个人简历

2016.01—至今 大连理工大学，材料学院，副教授、研究生导师
2014-04—2016.01 大连理工大学，材料学院，讲师、研究生导师
2012.05—2014.04 大连理工大学，材料学院，师资博士后
2008.09—2012.04 哈尔滨工业大学，材料学院，材料加工工程，博士
2006.09—2008.07 哈尔滨工业大学，材料学院，材料加工工程，硕士
2001.09—2006.07 山东大学，材料学院，材料加工工程，学士

研究领域

物理外场作用下的合金凝固组织控制
电磁场作用下相分离及合金提纯
高性能复合材料制备
有色合金电磁场连续铸造技术 "物理外场作用下的合金凝固组织控制
电磁场作用下相分离及合金提纯
高性能复合材料制备
有色合金电磁场连续铸造技术 "

近期论文

[1] J.C. Jie, Q.C. Zou, J.L. Sun, Y.P. Lu, T.M. Wang, T.J. Li, Separation mechanism of primary Si phase from the hypereutectic Al-Si alloy using rotating magnetic field during solidification, Acta Materialia, 2014, 72, 57-66
[2] J.C. Jie, C.M. Zou, H.W. Wang, B. Li, Z.J. Wei, Enhancement of mechanical properties of Al-Mg alloy with a high Mg content solidified under high pressures, Scripta Materialia, 2011, 64(6), 588-591
[3] J.C. Jie, C.M. Zou, H.W. Wang, Z.J. Wei, T.J. Li, Thermal stability of Al-Mg alloys after solidification under high pressures, Journal Of Alloys and Compounds, 2014, 584, 507-513
[4] J.C. Jie, C.M. Zou, E. Brosh, H.W. Wang, Z.J. Wei, T.J. Li, Microstructure and mechanical properties of an Al-Mg alloy solidified under high pressures, Journal Of Alloys and Compounds, 2013, 578, 394-404
[5] J.C. Jie, C.M. Zou, H.W. Wang, Z.J. Wei, T.J. Li, Precipitation in Al-Mg solid solution prepared by solidification under high pressure, Materials Characterization, 2014, 87, 19-26
[6] J.C. Jie, Q.C. Zou, H.W. Wang, J.L. Sun, Y.P. Lu, T.M. Wang, T.J. Li, Separation and purification of Si from solidification of hypereutectic Al-Si melt under rotating magnetic field, Journal Of Crystal Growth, 2014, 399, 43-48
[7] J.C. Jie, C.M. Zou, H.W. Wang, B. Li, Z.J. Wei, Mechanical properties of Al(Mg) solid solution prepared by solidification under high pressures, Journal Of Alloys and Compounds, 2012, 510, 11-14
[8] J.C. Jie, C.M. Zou, H.W. Wang, Z.J. Wei, Microstructure evolution and precipitation of Al-12Mg alloy solidified under high pressure, Journal Of Alloys and Compounds, 2010, 506(1), L12-L15
[9] J.C. Jie, C.M. Zou, H.W. Wang, Z.J. Wei, Microstructure evolution of Al-Mg alloy during solidification under high pressure, Materials Letters, 2010, 64(7), 869-871
[10] J.C. Jie, J.L. Zhao, H. Chen, Y. Fu, Z.Q. Cao, T.J. Li, Effect of Ni-based conversion coating and Ni-P electroless plating on the bonding process of pure Al and AZ31 alloy, International Journal of Materials Research, 2014, 105, 462-468
[11] Q.C. Zou, J.C. Jie, S.C. Liu, T.M. Wang, G.M. Yin, T.J. Li, Effect of traveling magnetic field on separation and purification of Si from Al-Si melt during solidification, Journal Of Crystal Growth, 2015, 142, 101-107
[12] Q.C. Zou, J.C.Jie, J.L. Sun, T.M. Wang, Z.Q. Cao, T.J. Li, Effect of Si content on separation and purification of the primary Si phase from hypereutectic Al-Si alloyusing rotating magnetic field, Separation and Purification Technology, 2015, 142, 101-107
[13] P.C. Zhang, J.C. Jie, Y. Gao, H. Li, T.M. Wang, T.J. Li, Preparation and properties of TiB2 particles reinforced Cu-Cr matrix composite, Materials Science and Engineering A, 2015, 642, 398-405
[14] Y. Gao, J.C. Jie, P.C. Zhang, J. Zhang, T.M. Wang, T.J. Li, Wear behavior of high strength and high conductivity Cu alloys under dry sliding Transactions of Nonferrous Metals Society of China, 2015, 25(7), 2293-2300
[15] Y. Gao, J.C. Jie, P.C. Zhang, T.M. Wang, T.J. Li, Corrosion behavior of new tin brass alloys with slightly different Zn content in salt spray environment, Corrosion, 2015, 71, 961-976
[16] Y. Fu, J.C. Jie, L. Wu, J. Park, J.B. Sun, J. Kim, T.J. Li, Microstructure and mechanical properties of Al–1Mn and Al–10Si alloy circular clad ingot prepared by direct chill casting Materials Science and Engineering A, 2013, 561, 239-244
[17] P. Zhang, J. Jie, H. Li, T. Wang, T. Li, Microstructure and properties of TiB2 particles reinforced Cu-Cr matrix composite, Journal Of Materials Science, 2015, 50(9), 3320-3328
[18] H. Li, J.C. Jie, H. Chen, P.C. Zhang, T.M. Wang, T.J. Li, Effect of rotating magnetic field on microstructure and properties of Cu-Ag-Zr alloy, Materials Science and Engineering A, 2015, 624, 140-147
[19] J.L. Zhao, J.C. Jie, F. Chen, H. Chen, T.J. Li, Z.Q. Zhi, Effect of immersion Ni plating on the interface microstructure and mechanical properties of Al/Cu bimetal, Transactions of Nonferrous Metals Society of China, 2014, 24, 1659-1665
[20] Y.B. Zhang, J.C. Jie, L. Wu, Y. Fu, M. Li, Y.P. Lu, T.J. Li, Microstructure and mechanical properties of Al-8%Si alloy prepared by direct chill casting under electromagnetic and ultrasonic fields, Metallurgical and Materials Transactions A, 2014, 45(4), 2014-2022

期刊Materials & Design, Materials Science and Engineering A，Journal of Alloys and Compounds，Separation and Purification Technology, Science of Advanced Materials, Journal of Applied Physics, Journal of Materials Research, Journal of Materials Engineering and Performance及Transactions of Nonferrous Metals Society of China审稿人