LETTERS,2017,12(2):76-81 [26]宋金龙,刘新,金洙吉.A Twice Electrochemical Etching Method to Fabricate Superhydrophobic-Superhydrophilic Patterns for Biomimetic Fog Harvest[J],Scientific Reports,2017,7:8816-8828 [27]金洙吉,谢飞,郭晓光,史双佶.单晶金刚石切削模具钢磨损机理的分子动力学仿真[J],纳米技术与精密工程,2016,14(6):410-415 [28]Li Z.,Bao Y.,Kang R.K.,Dong Z.G.,Zhou P.,Jin Z.J..An advanced support method of aircraft skin mirror milling - Fluid lubricating support[A],19th International Symposium on Advances in Abrasive Technology, ISAAT 2016,2016,874:469-474 [29]戴恒震,油艳红,戴智弘,金洙吉.使用雾化液的K9光学玻璃化学机械磨削[J],金刚石与磨料磨具工程,2016,36(4):6-12 [30]Song, Jinlong,Parkin, Ivan P.,Huang, Liu,Lu, Yao,Liu, Xin,Deng, Xu,Yang, Xiaolong,Huang, Shuai,Sun, Jing,Jin, Zhuji.Fabrication of Long-Term Underwater Superoleophobic Al Surfaces and Application on Underwater Lossless Manipulation of Non-Polar Organic Liquids[J],SCIENTIFIC REPORTS,2016,6:31818 [31]郭晓光,刘涛,翟昌恒,苑泽伟,金洙吉,郭东明.过渡金属作用下的金刚石石墨化机理研究[J],机械工程学报,2016,52(20):23-29 [32]Niu, Fangyong,Wu, Dongjiang,Ma, Guangyi,Wang, Jiangtian,Zhuang, Juan,Jin, Zhuji.Rapid Fabrication of Eutectic Ceramic Structures by Laser Engineered Net Shaping[A],18th CIRP Conference on Electro Physical and Chemical Machining (ISEM),2016,42:91-95 [33]朱祥龙,康仁科,金洙吉,张璧.Experimental research on dressing parameters of the plate in planetary double[A],2016,874:172-177 [34]刘新,宋金龙,金洙吉,徐文骥.Controllable Water Adhesion and Anisotropic Sliding on Patterned Superhydrophobic Surface for Droplet Manipulation[J],Journal of Physical Chemistry C,2016,120(3):7233-7240 [35]马广义,金洙吉,吴东江.Effects of Pulse Parameters on Weld Geometry and Microstructure in Pulsed Laser Welding Ni-base Alloy Thin Sheet with Filler Wire[J],Metals,2016,6(10):237-237 [36]宋金龙,刘新,金洙吉,赵丹阳.Superoleophobic surfaces on tainless steel substrates obtained by chemical bath deposition[J],Micro & Nano Letters,2016,12(2):76-81 [37]Liu, Jiyu,Chen, Faze,Zheng, Huanxi,Liu, Shuo,Sun, Jing,Huang, Shuai,Song, Jinlong,Jin, Zhuji,Liu, Xin.Adjusting the stability of plasma treated superhydrophobic surfaces by different modifications or microstructures[J],RSC ADVANCES,2016,6(83):79437-79447 [38]Huang, Shuai,Parkin, Ivan P.,Song, Jinlong,Lu, Yao,Lv, Cunjing,Zheng, Huanxi,Liu, Xin,Jin, Zhuji,Zhao, Danyang,Carmalt, Claire J..Power-free water pump based on a superhydrophobic surface: generation of a mushroom-like jet and anti-gravity long-distance transport[J],JOURNAL OF MATERIALS CHEMISTRY A,2016,4(36):13771-13777 [39]Guo, Xiaoguang,Zheng, Guilin,Kang, Renke,Jin, Zhuji,Guo, Dongming.光滑粒子流体动力学方法模拟石英玻璃超精密切削过程[J],硅酸盐学报,2015,44(1):142-147 [40]李娟,杨晓龙,周诗宁,金洙吉,徐文骥.铝基超疏水表面亲水微坑粘附性能研究[A],第16届全国特种加工学术会议,2015,5 [41]耿星,郭东明,金洙吉,张兰芳.精密导电滑环表面微槽车削性能[J],宇航材料工艺,2015,45(4):108-113 [42]郭晓光,翟昌恒,金洙吉,郭东明.铁基作用下的金刚石石墨化研究[J],机械工程学报,2015,51(17):162-168 [43]Guo, Xiaoguang,Zhai, Changheng,Kang, Renke,Jin, Zhuji.The mechanical properties of the scratched surface for silica glass by molecular dynamics simulation[J],JOURNAL OF NON-CRYSTALLINE SOLIDS,2015,420:1-6 [44]刘彩红,金洙吉.核主泵用流体静压密封环热装式夹具设计及预变形分析[J],机械工程师,2015,7:7-9 [45]张涛,金洙吉,王鹏川.滚镀法制备磁性磨料的工艺研究[J],电镀与涂饰,2015,34(8):449-453 [46]林佳志,金洙吉,史双佶,钟秀虹,姜冠楠.金刚石抛光用钨合金的热压烧结[J],中国有色金属学报,2015,25(3):682-689 [47]薛洪明,金洙吉,史卓颖.单晶金刚石机械研磨与化学机械抛光工艺[J],纳米技术与精密工程,2015,13(2):102-107 [48]Zhou, Ping,Dong, Zhigang,Kang, Renke,Jin, Zhuji,Guo, Dongming.A mixed elastohydrodynamic lubrication model for simulation of chemical mechanical polishing with double-layer structure of polishing pad[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2015,77(1-4):107-116 [49]翟昌恒,郭晓光,金洙吉,郭东明,张亮.光学石英玻璃纳米划痕性能仿真研究（英文）[J],强激光与粒子束,2015,02:267-271 [50]翟昌恒,郭晓光,金洙吉,郭东明,张亮.光学石英玻璃纳米划痕性能仿真研究[J],强激光与粒子束,2015,27(2):259-263 [51]李治伟,周平,金洙吉.粗糙薄层弹性体接触刚度分析[J],摩擦学学报,2015,35(1):53-58 [52]钟秀虹,郭东明,史双佶,金洙吉,林佳志.金刚石抛光用W-Mo-Cr合金粉末的机械合金化工艺研究[J],热加工工艺,2015,44(20):25-29 [53]郭晓光,金洙吉,郭东明.Simulation of nanoscratch properties of quartz glass with molecular dynamics method[J],High power laser and particle beams,2015,27(2):1-5 [54]郭晓光,金洙吉,郭东明.Modelling the effects of tool edge radius on micromachining based on smooth particle hydrodynamics simulation method[J],Int. J. Machining and Machinability of Material,2015,16(3-4) [55]郭晓光,翟昌恒,张亮,金洙吉,郭东明.光学石英玻璃纳米级加工性能[J],光学精密工程,2014,22(11):2959-2966 [56]周平,戴恒震,金洙吉,王宇,康仁科,郭东明.周向波度密封环预变形平面研磨加工中的变形分析[J],机械工程学报,2014,51(11):171-176 [57]金洙吉,史双佶.化学机械协同作用抛光金刚石的发展与研究[A],第八届中国金刚石相关材料及应用学术研讨会,2014,457-462 [58]Li, Shou-Zhe,Li, Hong,Zhang, Jialiang,Wang, Shangmin,Wang, Yong-Xing,Jin, Zhu-Ji.Effect of Transmission Line on Impedance Matching of Atmospheric-Pressure Radio-Frequency Capacitive Microplasma Discharge[J],IEEE TRANSACTIONS ON PLASMA SCIENCE,2014,42(6):1654-1660 [59]郭晓光,金洙吉,康仁科.Research on elastic-plastic transition and hardening effect on monocrystalline silicon surfaces[A],2014,101-106 [60]Guo X.,Zhang X.,Liu Z.,Zhang D.,Jin Z.,Guo D..Modelling the effects of tool edge radius on micro machining based on smooth particle hydrodynamics simulation method[J],International Journal of Machining and Machinability of Materials,2014,16(3-4):303-317 [61]吴东江,孙垚贝,牛方勇,马广义,张磊,金洙吉.激光近净成形不同颜色Al2O3陶瓷件微观组织及裂纹分析[J],硅酸盐学报,2013,41(12):1621-1626 [62]Zhou, Ping,Guo, Dongming,Kang, Renke,Jin, Zhuji.A mixed elastohydrodynamic lubrication model with layered elastic theory for simulation of chemical mechanical polishing[J],INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY,2013,69(5-8):1009-1016 [63]周平,赵杰,李治伟,金洙吉,柳滨.化学机械平坦化中晶圆姿态瞬态调整的数值模拟研究[J],机械工程学报,2013,50(1):199-204,212 [64]郭晓光,张亮,金洙吉,郭东明.分子动力学仿真过程中硅晶体位错模型的构建[J],中国机械工程,2013,24(17):2285-2289 [65]Yuan, Zewei,Jin, Zhuji,Zhang, Youjun,Wen, Quan.Chemical Mechanical Polishing Slurries for Chemically Vapor-Deposited Diamond Films[J],JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THEASME,2013,135(4) [66]郭晓光,魏延军,张小冀,金洙吉,郭东明.基于FEM-SPH耦合方法的AISI4340钢超精密切削过程仿真[J],大连理工大学学报,2013,53(4):526-531 [67]郭晓光,张亮,金洙吉,郭东明.考虑空位缺陷的单晶硅纳米级磨削过程的分子动力学仿真[J],中国机械工程,2013,24(10):1284-1288,1295 [68]郭晓光,张亮,金洙吉,郭东明.模具钢类多元合金原子间势能模型的构建[J],纳米技术与精密工程,2013,11(5):458-463 [69]霍凤伟,郭东明,冯光,康仁科,金洙吉.核主泵用斜波纹面型密封环超精密磨削方法[J],机械工程学报,2013,49(5):154-160 [70]冯光,霍凤伟,康仁科,金洙吉,郭东明.核主泵用流体静压密封环圆锥面高精度磨削实现策略[J],摩擦学学报,2013,33(1):6-13 [71]吴东江,张天武,马广义,刘士博,范聪,金洙吉.连续激光焊接Fe-Ni合金工艺参数对焊缝形貌的影响[J],中国激光,2013,40(3):0303003 [72]戴恒震,金洙吉.Chemo-mechanical grinding for K9 optical glass[A],2013,102(10226680):57-60 [73]戴恒震,金洙吉.Chemical Mechanical Grinding Wheel for K9 Optical Glass[A],2013,712(1):579-583 [74]郭晓光,金洙吉,周平.An FEM-SPH Coupling Model for Ultra-precision Cutting of AL6061[A],2013,1(1):77-81 [75]李强,金洙吉,苑泽伟,李伟思,郭东明.单晶金刚石机械研磨结合化学辅助机械抛光组合加工工艺[J],纳米技术与精密工程,2012,11(4):369-374 [76]Zhou, P.,Kang, R.,Jin, Z.,Guo, D..Simulation of cmp process based on mixed elastohydrodynamic lubrication model with layered elastic theory[J],Advanced Materials Research,2012,565:330-335 [77]Guo X.,Wei Y.,Jin Z.,Guo D..Simulation research on ultra-precision cutting of mould steel with diamond tool[J],International Journal of Nanomanufacturing,2012,8(4):326-339 [78]周平,郭东明,康仁科,金洙吉.电化学机械平坦化抛光垫混合软弹流润滑行为数值研究[J],机械工程学报,2012,48(7):180-185 [79]郭晓光,金洙吉,郭东明.Research on Cutting Mechanism of K9 Glass Through Scratching Tests and Numerical Simulation via SPH[A],2012,1(1):134-143 [80]金洙吉.Polishing CVD diamond wafer by compound methods[J],International Journal of Machining and Machinability of Materials,2012,11(1):69-832017.112021.11中国机械工程学会特种加工分会 理事 2017.112021.11中国机械工程学会生产工程分会光整加工专业委员会 常务委员兼秘书长 2017.112021.11中国机械工程学会特种加工分会电化学加工技术委员会 委员
